Scotsman C0322 Prodigy Plus, C0522 Prodigy Plus User Manual

Instructions

Kit Number: KBT42

use with ID150 and C0322, C0522, N0422, N0622, N0922, N1322

Includes:

Description Qty.
Cover, Gray 1
Lid Assembly 1
Bracket 2
#8 Screw 6
RTV 1
Label 1
Acorn Nut, 8-32 Nylon 2
Sealing Washer 2
Baffle, Ice 1
8 Nylon Washer 2
Insulation Strip 1

1. Unpack kit.

2. Place insulation strip (item 12) over studs on the baffle and insert baffle assembly into
the adapter lid.

3. Place (2) sealing washers (item 9) over studs and (2) flat washers (item 11), then
fasten in place with (2) plastic acorn nuts (item 8).

4. Set ice maker lid on the top of the dispenser.

5. Using the slotted holes in the lid as a template, drill four (4) .140Idiameter (9/64I)
holes at the bottom of the slots (see detail A). Use extreme care not to drill into the
hopper. Fasten the lid to the dispenser with four (4) #8 sheet metal screws, two on each
side.

6. Seal the ice maker to the top of the dispenser as follows:

A. Run beads of RTV around the opening in the lid and inside of the perimeter of the ice
maker outline so that the ice maker will set on the RTV.

B. Set the ice maker onto the lid and position it as required.

C. Wipe away the excess RTV.

620201014

7. Drill 9/64” diameter holes into the ice maker cabinet using the bracket as a template.
Use extreme care not to drill into any ice maker components (condenser, tubing, etc.).
Secure the brackets using the screws provided

8. Follow the ice maker manual’s manufacturers instruction to complete the installation
of the ice maker.

Install Baffle