Scosche Industries IBHPK User Manual

LED CHART

LED/COLOR

Blue LED Blinking

Blue LED Solid (Headphones)
Blue LED Slowly Blinking (Transmitter)

Red and Blue LED Solid
(Violet Hue)

Red LED Solid

Red LED Off

Connected with Bluetooth®

Headphones or Bluetooth Receiving Device

Charging and Conected with Bluetooth® Device

Battery is Currently Charging or Low Battery

STATUS

Paired Mode

Charging Complete

TROUBLE CHART

PROBLEM

Difficulty paring Headphones and Transmitter

Difficulty pairing Headphones and Bluetooth
cell phones.

Headphones drop wireless link less than 30
feet away.

Headphones or Transmitter loses wireless for
no reason.

No Audio heard from transmitter.

Make sure both devices have been recently
charged. These products will have trouble pairing
on low battery voltage. 2) make sure you power
on the UBHP first, then the transmitter.

Make sure reciever is powered ON first. 2) Make
sure your cell phone's Bluetooth® power is enabled
and it is looking for devices, If needed, consult
your cell phone's manual for information on
pairing or discovering Bluetooth devices for
your particular phone.

The connection range varies on the surrounding
environment. Range is not guaranteed to be 30
feet in all cases. Range can be reduced by other
competing electronic devices such as: Cordless
Telephones, Microwaves and Typical household
electronics. Range can also be reduced.

Check for other competing Bluetooth® or 2.4Ghz
electronic devices in close proximity to the
transmitter or UBHP head phones. Power down
these competing devices.

Check to make sure the two products successfully
paired and both devices are powered ON.

2) Make sure you are within range of the trans­mitter. 3) Make sure source volume is not muted.

4) make sure headphone "I/O" switch is set for
INPUT.

TIP/SOLUTION

®

LIMITED WARRANTY

Scosche Industries Inc. warrants this product to be free from defects in material and workmanship for a period of 90 days from prurchase. This
Scosche product is sold with the understanding that the purchaser has independently determined the suitability of this product. This warranty
is offered to the original purchaser of the product only. This warranty does not cover the product if physically damaged, subject to negligence
or misuse, abuse, alteration, accident, or an act of GOD. This warranty does not apply to product which has water or physically damaged by
accident or which has been miss used, disassembled or altered.

The original dated sales slip or proof of purchase will establish warranty eligibility. If the product should prove defective within the warranty period,
return the product with proof of purchase to Scosche Industries Inc. Scosche, at its option, will replace or repair the product free of charge and
return the product postage paid.
In no event shall Scosche Industries, Inc. be responsible for claims beyond the replacement value of the defective product, or in any way be liable
or responsible for consequential or incidental damages. No empress warranties and no implied warranties, whether for fitness or any particular use
or otherwise, except as set forth above (which is made expressly in lieu of all other warranties) shall apply to products sold by Scosche. Scosche
Industries cannot be held responsible for discrepancies/inconsistencies that may occur due to automotive manufacturing changes or option.

This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:1) This device may not
cause interference, and 2) this device must accept any interference that may be received, including interference that may
cause undesired operation. The manufactirer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. Such modification could void the user's authority to operate the equipment

IBHPK

UNIVERSAL WIRELESS BLUETOOTH

®

HEADPHONES WITH IPOD TRANSMITTER KIT

Congratulations on your purchase of the Scosche IBHPK Bluetooth Wireless Headphones & Transmitter Kit.
This system incorporates the latest Bluetooth® technology for your Bluelife wireless lifestyle. Before using,
please read manual carefully.

FEATURES/SPECS:

BLUETOOTH HEADPHO NES:

.

Cutting-edge ergonomic folding design

.

2.5mm male to 3.5mm male adapter cable included

.

Female 3.5mm to Male RCA cable included

.

Built in Lithium-ion 6-7 hour Rechargeable Battery

.

Supports Profiles: A2DP/AVRCP,HFK

IPOD BLUETOOTH TR ANSMITTER

Lithium-ion Rechargeable Battery: Up to 10 hours of use. (450mAh capacity)
Designed with 30-pin iPod bottom dock (All iPods with bottom dock connector)
Wireless Range: Up to 30 Feet (10 Meters)
Bluetooth V1.2
Transmitter Power < 3dbm
Receiver Sensitivity: -78+4dm
Supported Profiles: Advanced Audio Distribution Profile (A2DP) / Audio Video Remote
Control Profile (AVRCP)
Hands-Free Profile (HFP)
Frequency Range: 2.4Ghz - 2.4835Ghz
Dimensions: 55x40x10mm
Weight: 16 grams
Certifications: FCC

®

®

OVERVIEW

ILLUSTRATION 1

1. Volume Down; Track Backward

2. Power On/Off & Cell phone

3. Volume Up; Track Forward

4. Dual Red/Blue LED Indicators

5.Transmitter Power Button

6. Transmitter Charge Port

ILLUSTRATION 1

2

4

®

®

.

2.5mm Switching Input/Output port allows
UBHP to act as a wired headphone system
or a Bluetooth® stand-alone receiver.

.

USB Charging "Y" Cable

5

6

1

3

IBHPK

If you have any further questions, call our TOLL FREE number:

TECHNICAL HELP LINE 1-800-361-3695 Ext.3

6 1

CHARGING

NOTE: Will also charge your iPod until transmitter charge is full.
Before using this for the first time, charge the headphones and transmitter for a full 2.5 hours.
A cable is provided in the kit for charging.

1. Plug the Mini cable end of the charger cord into the charging jack as shown in Illustration 2.

2. Connect USB Cable to an available PC/Laptop USB port or 110v AC USB wall adapter/
power supply. (AC adapter not included).

3. Charge Battery for 2.5 hours (LED will illuminate RED when charging).

4. The RED LED will turn off when charging is complete. Unplug each device and enjoy up to
5 hours of use.

5. Purchase wall and car adapters to charge at home and/or on the road.
(IPPWR / IP2IN1 - Sold Separately)

ILLUSTRATION 2

CHARGING CONNECTIONS

NOT TO SCALE

SCOSCHE UBHP
HEADPHONES

OPTIONAL

WALL ADAPTER

(NOT INCLUDED)

USB

CABLE

IPBTT Transmitter

WALL OUTLET

PAIRING

GENERAL PAIRING NOTES:

1. Keep the Bluetooth® products within a distance of 3 ft. ( 1 meter) when pairing.

2. These products are designed for AUTO-pairing function and no user input should be
required. If for any reason you are asked for a passcode by any Bluetooth® device,
always use "0000".

3. As a general rule, power the receiving device FIRST before the transmitting device.
(Headphone is the receiver)

4. Compatible devices must be Bluetooth® v1.2 supporting A2DP profile.

5.Turn off any other nearby Bluetooth® devices, such as a cell phone or headset as this
may hinder pairing process between your devices.

6.Pairing can take up to 1 minute, sometimes more. Once initial pairing is complete between
your headphones, transmitter and Bluetooth® phone, reconnecting during normal use
occurs in a fraction of the time.

PAIRING UBHP HEADPHONES TO THE IPBTT TRANSMITTER:

1. Press the Power Button on the UBHP headphones for 3 seconds. Blue LED will flash indicating pairing
mode.

2. Press the power Button on the IPBTT transmitter for 3 seconds. Blue LED will flash quickly indicating
pairing mode.

3. Pairing should occur within 1 minute but can take up to 5 minutes. Blue LED will stop flashing on the
headphones and flash slowly on the transmitter.

4. Plug the transmitter into your iPod bottom dock. You should hear the audio through your Bluetooth®
Headphones.

5. If you are successful pairing the devices, repeat steps 1-4 above. Make sure receiving device is powered
first as suggested in pairing notes and power off any other Bluetooth® mobile devices. If you still cannot
successfully pair the devices, go to the TROUBLESHOOTING steps i this manual or call Tech Support
at [phone] Ext.3

2

PAIRING CONTINUED

PAIRING UBHP HEADPHONES TO A BLUETOOTH® CELL PHONE:

1. Place headphones and Bluetooth cell phone with in 3 ft. (1m) of each other.

2. Ensure headphone power is off.

3. Press the power button on the right earpiece for 3 seconds. The Blue LED will flash indicating pairing mode.

4. While the headphone LED is flashing Blue, follow the instructions for your cell phone to seek (or discover)
any Bluetooth® devices. You will be pairing the Scosche Bluetooth® headphones to your phone just like you
would pair any Bluetooth® handset or hands-free kit. If needed, consult your cell phone's manual for
information on pairing or discovering Bluetooth® devices for your particular phone.

5. Your cell phone should display a list of local Bluetooth® devices. The Scosche headphones should be
displayed as a device named "SCOSCHE" Headphones.

6. Select this device and your cell phone should connect to this device automatically. If your phone happens
to ask for a password (or passcode) then enter "0000".

7. Bluetooth® pairing should now be complete. (Blue LED on solid) If your phone fails to locate the Scosche
headphones, then check to make sure your phone is seeking Bluetooth® devices. Check to make sure the
Scosche headphone power is switched ON and the LED light is flashing Blue indicating "pairing" mode.
Repeat steps 1-6 if you cannot successfully pair the two devices, or go to the TROUBLESHOOTING steps
in this manual or call Tech Support at [phone] Ext.3.

8. Place the headphones over your ears and make a test call from your cell phone. Your cell phone audio
should be heard through the headphones.

HEADPHONE & TRANSMITTER OPERATION

POWER ON/OFF NOTE:

Under normal use, we suggest powering on the headphones (receiver) first, then power on your Bluetooth®
transmitter. This method will produce the shortest connection time between the devices. if using a
Bluetooth® cell phone, then connect to the headphone AFTER the transmitter is connected as the third
device in your group. If you have previously paired with your Bluetooth® cell phone, then select the Scosche
headphones from the Bluetooth® device list and choose to connect.

POWER ON OFF: Press the Power Button for 3 seconds to turn the transmitter ON or OFF

CONNECTION

Connect IPBTT to the bottom dock of your iPod. Turn the IPBTT on, then turn on your
Bluetooth® headphones or receiving device. Once the two devices are paired, enjoy the audio.

REMOTE CONTROL SOURCE FUNCTIONS

ONLY when used with device that support the AVCRP profile for remote
control functions. ( Scosche Bluetooth® headphones - UBHP)

- PLAY/PAUSE
Press the power button on your Bluetooth® headphones (or other receiving devices)

to PLAY or PAUSE the current track. Do not hold down the power button for
for more than 1 second or it may turn off the power.
(NOTE: Volume control will no longer be controlled through iPod wheel, only
through Bluetooth® device controls).

- TRACK UP/DOWN

1. Press and hold the volume up button to skip forward to the next track.

2. Press and hold the volume down button to skip back to the beginning of the song.

3. To track to previous song press and hold immediately after step (2).

CELLULAR OPERATION

INCOMING CALL ANSWER:

With your UBHP headphones powered and a Bluetooth® wireless link established, a ring tone will be heard
inside the headphones when you receive an incoming phone call. Simply press and release the Power
Button to ANSWER an incoming call. If you were listening to music at the time, it will be interrupted during
your call. You will hear the other party through the left headphone speaker and they will hear you through
the built-in microphone on the right earpiece. The audio will return when the call ends.

ENDING A CALL:

When you are finished with the call, simply press and release the Power Button to END the call.

CELLULAR RE -CONNECTING:

Once you have initially paired your cell phone with the UBHP Bluetooth® headphones, operating steps may
vary when needing to re-establish a Bluetooth® link between the headphones and cell phone. Some
phones may attempt to reconnect automatically as soon as they "see" the UBHP and some phones may
require you to select the "Scosche" headphones from a list of cataloged Bluetooth® devices in your
particular phones memory. If needed, consult your cell phone’s manual for information on connecting to
Bluetooth® devices for your particular phone.

3