4
INSTALLATION GUIDE
Step 8
Step 9
Step 10
Use a panel removal tool to pop
up center dash panel (hood)
above stereo and remove.
INSTALLATION NOTE:
Base model units need no further assembly. Re-use storage tray above stereo.
4.3” OEM Display units: Attach the separate sub-panel designed to accomodate
the Factory OEM dash display to upper rear of new stereo panel with hardware
provided.
Attached included cylinder guides (1) on each bracket as shown. Mount
left/right brackets to aftermarket radio.
Follow installation steps in reverse order to re-assemble the vehicle.
FD6211DDB
FD6211SDDB
ISO Double DIN Installation Kit for
2014-UP Ford Transit
(w/removable PASSENGER airbag indicator)
This premium installation kit is for 2014-UP Ford Transit vehicles (w/removable PASSANGER airbag indicator) with base
model radio (dash modication required). Included are all the parts you need to mount your car stereo or CD player into
your vehicle’s dash. Refer to individual instruction in this manual to remove your vehicles factory radio and assemble the
kit.
PRT (Panel Removal Tool)
Screwdriver
2
3
INSTALLATION GUIDE
INSTALLATION GUIDE
Step 2
Step 1
Step 3
Extract (2) screws from panel
exposed in step #1.
Use a panel removal tool to pop
up center dash panel (hood)
above stereo and remove.
Use a panel removal tool to
pop out dash/Stereo control
panel.
Unplug connectors and remove
control panel from vehicle.
Remove (2) Torx bolts at top of
OEM radio chassis. Unplug
and
remove from vehicle.
Unclip and remove Factory air
vents hazard /airbag indicators
from the original panel.
Remove panel mounting clips to
re-install on new stereo panel
Step 4
Step 5
Step 6
Step 7
SOLD SEPARATELY
1997-UP Euro/
Fakra Antenna Adapter
FD02SR
2012-UP Ford Stereo
Replacement Interface
FD02SR
• Steel Mounting Brackets
• Accomodated Base and Vehicles with 4.3” OEM dash display
FEATURES
Loading...