For the full
interactive
experience use
Adobe PDF
Reader on your
smart device
Quick Install Guide
Control Menu
Wiring Accessories
for a Smarter Home
Contents
Smart Box & Application
Installation & Control Manual
(Rev1.1)
Installation Check List
Prev Page Next Page
Contents
Before you begin
Congratulations on purchasing the Click Smart Box (CSB040), an element of the Click
Smart control system.
This instruction manual provides information on installing and operating the smart box
and applications.
Only perform the Click Smart installation after becoming thoroughly familiar with this
manual and the system functions.
The applications enable control of Click Smart receivers mounted within range of the
smart box using radio frequency.
The smart device (phone or tablet) must be on the same Wi-Fi network and within
range of the router to ensure full functionality is achieved.
It is recommended only one smart device is used at a time to set up the smart box.
Setup data sent from multiple smart devices may cause the smart box to malfunction.
Signal Range Test
We recommend prior to commencing with any Click Smart installation, a basic signal
range test is carried out to test the transmission range through the variable building
and furniture materials, as these can have an inuence in how the system performs.
Each receiver is supplied with an ‘installation guidelines’ sheet to help ensure any
potential installation issues are kept to a minimum. The installation guidelines sheet
can be downloaded from www.click-smart.com/tech_specs.
When using the smart box for signal range testing, follow the installation procedures
in this manual. We recommend either to add the plug-in receiver (RFSC-61) to the
application and smart box and signal range test by controlling the socket throughout
the property ensuring it operates successfully at each location, or to test all the
receivers already installed and ensure they operate successfully.
In the event the receiver(s) do not operate in certain areas of the installation, the
solution may be to install a signal repeater (RFRP-20/B).
If a signal repeater is required, follow the repeater installation leaet supplied.
Shipping & Disposal
Problem-free function of any Click Smart device also depends on the way it was
shipped, stored and handled. If you notice any signs of damage, deformation,
malfunction or missing parts, do not install and return it to the point of sale.
At the end of its service life, the product and its parts must be treated as electronic
waste. Before starting the installation, make sure that all wires and connected parts
are not under voltage. When assembling and performing maintenance, you must
uphold safety regulations, standards, directives and special provisions for working
with electrical equipment.
www.click-smart.com
Previous Next
2
Installation Check List
Prev Page Next Page
Contents
Smart Box Introduction
What Is In The Box? ................................................................................... 5
Smart Box Installation ................................................................................ 5
Preparation ................................................................................................... 6
Receiver Information .................................................................................. 6
Operating System ...................................................................................... 6
Quick Installation Guide & Check List ........................................................ 7
Application Installation Guide
Pairing the Smart Box ................................................................................ 9
Adding ‘Room’ names .............................................................................. 10
Adding the receiver ‘Elements’ .................................................................. 11
Creating ‘Scenes’ ..................................................................................... 13
Switching Receiver - Function Settings ...................................... 14
Dimming Receiver - Function Settings ....................................... 15
Shutter Receiver - Function Settings .......................................... 16
Manual Settings (From Within Application)
Settings Menus ........................................................................................ 17
Smart Box (Conguration) ........................................................................ 18
Elements .................................................................................................. 20
Rooms ...................................................................................................... 21
Scenes ..................................................................................................... 22
Switching Receiver - Function Settings ...................................... 23
Dimming Receiver - Function Settings ....................................... 24
Shutter Receiver - Function Settings .......................................... 25
Time Schedules ........................................................................................ 26
Select Elements & Functions ..................................................... 27
Assign Day, Times & Function .................................................... 29
Amend, Remove & Copy Times ................................................. 32
Activate ....................................................................................... 33
Advanced Settings ................................................................................. 34
Update, back up and restore data to the smart box. White background option.
Application Control
Switching .................................................................................................. 36
Dimming ................................................................................................... 37
Shutter ...................................................................................................... 38
Scenes ..................................................................................................... 39
Error Messages
Setup ................................................................................................... 40
Control ................................................................................................. 41
www.click-smart.com
Previous Next
3
Installation Check List
Prev Page Next Page
Contents
Introduction
With the CSB040 Click Smart Box connected to your router (Ethernet cable), it then
enables you to control your Click Smart wireless control system by smart phone or
tablet devices utilising the Click Smart application.
The smart box communicates using the frequency 868MHz and enables the control
of up to 40 Click Smart receivers from one location.
The Click Smart applications are available for Android and iOS devices, with the
system offering the following functionality:
- Switching appliances (lighting, sockets, garage doors, blinds, fans etc.)
- Dimming lights (LED, energy-saving, halogen or incandescent)
- Time delay settings (delayed switching off of light when leaving room)
- Scenes (control multiple receivers with a single press)
- Automated control of receivers when programming time schedules
Thanks to the bi-directional communication, the smart box enables the current
status of individual receivers to be visible on the controlling smart devices.
During setup of the smart box, the IP address will be allocated automatically via
DHCP (Dynamic Host Conguration Protocol) and then to static. The static IP will
ensure the IP address does not change in the event of a power outage occurring.
The smart box can be powered using the plug-in adapter 10-27V DC (supplied) or
via the USB power input (USB cable not supplied).
The package includes an antenna. If the smart box is mounted within a metal
enclosure or to help improve the signal range, the antenna (AN-E) can be installed
(purchase separately).
The maximum tightening torque for the antenna connector is 0.56 Nm.
The smart box transmits up to 100 metres in open space. If the signal is insufcient
between the smart box and receivers the signal repeater (RFRP-20/B) can be used.
Attention:
The minimum distance between the smart box and any receiver is one centimetre.
Smart Box & Application Parameters:
• Maximum number of receivers - 40
• Maximum number of rooms - 40
• Maximum number of scenes - 20
• Maximum number of receivers within a scene - 20
• Maximum number of daily time schedule events - 4 x On & 4 x Off
• Maximum number of receivers that can be added to a time schedule - 10
• Maximum number of smart boxes controlled by one application - 6
• Maximum number of smart devices controlling one smart box - 8
www.click-smart.com
• It is designed for smart devices with Android 4.0 or iOS 9 and higher
• Suitable for smart devices with a display resolution greater than 800 x 480
• The application language follows the language set in the OS system
Previous Next
4
Installation Check List
Prev Page Next Page
What Is In The Box - CSB040
Contents
1. Click Smart Box
2. 230V~ Plug In Adaptor
3. Ethernet Cable
Smart Box Installation
Connect the Smart Box to the power source and using the
Ethernet cable connect it to your local router.
Your local network (router) automatically assigns the smart
box its IP address. Dynamic IP address assignment (DHCP)
which is then set as static.
Download and install the ‘CLICK SMART’ application on to
your smart phone or tablet:
• For Android devices: Download via Google Play.
• For iOS (Apple) devices: Download via the App Store.
Router
Click Smart
Receivers
Attention:
To help improve the signal quality to and from the smart
box, ensure the smart box is NOT mounted directly on or
next to the router.
www.click-smart.com
Previous Next
5
Smart Box
Installation Check List
Prev Page Next Page
Preparation - Receiver Information
To assist with the conguration of the
application, ensure the receiver type,
hexadecimal address and location is noted for
each receiver installed on the installation sheet
provided (example shown).
Without the receiver type and correct
hexadecimal address, the receiver details cannot
be added to the application.
Alternatively an interactive PDF installation
sheet can be downloaded from:
www.click-smart.com/Tech Specs.
Application Installation Sheet
Contents
www.click-smart.com
Room Name (30 Chars) Element (30 Chars) Receiver Type Address
1
Lounge Wall Lights RFDEL-71B 012345
2
Lounge Table Lamp RFSC-61 0ABCDE
3
Outdoor Front Light RFSAI-61B 0022AB
4
Outdoor Rear Light RFSA-61M 0EE456
Installation: ......................................................................................
1 Smart Home
Operating system running the latest update?
Prior to starting the application we recommend the smart
device is running the latest operating system software
updates.
This will help ensure the Click Smart application runs at
its full potential for that device.
When starting the application, the initial screen will ask
this prior to continuing.
Standard Design White Design
www.click-smart.com
Previous Next
6
Black Or White Background
The standard application is
designed with black background. If
a white background is preferred, the
background can be changed within
advanced settings once setup has been
completed, see page 34.
ContentsPrev Page Next Page
Preparation - Quick Installation Guide & Check List
To assist in the setting up of the smart box and applications, we recommend the
following process is followed.
Installation Sheet (printed copy supplied)
Document list of rooms, receivers, receiver type and receiver address page 6
Range Test
Carry out range test, (a repeater RFRP-20/B may be required) page 2
Smart Box Setup
Wire Smart Box to router using Ethernet cable page 5
Ensure both router and Smart Box are powered
Ensure the Smart device’s Wi-Fi is connected to the same router as
the Smart Box page 5
Application Guide - Setup
Pair the Smart device app to the Smart Box page 9
Assign name to Smart Box page 9
Conrm pairing the Smart Box with grey circular icon turning blue page 9
Add room/location names and assign icon page 10
Add elements/receivers and assign its icon and room/location page 11
Create scenes (if required - can create scenes later if preferred) page 13
Control Menu
This manual is available to access from within the applications via the ‘Help’ links
displayed within the ‘settings’ menus.
Once the smart box has been setup and operational, when pairing additional smart devices
to the same smart box all the programmed data will automatically be uploaded.
www.click-smart.com
Previous Next
7
Installation Check List
Prev Page Next Page
Application Installation Guide
Contents
Pairing The Smart Box
Add Rooms
Add/Assign Elements
Create Scenes
With the preparation completed, the application can
be opened.
The initial screen is a reminder to ensure the latest
operating system update is running on the smart
device.
Exit to check the smart device settings or with the
latest update running, Continue
Note:
There are minor variations between the Android and
iOS applications with regards the information displayed,
e.g. once the smart box is paired the Android version
refers to the smart box IP address where iOS refers to
the name assigned to the smart box.
The Welcome screen offers initial access to the easy setup application guide.
The guide allows the following features to be set up:
• Rooms - Add room names and icon
• Elements - Add receivers, icon and assign the element to its room
• Scenes - Select the elements and command to be operated with a single press
(can be setup afterwards if preferred)
Press ‘START’ to continue with the easy setup guide.
Alternatively if preferring to ‘Skip’ the guide, the rooms, elements and scenes can
still be added and amended from within the application settings menu, although with
slightly different menu layouts. See page 17 onwards.
The application guide will appear on initial start-up of the application and may appear
when updating the app. Once setup, when the application is next started the guide will
not appear and will go straight to the control screen.
The application guide can be accessed thereafter through the settings menu, see
page 34.
Note:
It is recommended only one smart device is used at a time to set up the smart box.
Setup data sent from multiple smart devices may cause the smart box to malfunction.
Once the smart box has been setup and operational, when pairing additional smart
devices to the same smart box all the programmed data will automatically be
uploaded.
www.click-smart.com
Previous Next
8
Installation Check List
Prev Page Next Page
Application Guide - Pairing The Smart Box
Contents
Add Rooms
Add/Assign Elements
Create Scenes
With the CSB040 smart box connected to the router, and the smart device (Phone
or tablet) connected via Wi-Fi to the same router, the app will pair using DHCP
connection. Once the IP address has been issued it will be saved as a static IP.
If the name and IP address is known for the router, the details can be added manually.
To automatically start searching for the smart box, select ‘AUTO’. The IP address of
the smart box will appear when found.
Select the IP address listed to set the address to static and to assign an identication
name. The name will be saved locally to the smart device and not the smart box.
The IP address is set to static to prevent the IP address potentially changing after a
power outage or re-boot of the smart box and router.
Allocate the name and when listed press on the grey circular dot to assign.
www.click-smart.com
Previous Next
9
The grey circular dot
changes to blue, this
conrms the pairing
with the smart box and
the smart device is now
connected.
Up to 6 smart boxes can
be assigned.
Select ‘Next’ to start
entering rooms, elements
and scenes.
Installation Check List
Prev Page Next Page
Application Guide - Adding ‘Rooms’
Contents
Pairing The Smart Box
Add/Assign Elements
Create Scenes
With ‘Rooms’ home screen shown, the list of room (location) names for the complete
installation can be added.
Select ‘ADD ROOM’ to enable the list of rooms on the installation sheet to be entered.
1. Select ‘Name of room’ and the on screen keyboard will appear. Enter the initial
room name, e.g. Lounge.
Android Android
Fig. R1
2. Next select ‘Select Smart Box’ in the room menu. A window will appear with the
list of smart boxes assigned. Select the IP address (Android) or smart box name (iOS)
of the smart box required.
3. Finally select the ‘Icon’ in the menu. Select from either the list of icons (Android) or
glide the icons left or right with selected icon in blue (iOS).
The nal menu will list all selections made.
Android
Press ‘Save’ to conrm the
room name and setting.
The names will be saved
on to the smart box.
The screen will go back to
the ‘Rooms’ home screen.
(Fig. R1)
Add further rooms /
locations (up to 40) or
select ‘NEXT’ to advance
to adding Elements
(Receivers)
www.click-smart.com
Previous Next
10
Installation Check List
Prev Page Next Page
Contents
Application Guide - Adding & Assigning ‘Elements’
Pairing The Smart Box
Add Rooms
Create Scenes
With ‘Elements’ home screen shown, the elements (receivers and related appliance)
for the complete installation can be added and also assigned to its room (location).
Select ‘ADD ELEMENTS’ to enter the menu and enable the list of elements/receiver
on the installation sheet to be entered.
1. Select ‘Name of element’ on the menu and the on screen keyboard will appear.
Enter the element/receiver appliance name, e.g. Table Lamp Lounge.
Fig. E1
2. Select the smart box IP address or name from the drop down list which appears.
3. Select ‘Enter receiver address’ and type in the address from the installation sheet.
The letters can be entered in lower case.
Note: Ensure the address is correct as in the event an error is made the receiver will
not operate.
Elements continue on
next page
www.click-smart.com
Previous Next
11
Installation Check List
Prev Page Next Page
Contents
Application Guide - Adding & Assigning ‘Elements’ cont’d
Pairing The Smart Box
Add Rooms
Create Scenes
4. With the address entered, select ‘Type of receiver’.
From the drop down menu, select the installed receiver type, e.g. RFDEL-71B.
5. The next menu section is the icon preferred to help identify the appliance when
being controlled.
From the drop down menu (Android) or glide the icons left or right with selected icon
in blue (iOS) select the preferred icon.
Android
6. Finally select the room for where the appliance is located. The list of rooms
previously entered will appear.
With all six elds completed the data can then be saved. The data will be saved on to
the smart box and not the smart device.
Android
On saving, the screen will
go back to the ‘Elements’
home screen, (page 11
Fig. E1).
Add further elements or
select ‘NEXT’ to advance
to adding Scenes.
www.click-smart.com
Previous Next
12
Installation Check List
Scenes - Shutters
Scenes - Dimming
Scenes - Switching
Pairing The Smart Box
Prev Page Next Page
Contents
Application Guide - Creating Scenes
Creating scenes enables multiple elements (receivers) to be added with each element
assigned its own function for that scene. With a single press all the set commands can
be carried out.
Add Rooms
Add/Assign Elements
Example. The scene ‘Reading’ could be set up so the main lounge lights are dimmed
to 10% whilst the table lamp switches ‘OFF’ and the oor lamp (preferred for reading)
is switched ‘ON’.
If necessary, ‘Scenes’ can be created or edited later if preferred.
To create scenes select ‘ADD SCENES’ to enter the Scenes menu or complete to
nish the application guide setup.
1. Assign the scene a name.
2. Select the smart box to be assigned. Choose the elements and function settings.
www.click-smart.com
Fig. S1
3. Choose from the list of receivers already added.
As each receiver/appliance is selected the function to be
carried out will need to be assigned.
The following pages will explain about each setting for:
• Switching receivers
• Dimming receivers
• Shutter receivers
Previous Next
13
Installation Check List
Scenes - Shutters
Pairing The Smart Box
Scenes - Dimming
Add Rooms
Add/Assign Elements
Create Scenes
Prev Page Next Page
Contents
Application Guide - Creating Scenes - continued
3a. Switching receiver selected.
Android - The initial screen starts up with time delay settings (see below) with
standard switching ‘On’ and ‘Off’.
iOS - The initial screen starts up with the respective element selected icon, ‘On’ &
‘Off’ plus ‘More’ in the top right hand corner. By selecting ‘More’ the screen moves to
the time delay settings.
Android iOS - Screen 1 iOS - Screen 2
To assign the setting:
A. Standard switching (On or Off).
Select the required option which will change the background to blue. Select back to
save the setting and return back to the scene listing.
B. Time delay setting (1 hour maximum):
The three settings relate to (hours, minutes & seconds).
Delayed off (turns off after the set time has elapsed).
Delayed on (turns on after the set time has elapsed).
Add the required time for either delay option and press the ‘Set’ (Android) or
‘delayed’ (iOS) button to assign.
Select back to save the setting and return back to the scene listing.
The receiver / appliance setting on the scene listing will
change.
A blue tick replaces the ‘X’, with additional
(Android).
icon
www.click-smart.com
Select the blue tick to remove the selection from the
scene or icon to change the receiver setting.
Previous Next
14
Installation Check List
Scenes - Shutters
Pairing The Smart Box
Scenes - Switching
Prev Page Next Page
Application Guide - Creating Scenes - continued
3b. Dimming receiver selected.
A. The initial screen starts up with the dimming arc.
Contents
Add Rooms
Add/Assign Elements
Create Scenes
Simply press or press and slide around the arc to set the required lighting level. Select
back to save the setting and return back to the scene listing.
B. In the top right corner, by selecting ‘Next’ (Android) or ‘More’ (iOS) the screen
progresses to time settings for dimming up to maximum or down to minimum.
The settings relate to minutes & seconds (59 minutes, 59 seconds maximum).
Decrease - Time to dim down to off (sunset)
Increase - Time to dim up to 100% (sunrise)
Add the required time for either option and press the ‘decrease’ or ‘increase’ button
so highlighted in blue to assign.
Select back to save the setting and return back to the
scene listing.
The receiver / appliance setting on the scene listing will
change.
A blue tick replaces the ‘X’, with additional
(Android).
Select the blue tick to remove the selection from the
scene or icon to change the receiver setting.
icon
www.click-smart.com
Previous Next
15
Installation Check List
Scenes - Dimming
Scenes - Switching
Pairing The Smart Box
Prev Page Next Page
Contents
Application Guide - Creating Scenes - continued
3c. Shutter receiver selected.
The initial screen starts up with the blind icon and receiver / appliance identication.
Add Rooms
Add/Assign Elements
Create Scenes
The initial setting allows you to set ‘Up’ (open) or ‘Down’ (closed).
Select ‘Next’ (Android) or ‘More’ (iOS) to progress with adding a specic time for up
or down (open or close).
The scene time set is independent to the time which is set up within the manual
control menu which time schedules also link too.
www.click-smart.com
Select back to save the setting and return back to the
scene listing.
The receiver / appliance setting on the scene listing will
change.
A blue tick replaces the ‘X’, with additional
(Android).
Select the blue tick to remove the selection from the
scene or icon to change the receiver setting.
Previous Next
16
icon
Control Menu
Installation Check List
Advanced Settings
Time Schedules
Prev Page Next Page
Contents
Application ‘Settings’ Menus
With the application guide completed, any additions or amendments to rooms,
elements and scenes can be made by accessing the ‘Settings’ menu.
The Settings menu is accessed by pressing the three vertical dots in the top right
hand corner of the app.
Pressing ‘help’ opens this PDF manual.
‘Exit’ offers the facility to exit the application (Android only).
The ‘Settings’ menu also enables access to the following features:
• Time Schedules - Automate receivers to switch, dim or open and close
• Advanced Settings - Go to page 34 for more information
www.click-smart.com
Previous Next
17
Installation Check List
Prev Page Next Page
Contents
Settings Menu - Smart Box Settings
With the smart box paired during initial the application guide setup, the paired smart
box will be listed including its IP address and blue circle conrming its pairing.
The ‘Smart Box Settings’ screen offers the following features:
• Search - Enables the app to search for additional smart boxes connected to the
same WiFi network with the facility to add and pair them.
• Download data - Once the smart box is paired, any data input can be downloaded.
• Add - Manually add a new smart box. The IP address will be required.
• Smart box pairing data / rename - Press the paired smart box listed to display the
smart box settings. Offers the facility to rename the smart box.
• Delete - Press and hold (Android) or slide to the left (iOS) to delete the paired
smart box. All associated data will automatically be removed on deletion.
• Search
Will start searching for further
smart boxes on the same
WiFi network.
The original smart box setup
will appear as already saved.
Up to 6 smart boxes can be
linked to one application.
During the setup of a new
smart box, the IP address
will be set to static to prevent
the IP address potentially
changing in the event of a
power outage occurring.
• Download data
If a new smart box is
added or the original data
is updated, the latest data
can be downloaded from the
smart box using this facility.
www.click-smart.com
Previous Next
18
‘Wait please’ appears on both
Android and iOS versions.
Installation Check List
Prev Page Next Page
Settings Menu - Smart Box Settings
• Add
If you know the IP address of the smart box it can be
added manually along with its name.
Contents
Android iOS
• Smart box pairing data
Displays:
• Smart box name
• IP address
• Port number
• MAC address
• Firmware version of the
smart box
The box name may be
amended.
We recommend the IP
address or port number is not
altered as the smart box will
loose its pairing.
• Delete
www.click-smart.com
Previous Next
19
Press and hold (Android)
or slide to the left (iOS) to
delete the paired smart box.
All associated data will
automatically be removed on
deletion.
Installation Check List
Add Rooms
Add Schedules
Prev Page Next Page
Contents
Settings Menu - Elements
Accessing ‘Elements’ from within the application enables the initial information
entered to be amended or deleted or new elements/receivers to be added.
From within the same menu time schedules can also be added. See page 26 for
more information on adding time schedules.
To delete an element, press and hold (Android) or slide to the left (iOS) to delete the
element and its settings. All associated data will be removed, e.g. from within scenes.
Example of previously installed elements and amendment screen.
Android iOS
Control Menu
New elements can also be added.
With the receiver data recorded on the original installation sheet add each piece of
information, selecting the respective smart box and icon to help identify the light or
appliance being controlled.
Android iOS
Press ‘Save’ to add the
receiver details to the list of
elements.
Note:
www.click-smart.com
Previous Next
20
The new element(s) added
will require assigning to the
room(s) / location(s).
See “Rooms” on page 21
Installation Check List
Add Elements
Add Schedules
Prev Page Next Page
Contents
Settings Menu - Rooms
Accessing ‘Rooms’ from within the application enables the initial information entered
to be amended or deleted or new rooms/locations to be added.
Select the room and the list of elements will appear. Where elements were previously
assigned to the room will have a tick.
Select edit to access the facility to change the room name or its icon.
To delete a room, press and hold (Android) or slide to the left (iOS). All associated
data will be removed, e.g. from within scenes. Elements remain unaffected.
iOS
Control Menu
New rooms can also be added and elements assigned.
Add the room name, smart box and select the icon, (drop down list (Android) or slide
bar (iOS)).
Press ‘Save’ to add the receiver details to the list of elements.
iOS
The required elements will
then need to be assigned
to the preferred room /
location.
www.click-smart.com
Previous Next
21
Installation Check List
Assign Switching
Assign Dimming
Assign Shutter
Prev Page Next Page
Contents
Settings Menu - Scenes
Accessing ‘Scenes’ from within the application enables the initial information entered
to be amended or deleted or new scenes can be created.
Select the scene and the list of elements will appear. Where elements were previously
assigned to the scene will have a tick.
Control Menu
To edit an element press on the element to select (iOS) or
function. Change the function and press ‘< back’ to return to the scene’s element list
and press ‘Save’ to save the changes made.
To remove an element from a scene, press and hold (Android) or slide to the left
(iOS). The element itself remains unaffected.
(Android) to access the
Android
New scenes can also be added and elements and their required function assigned.
Assign the scene name, smart box and then select elements. As each element is
selected its function can be assigned. Press ‘Add’ to save the scene.
iOS
www.click-smart.com
Previous Next
22
Installation Check List
Assign Dimming
Assign Shutter
Prev Page Next Page
Contents
Settings Menu - Scenes - Switching Receiver Functions
Switching receiver selected.
Android - The initial screen starts up with time delay settings (see below) with
standard switching ‘On’ and ‘Off’.
iOS - The initial screen starts up with the respective element selected icon, ‘On’ &
‘Off’ plus ‘More’ in the top right hand corner. By selecting ‘More’ the screen moves to
the time delay settings (see below).
Control Menu
Android iOS - Screen 1 iOS - Screen 2
To assign the setting:
A. Standard switching (On or Off).
Select the required option which will change the background to blue. Select back to
save the setting and return back to the scene listing.
B. Time delay setting (1 hour maximum):
The three settings relate to (hours, minutes & seconds).
Delayed off (turns off after the set time has elapsed).
Delayed on (turns on after the set time has elapsed).
Add the required time for either delay option and press the ‘Set’ (Android) or
‘delayed’ (iOS) button to assign.
Select back to save the setting and return back to the scene listing.
The receiver / appliance setting on the scene listing will
change.
www.click-smart.com
A blue tick replaces the ‘X’, with additional
(Android).
Select the blue tick to remove the selection from the
scene or press the icon to change the receiver setting.
Previous Next
23
icon
Installation Check List
Assign Switching
Assign Shutter
Prev Page Next Page
Contents
Settings Menu - Scenes - Dimming Receiver Functions
Dimming receiver selected.
A. The initial screen starts up with the dimming arc.
Simply press or press and slide around the arc to set the required lighting level. Select
back to save the setting and return back to the scene listing.
Control Menu
B. In the top right corner, by selecting ‘Next’ (Android) or ‘More’ (iOS) the screen
progresses to time settings for dimming up to maximum or down to minimum.
The settings relate to minutes & seconds (59 minutes, 59 seconds maximum).
Decrease - Time to dim down to off (sunset)
Increase - Time to dim up to 100% (sunrise)
Add the required time for either option and press the ‘decrease’ or ‘increase’ button so
highlighted in blue to assign.
Select back to save the setting and return back to the
scene listing.
The receiver / appliance setting on the scene listing will
change.
www.click-smart.com
A blue tick replaces the ‘X’, with additional
(Android).
Select the blue tick to remove the selection from the
scene or icon to change the receiver setting.
Previous Next
24
icon
Installation Check List
Assign Switching
Assign Dimming
Prev Page Next Page
Contents
Settings Menu - Scenes - Shutter Receiver Functions
3c. Shutter receiver selected.
The initial screen starts up with the blind icon and receiver / appliance identication.
The initial setting allows you to set ‘Up’ (open) or ‘Down’ (closed).
Select ‘Next’ (Android) or ‘More’ (iOS) to progress with adding a specic time for up
or down (open or close).
The scene time set is independent to the time which is set up within the manual
control menu which time schedules also link too.
Control Menu
Select back to save the setting and return back to the
scene listing.
The receiver / appliance setting on the scene listing will
change.
www.click-smart.com
A blue tick replaces the ‘X’, with additional
(Android).
Select the blue tick to remove the selection from the
scene or icon to change the receiver setting.
Previous Next
25
icon
Installation Check List
Select Elements
Assign Day & Times
Amend & Copy
Activate Schedules
Prev Page Next Page
Contents
Settings Menu - Elements - Schedules
Creating and activating time schedules enables selected elements to be automated
which in turn can provide additional security, e.g. simulated occupancy.
The schedules programmed are stored by the smart box so once setup and activated
the smart phone or tablet does not need to be connected to the router / Wi-Fi .
Up to 4 time schedules can be setup per day with a 7 day cycle.
Daily schedule:
Switching: 4 x ON and 4 x OFF
• Dimming: 4 x ON (10% to 100%) and 4 x OFF
• Shutter: 4 x UP and 4 x DOWN
Schedules setup for one day can easily be copied to other days of the week.
Up to 10 elements with the same function can be assigned to the same schedule.
You cannot assign a mixture of switching, dimming and shutter elements to the same
schedule, they must be setup independently.
Note:
If more than one smart box is assigned through the same application, only
elements with the same function and on the same smart box can be controlled
together (up to a maximum of 10).
Once setup, the elements assigned to time schedules can easily be enabled /
disabled to ‘AUTO’ mode. See “Activate” on page 33.
Note:
Any elements set to ‘AUTO’ can still be over-ridden by locally controlled smart
switches etc.
The schedules if still in ‘AUTO’ mode will then over-ride the present status when
the next time set has elapsed.
Schedules can easily be removed. Simply press and hold (Android) or slide to the left
(iOS). All the assigned elements remain unaffected.
www.click-smart.com
Previous Next
26
Installation Check List
Schedules
Assign Day & Times
Amend & Copy
Activate Schedules
Prev Page Next Page
Contents
Schedules - Create - Select Elements & Functions
To create time schedules simply add the schedule name, select the smart box and the
required elements (must be of the same function, e.g. all switching receivers).
iOS
iOS
iOSiOS
With the elements selected the ‘Functions available’
tab lists the functions that are available for the type of
receiver selected (not used to assign to schedule).
The actual function required is assigned when adding
the schedule information.
Switching elements / receivers:
• RFSC-61, RFSA-61B, RFSAI-61B, RFSA-61M,
RFSA-62B and RFSA-66M
• Functions: Select ON for times assigned and will
automatically be off between schedules.
• Selecting ‘OFF’ will not display on the time bar.
Shutter elements / receivers:
• RFJA-12B/230V and RFJA-12B/24V
• Functions: Select UP (open) for times assigned and
will automatically be down between schedules.
• Selecting ‘DOWN’ will not display on the time bar.
iOS
www.click-smart.com
For dimming receivers see the following page.
Previous Next
27
Installation Check List
Schedules
Assign Day & Times
Amend & Copy
Activate Schedules
Prev Page Next Page
Contents
Schedules - Create - Select Elements & Functions - cont’d
Dimming elements / receivers:
RFDA-71B, RFDEL-71B and RFDAC-71B
Functions available: Four dimming levels (default 20, 50, 70 & 100%) allowing
the desired level to be set for a specied time period.
In between the assigned time schedules the light source will be off.
Selecting ‘DOWN’ will not display on the time bar.
Each of the four levels can be adjusted by pressing the level to be amended.
The control screen opens and the level can be adjusted in 10% increments.
Press the ‘back’ (Android) or ‘X’ (iOS) to save and return to the function screen.
iOS
Once the elements have been selected, select ‘Next’ to assign the days, times and
the element(s) function (dimmed level).
iOSiOS
www.click-smart.com
Previous Next
28
Installation Check List
Schedules
Amend & Copy
Activate Schedules
Select Elements
Prev Page Next Page
Contents
Schedules - Create - Assign Day, Times & Function
Weekly overview screen
Select ‘New’ to open the input screen.
Day, time and function input screen
Dependant on the element type will depend on the input screen information displayed.
Enter the day, time from and time to then select the ‘ON’, ‘UP’ or dimmed level to
undertake during the times set.
To select the function on Android devices, access the drop down menu.
iOS
iOSiOS
www.click-smart.com
Switching DimmingShutter
Previous Next
29
Installation Check List
Select Elements
Schedules
Amend & Copy
Activate Schedules
Prev Page Next Page
Contents
Schedules - Create - Assign Day, Times & Function cont’d
Day, time and function input screen (switching elements)
With the day, times and ‘ON’ function added, pressing save will then display the weekly
overview screen with the time selection displaying on the time bar.
Press ‘save’ on the time bar screen will then save all set times and functions.
iOS
Switching
Day, time and function input screen (shutter elements)
With the day, times and ‘UP’ function added, pressing save will then display the weekly
overview screen with the time selection displaying on the time bar.
Press ‘save’ on the time bar screen will then save all set times and functions.
www.click-smart.com
Shutter
Previous Next
30
Installation Check List
Select Elements
Schedules
Amend & Copy
Activate Schedules
Prev Page Next Page
Contents
Schedules - Create - Assign Day, Times & Function cont’d
Day, time and function input screen (dimming elements)
With the day, times and dimmed levels added, pressing save will then display the
weekly overview screen with the time selection displaying on the time bar.
Press ‘save’ on the time bar screen will then save all set times and functions.
iOS
iOS
Dimming
When selecting the dimming level, each of the four percentages displays a different
colour on the time bar:
0% - Nothing displayed
Level 1 - (20% default): Green
Level 2 - (50% default): Orange
Level 3 - (70% default): Red
Level 4 - (100% default): Blue
iOS
iOS
Android
www.click-smart.com
Dimming
Previous Next
31
Installation Check List
Select Elements
Schedules
Activate Schedules
Assign Day & Times
Prev Page Next Page
Contents
Schedules - Amend, Remove & Copy
Amend & remove times set
With the weekly overview screen open, press the coloured time bar which shows the
‘from’ and ‘to’ times. Slide up or down to adjust each time or press and ‘hold’ the
opened time bar (g. 1) to open the schedule setting (g. 2).
Press ‘Delete’ (Android) or ‘Erase’ (iOS) to remove these times from the full schedule.
Fig. 1 Fig. 2
Copy times
With the weekly overview screen open, select the coloured time bar to copy.
Select the days to copy ‘too’ which will change to white. All times for that day will be
copied across.
Press ‘save’ to conrm the copy changes and then save on the weekly overview to
save the changes to the smart box.
www.click-smart.com
Previous Next
32
Installation Check List
Schedules
Prev Page Next Page
Contents
Schedules - Activate
Once time schedules have been setup, for them to operate automatically the ‘AUTO’
setting within each element must be enabled.
To engage the ‘AUTO’ setting the element control screen must be accessed.
Exit the settings menu and enter the room and element to enable.
Control Menu
Press the ‘AUTO’ button and the button will turn blue to conrm activation.
Press ‘< back’ and the element will have a small time icon
the element has been set to run automatically.
To disable the automatic control, simply press the ‘AUTO’ button within the element’s
control menu.
illustrated to conrm
www.click-smart.com
Previous Next
33
Installation Check List
Settings Menu
Prev Page Next Page
Advanced Settings
Advanced settings provides access to the following features:
Contents
Control Menu
Standard Design White Design
• Receive rmware updates notication
Notications will be sent with regards updates for the smart box.
• Turn on sync time in Smart Box
In the event no broadband is available, enables synchronisation of the smart
box time to the initial smart phone or tablet (UK time).
If not connected to the broadband and not synchronised to the smart device, the
time set on the smart box will start at 12.00 (midnight) with the date 01.01.16.
• Switch to white design
Changes the background to white with dark grey and purple text / icons.
• Download latest rmware
Download the latest smart box rmware update (CSb **.bin le).
• Update Smart Box
Update the smart box with the latest rmware.
• Load/recover Smart Box settings
Upload the saved settings / data to the smart box (**.bin le).
www.click-smart.com
• Save/back up Smart Box settings
Save the smart box settings / data to the smart device (**.bin le).
• Guide
Start the application easy setup guide.
• ‘Version’ refers to the application software version presently running.
CSa (Android), CSi (iOS).
Previous Next
34
Installation Check List
Control Switching
Control Dimming
Control Shutter
Control Scene
Prev Page Next Page
Contents
Application Control
The control menus enables rooms, scenes and elements to be easily selected with
the required element or scene then controlled.
The initial screen displays the rooms with icons, swipe left and the scenes (if setup)
are then displayed.
The Click Smart receivers and smart box use bi-directional signals which allows the
icons set up for each element to display its current status.
The current status will be displayed on all smart devices connected to the smart box.
In the event the screen does not refresh automatically, the status of the element(s)
can be refreshed manually by swiping down the screen.
www.click-smart.com
Previous Next
35
Installation Check List
Control
Control Dimming
Control Shutter
Control Scene
Prev Page Next Page
Application Control - Switching
The current status icon of the switching receiver is displayed.
Contents
Icon pale grey outline.
Receiver element is
either not powered, out
of range or address
input is incorrect.
With all the Click Smart switching receivers having multifunctional settings, one of the
following settings can be selected:
• ON or OFF
• ‘Auto’ can only be enabled once time schedules have been setup which includes
this element/receiver.
• *Time delay OFF - Turns off after the time set has elapsed
• *Time delay ON - Turns on after the time set has elapsed
*When instigating either time delay function, the element’s icon will also display the
‘clock icon’ in the background during the time elapse.
iOS
Icon white outline.
Receiver element is
within range with the
output ‘Off’.
Icon with blue inll.
Receiver element is
within range with the
output ‘On’.
www.click-smart.com
Previous Next
36
Installation Check List
Control
Control Shutter
Control Scene
Control Switching
Prev Page Next Page
Application Control - Dimming
The current status icon of the dimming receiver is displayed.
Contents
Icon blue outline.
Receiver element is
either not powered, out of
range or address input is
incorrect.
With all the Click Smart dimming receivers having multifunctional settings, one of the
following settings can be selected:
• Control to and from ON (100%) to OFF (0%) in 10% increments
• ‘Auto’ can only be enabled once time schedules have been setup which includes
this element/receiver.
• Decrease - Dims down to off over the set time
• Increase - Dims up to 100% over the set time
When instigating either timed function, the element’s icon will display the icon with a
blue outline during the time elapse.
Icon with blue inll.
Receiver element is
within range with the
output ‘Off’.
Icon with blue inll and
white arc displayed.
Receiver element is within
range with the output ‘On’
or at dimmed level.
www.click-smart.com
Previous Next
37
Installation Check List
Control
Control Dimming
Control Scene
Control Switching
Prev Page Next Page
Application Control - Shutter
The current status icon of the shutter receiver is displayed.
Contents
Icon pale grey outline.
Receiver element is
either not powered, out of
range or address input is
incorrect.
The Click Smart shutter receiver features UP (open) and DOWN (close) options for
control with a ‘STOP’ button to assist where required.
• ‘Auto’ can only be enabled once time schedules have been setup which includes
this element/receiver.
• There is only one time setting which covers both UP and DOWN, press ‘Set’ to
save the time. We recommend setting the time for which creates the longest time
event. The inbuilt limit switch in the blind/curtain motor will prevent the motor and
blind from over-running.
• The visual on screen blind will animate to display its current status.
Icon with white outline and
blind down.
Receiver element is within
range with the shutter in
the closed position.
Icon with blue inll and
blind up.
Receiver element is within
range with the shutter in
the open position.
www.click-smart.com
Previous Next
38
Installation Check List
Control
Control Dimming
Control Shutter
Control Switching
Prev Page Next Page
Contents
Application Control - Scenes
Prior to activating any scenes we recommend all individual elements are working
and their respective icons are showing the status change during control with minimal
delay. This conrms the elements/receivers are all within range.
To instigate a scene simply press the required icon. The icon lines will turn blue briey
during the signal transmission.
www.click-smart.com
Previous Next
39
ContentsPrev Page Next Page
Error Messages - Setup
During the setup and operation of the smart box and application, in the event of input
or signal issues arising error messages may appear.
With regards the setup of the smart box and pairing to the application, the most
common issues and corrective actions required are:
‘Searching for smart box’
Continuously searching
• Ensure the smart device Wi-Fi connection is to the same router as connected to
the smart box.
‘Failed to add element’
Can occur when setting up elements/receivers.
• Ensure the receiver is correctly wired and powered up.
• Check the receiver address has been recorded correctly and entered correctly in
to the application.
‘Failed to connect to element’
Can occur when setting up elements/receivers.
• The address trying to input may be duplicated. Check the elements and addresses
already entered.
‘This device in not assigned to any time schedule’
Occurs if the ‘Auto’ button is pressed without the element assigned to a schedule.
• A time schedule has not been setup for this element. Enter new schedule or
assign to previously entered schedule.
If setup issues persist please contact our technical support team 01827 63454.
www.click-smart.com
Previous Next
40
ContentsPrev Page Next Page
Error Messages - Control
During the use of the application to control the smart box and elements, in the event
of issues arising error messages may appear.
The most common issues and corrective actions required are:
‘Failed to connect to element’
• If its the rst time the element is controlled check the recorded and installed
receiver address are correct.
• The element may not be powered, check supply and wiring.
• The element may be outside the smart box signal range. This may be caused
by new furniture (e.g. mirror) between the smart box and receiver. Try moving
the smart box a small distance to bypass the new furniture or install a repeater
(RFRP-20/B) which will assist.
‘Cannot connect with smart box’
• Check the smart box and router are powered and connected together.
• Check the smart phone or tablet is connected to the same Wi-Fi network as the
smart box.
• Ensure the application smart box setup is connected to the required smart box and
the circle icon is coloured blue.
Visual - Element icon is not changing status on the application
• Can occur if the signal between the element and smart box is weak.
• Check that new furniture has not be moved to impair the signal between the
element and smart box.
• May need to install a repeater (RFRP-20/B).
• On the element being controlled, swipe down the application screen to refresh the
icon’s status.
If control issues persist please contact our technical support team 01827 63454.
www.click-smart.com
Previous Next
41
Prev Page Contents
United Kingdom Southern Ireland
Scolmore International Ltd
Scolmore Park, Landsberg
Lichfield Road Industrial Estate
Tamworth, Staordshire
B79 7XB
Web: click-smart.com
Tel: +44 (0) 1827 63454
Fax: +44 (0) 1827 63362
Email: sales@scolmore.com
Errors and Ommissions excluded. Specication is subject to change without notice.
18 Corrig Road
Sandyford Industrial Estate
Dublin
Ireland
D18 WV79
Web: clicklitehouse.ie
Tel: +353 (1) 2811 122
Fax: +353 (1) 2811 224
Email: sales@clicklitehouse.ie
(Rev1.1)
Loading...