How it Works
S.Coifman
Loading...
Movement Caliber 1069
Instruction Manual
125 pgs9.02 Mb0

S.Coifman Movement Caliber 1069, Movement Caliber 763, Movement Caliber2330, Movement Caliber 130 Instruction Manual

Download
Instruction Manual
2 3
PRESENTATION
Movement Caliber : 1069
Movement Caliber
1069
Minute Hand
Hour Hand
Second Hand
Control Buttons
Crown Positions:
1. Normal position
2. Setting of hour, minute
1 2
4 5
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 1069
1.1
1.2 1.3
6 7
Movement Caliber
2330 / 130 & 763
PRESENTATION
Movement Caliber : 2330
/
130 & 763
Minute Hand
Hour Hand
Second Hand
Date
Control Buttons
Crown Positions:
1. Normal position
2. Quick correction of date
3. Setting of hour, minute, date
1 2 3
8 9
Setting the Time
1.1 Pull the crown to position 3.
1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 2330
/
130 & 763
1.1
1.2 1.3
10 11
Quick Correction of Date
3.1 Set the crown to position 2.
3.2 Turn the crown clockwise step-by-step to the desired date.
3.3 Push the crown back to position 1.
!! Attention !!
Please Do Not set between 21:00 and 00:30.
SETTINGS
Movement Caliber : 2330
/
130 & 763
2.1
2.2 2.3
12 13
Movement Caliber
3540.D
PRESENTATION
INFO
Movement Caliber : 3540.D
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour, minute, day, date and second time zone / 24-hour
Minute Hand
Center Stop-Second
1/10 Second Counter
(Hour counter after 30 minutes)
Hour Hand
Minute Counter
Second Hand
Date
Push Button A
Push Button B
Battery: 384
(diametaer 7.9mm x 3.6mm / SR 41 Accuracy: +20 / -10 seconds per monthSW)
Control Buttons
1 2 3
14 15
Setting the Time
➊
Pull out the crown to position 3
(the watch stops)
.*
➋
Turn the crown until you reach the correct time 8:45.
➌
Push the crown back into position 1.*
SETTINGS
Movement Caliber : 3540.D
1.1 1.2
Please note
* In order to set the time to the exact second,➊ must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set,
➌
must be
pushed back into position 1 at the exact second.
➊ ➌
➋
16 17
Setting the Date
(Quick Mode)
➊
Pull out the crown to position 2
(the watch continues to run)
.
➋
Turn the crown until the correct date 1 appears.
➌
Push the crown back into position 1.
SETTINGS
Movement Caliber : 3540.D
Please note:
The date can be changed during the date changing phase between 8:30 PM and 12:00 PM; please note that the date must be set to the date of the following day as in this case, the automatic date changing does not occur at midnight.
2.1 2.2
➊ ➌
➋
18 19
Setting the Date / Time
Example: – Date / time on the watch: 17 / 1:25 AM – Present date / time: 4 / 8:30 PM
➊
Pull out the crown to position 2 (the watch continues to run).
➋
Turn the crown until yesterday's date appears 3 .
➌
Pull out the crown to position 3 (the watch stops).*
➍
Turn the crown until the correct date 4 appears.
➎
Continue to turn the crown until the correct time 8:30 PM appears.**
➏
Push the crown back into position 1.
SETTINGS
Movement Caliber : 3540.D
3.3
3.1
3.4
3.2
➊
➏
➍ ➎
➌
➋
Please note:
* To set your watch to the exact second, please refer to chapter titled “Setting the Time”.
** Please observe the AM / PM clock rhythm.
20 21
FUNCTIONS
Movement Caliber : 3540.D
4.1 4.2
A ➊ ➋
B➌
Chronograph: Basic Function
(Start / Stop / Reset)
Example:
➊
Start: Press push button A.
➋
Stop: To stop the timing, press push button A once more and read the
3 chronograph counters: 4 min / 38 sek / 7/10 sec
➌
Zero positioning: Press push button B.
(The 3 chronograph hands will be reset to their zero position).
22 23
FUNCTIONS
Movement Caliber : 3540.D
5.1 5.2
A ➊➋➌➍
B➎
Chronograph: Accumulated Timing
Example:
➊
Start:
(start timing)
➋
Stop:
(e.g. 15 min 5 sec following ➊)
➌
Restart:
(timing is resumed)
➍
Stop:
(e.g. 13 min 5 sec following ➌)
= 28 min 10 sec
(The accumulated measured time is shown)
*
➎
Reset: The 3 chronograph hands are returned to their zero position.
Please note:
* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)
24 25
FUNCTIONS
Movement Caliber : 3540.D
6.1 6.2
A ➊➍
B ➋➌
B➎
Chronograph: Intermediate or Interval Timing
Example:
➊
Start:
(start timing)
➋
Display interval: e.g. 10 minutes 10 seconds
(timing continues in the background)
➌
Making up the measured time:
(the 3 chronograph hands are quickly advanced to the ongoing measured time)
.
➍
Stop:
(Final time is displayed)
➎
Reset: The 3 chronograph hands are returned to their zero position.
Please note:
* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)
26 27
7.1
7.2 7.3
CALIBRATION
Movement Caliber : 3540.D
Adjusting the Chronograph Hands to Zero Position
Example: One or several chronograph hands are not in their correct zero position and have to be adjusted
(e.g. following a battery change)
.
➊
Pull out the crown to position 3
(all 3 chronograph hands are in their correct or incorrect zero position)
.
➋
Keep push-buttons A and B depressed simultaneously for at least 2
seconds
(the center stop-second rotates by 360°➡corrective mode is activated)
.
Adjusting the center stop second➡Single step A1 x short➡Continuous A long➡Adjusting the next hand B➡Adjusting the 1/10 second counter hand (position 6h)➡Single step A1 x short
➡
Continuous A long➡Adjusting the next hand B➡Adjusting the minute counter (position 9h)
➡
Single step A1 x short➡Continuous A long
➌
Returning the crown to position 1. Termination of the chronograph
hands adjustment can be carried out at any time.
➊
➌
A➋
B➋
28 29
Movement Caliber
5040.D
INFO
Battery: 395
(diameter 9.5mm x 2.6mm / SR 927 SW) Accuracy: +20 / -10 seconds per month
PRESENTATION
Movement Caliber : 5040.D
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour, minute, day, date and second time zone / 24-hour
Minute Hand
Center Stop-Second
Second Hand
Hour Hand
Minute Counter
1/10 Second Counter
(Hour counter after 30 minutes)
Date Window
Push Button A
Quick correction of month
Push Button B
Quick correction of second time zone / 24-hour
Control Buttons
1 2 3
30 31
Setting the Time
➊
Pull out the crown to position 3
(the watch stops)
.*
➋
Turn the crown until you reach the correct time 8:45.
➌
Push the crown back into position 1.*
SETTINGS
Movement Caliber : 5040.D
Please note
* In order to set the time to the exact second,➊ must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set,➌ must be pushed back into position 1 at the exact second.
1.1 1.2
➊ ➌
➋
32 33
2.1 2.2
➊ ➌
➋
Setting the Date
(Quick Mode)
➊
Pull out the crown to position 2
(the watch continues to run)
.
➋
Turn the crown until the correct date 1 appears.
➌
Push the crown back into position 1.
SETTINGS
Movement Caliber : 5040.D
Please note:
The date can be changed during the date changing phase between 8:30 PM and 12:00 PM; please note that the date must be set to the date of the following day as in this case, the automatic date changing does not occur at midnight.
34 35
3.3
3.1
3.4
3.2
➊
➏
➍ ➎
➌
➋
Setting the Date / Time
Example: – Date / time on the watch: 17 / 1:25 AM – Present date / time: 4 / 8:30 PM
➊
Pull out the crown to position 2 (the watch continues to run).
➋
Turn the crown until yesterdays date appears 3 .
➌
Pull out the crown to position 3 (the watch stops).*
➍
Turn the crown until the correct date 4 appears.
➎
Continue to turn the crown until the correct time 8:30 PM appears.**
➏
Push the crown back into position 1.
SETTINGS
Movement Caliber : 5040.D
Please note:
* To set your watch to the exact second, please refer to chapter titled “Setting the Time”.
** Please observe the AM / PM clock rhythm.
36 37
4.1 4.2
A ➊ ➋
B➌
FUNCTIONS
Movement Caliber : 5040.D
Chronograph: Basic Function
(Start / Stop / Reset)
Example:
➊
Start: Press push button A.
➋
Stop: to stop the timing, press push button A once more and read the
3 chronograph counters: 4 min / 38 sek / 7/10 sec
➌
Zero positioning: Press push button B.
(The 3 chronograph hands will be reset to their zero position).
38 39
5.1 5.2
A ➊➋➌➍
B➎
FUNCTIONS
Movement Caliber : 5040.D
Chronograph: Accumulated Timing
Example:
➊
Start:
(start timing)
➋
Stop:
(e.g. 15 min 5 sec following ➊)
➌
Restart:
(timing is resumed)
➍
Stop:
(e.g. 13 min 5 sec following ➌)
= 28 min 10 sec
(The accumulated measured time is shown)
*
➎
Reset: The 3 chronograph hands are returned to their zero position.
Please note:
* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)
40 41
6.1 6.2
A ➊➍
B ➋➌
B➎
FUNCTIONS
Movement Caliber : 5040.D
Chronograph: Intermediate or Interval Timing
Example:
➊
Start:
(start timing)
➋
Display interval: e.g. 10 minutes 10 seconds
(timing continues in the background)
➌
Making up the measured time:
(the 3 chronograph hands are quickly advanced to the ongoing measured time)
.
➍
Stop:
(Final time is displayed)
➎
Reset: The 3 chronograph hands are returned to their zero position.
Please note:
* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)
42 43
7.1
7.2 7.3
CALIBRATION
Movement Caliber : 5040.D
Adjusting the Chronograph Hands to Zero Position
Example: One or several chronograph hands are not in their correct zero position and have to be adjusted
(e.g. following a battery change)
.
➊
Pull out the crown to position 3
(all 3 chronograph hands are in their correct or incorrect zero position)
.
➋
Keep push-buttons A and B depressed simultaneously for at least 2
seconds
(the center stop-second rotates by 360°➡corrective mode is activated)
.
Adjusting the center stop second➡Single step A1 x short➡Continuous A long➡Adjusting the next hand B➡Adjusting the 1/10 second counter hand (position 6h)➡Single step A1 x short
➡
Continuous A long➡Adjusting the next hand B➡Adjusting the minute counter (position 9h)
➡
Single step A1 x short➡Continuous A long
➌
Returning the crown to position 1. Termination of the chronograph
hands adjustment can be carried out at any time.
➊
➌
A➋
B➋
44 45
Movement Caliber
6497
PRESENTATION
Movement Caliber : 6497
Minute Hand
Hour Hand
Second Hand
Control Buttons
Crown Positions:
1. Normal position
2. Setting of hour, minute
1 2
46 47
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 6497
1.1
1.2 1.3
48 49
Movement Caliber
7004.P
PRESENTATION
Movement Caliber : 7004.P
Date
Minute Hand
Day
Hour Hand
Second Hand
Control Buttons
Crown Positions:
1. Normal position
2. Setting of hour, minute, day
INFO
Battery: 381 (diameter 11.6mm x 2.15mm)
1 2 3
50 51
Setting the Time
1.1 Pull the crown to position 3.
1.2 Turn the crown to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 7004.P
1.1
1.2 1.3
52 53
Setting the Date (Quick Mode)
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.
2.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 7004.P
2.1
2.2 2.3
Please note:
An extreme acceleration in setting the date with quick mode can create a false date indication. The synchronization is re-established by setting the date from 01 till 31 (crown position 2).
54 55
Setting the Day (Quick Mode)
3.1 Set the crown to position 3.
3.2 Turn the crown clockwise to advance the day hand until the desired day is set.
3.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 7004.P
3.1
3.2 3.3
Please note:
70% of power is saved when the crown is pulled out.
56 57
Movement Caliber
7750
PRESENTATION
Movement Caliber : 7750
30 Minute Counter
Minute Hand
Hour Hand
Second Hand
60 Second Hand
Day
Date
Control Buttons
Crown Positions:
1. Normal position
2. Setting of hour, minute, day
1 2 3
58 59
Crown 3 Positions
Rapid date and day correction is not possible between 8 p.m. and 2 a.m.
1. Normal running of watch and hand-winding
2. Rapid correction of the date Rapid correction of the day
3. Position for setting the time with stop second and correction of the date at every passing of midnight
SETTINGS
Movement Caliber : 7750
1.1
Please note:
The movement of the wrist winds the watch.
A
B
60 61
FUNCTIONS
Movement Caliber : 7750
Simple Timing Function
Setting crown in position 1
➊
to ➌ order of functions
➊
START
➋
STOP : Read time
- 2 hours, 10 minutes, 8 seconds
➌
Reset to zero
2.1
➊
➋
➌
62 63
FUNCTIONS
Movement Caliber : 7750
ADD Function
Setting crown in position 1
➊
to order of functions
➊
START
➋
STOP Read
➌
RESTART
➍
STOP Read
➎
RESTART
➏
STOP Read
•
•
•
Reset to zero
3.1
➊
➋
➌
➍
➎
➏
••••••
64 65
Movement Caliber
7751
PRESENTATION
Movement Caliber : 7751
Minute Hand
Month Indicator
30 Minute Counter
Day Indicator
Hand Hour
Second Hand
24 Hour Hand
60 Second Hand
Moon Phase Indicator
12 Hour Counter
Date Hand
Crown Positions:
1. Normal position
2. Correction of hour, minute, day, date and second time zone / 24-hour
Push Button B
Split / Reset
Control Buttons
Push Button C
(Option)
Quick correction of day
Push Button A
Quick correction of date.
1 2 3
66 67
Crown 3 Positions
Date correction is not recommended between 10 p.m. and 2 p.m. The moon phase cannot be corrected between 3 a.m. and 4 a.m.
1. Normal running of watch and hand-winding
2. Rapid correction of the date
Rapid correction of the
moon phase
3. Position for setting the time with stop second and correction of the date at every passing of midnight
SETTINGS
Movement Caliber : 7751
1.1
Please note:
The movement of the wrist winds the watch.
A
B
68 69
FUNCTIONS
Movement Caliber : 7751
Simple Timing Function
Setting crown in position 1
➊
to ➌ order of functions
➊
START
➋
STOP : Read time
- 4 hours, 10 minutes, 8 seconds
➌
Reset to zero
2.1
➊
➋
➌
70 71
FUNCTIONS
Movement Caliber : 7751
ADD Function
Setting crown in position 1
➊
to order of functions
➊
START
➋
STOP Read
➌
RESTART
➍
STOP Read
➎
RESTART
➏
STOP Read
•
•
•
Reset to zero
3.1
➊
➋
➌
➍
➎
➏
••••••
72 73
Movement Caliber
8040.N
INFO
Movement Caliber : 8040.N
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour, minute, day, date and second time zone / 24-hour
Minute Hand
Day
Hour Hand
Minute Counter
Center Stop-Second
Second Hand
1/10 Second Counter
(Hour counter after 30 minutes)
Date
Push Button A
Push Button B
Battery: 384
(diametaer 7.9mm x 3.6mm / SR 41 Accuracy: +20 / -10 seconds per monthSW)
Control Buttons
1 2 3
74 75
Setting the Time
➊
Pull out the crown to position 3
(the watch stops)
.*
➋
Turn the crown until you reach the correct time 8:45.
➌
Push the crown back into position 1.*
SETTINGS
Movement Caliber : 8040.N
1.1 1.2
Please note
* In order to set the time to the exact second,➊ must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set,➌ must be pushed back into position 1 at the exact second.
➊ ➌
➋
76 77
Setting the Date
(Quick Mode)
➊
Pull out the crown to position 2
(the watch continues to run)
.
➋
Turn the crown counter clockwise until the correct date 1 appears.
➌
Push the crown back into position 1.
Movement Caliber : 8040.N
Please note:
During the date changing phase between 9 PM and 12 PM; the date must be set to the date of the following day. An extreme acceleration in setting the date with quick mode can create a false date indication. The synchronization is re-established by setting the date from 01 till 31 (crown in position 2).
2.1 2.2
➊ ➌
➋
SETTINGS
Setting the Date / Weekday and Time
Example:
– Date / time on the watch: 17 / 1:25 AM / MON – Present date / time: 23 / 20:30 PM / SAT
➊
Pull out the crown to position 3 (the watch stops).
➋
Turn the crown until yesterday’s weekday FRI appear.
➌
Pull out the crown to position 3.
➍
Turn the crown backwards until yesterday’s date appears 22 .
➎
Pull out the crown to position 3 (the watch stops).*
➏
Turn the crown until the correct date 23 and weekday SAT appears.
➐
Continue to turn the crown until the correct time 8:35 PM appears.**
➑
Push the crown back into position 1.
SETTINGS
Movement Caliber : 8040.N
Please note:
* To set your watch to the exact second, please refer to chapter titled “Setting The Time”. ** Please observe the AM / PM clock rhythm.
78
3.3
3.1
3.4
3.2
➊
➏
➍ ➎
➌
➋
79
80 81
4.1 4.2
A ➊ ➋
B➌
FUNCTIONS
Movement Caliber : 8040.N
Chronograph: Basic Function
(Start / Stop / Reset)
Example:
➊
Start: Press push button A.
➋
Stop: To stop the timing, press push button A once more and read the
3 chronograph counters: 4 min / 38 sek / 7/10 sec
➌
Zero positioning: Press push button B.
(The 3 chronograph hands will be reset to their zero position).
82 83
5.1 5.2
A ➊➋➌➍
B➎
FUNCTIONS
Movement Caliber : 8040.N
Chronograph: Accumulated Timing
Example:
➊
Start:
(start timing)
➋
Stop:
(e.g. 15 min 5 sec following ➊)
➌
Restart:
(timing is resumed)
➍
Stop:
(e.g. 13 min 5 sec following ➌)
= 28 min 10 sec
(The accumulated measured time is shown)
*
➎
Reset: The 3 chronograph hands are returned to their zero position.
Please note:
* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)
84 85
6.1 6.2
A ➊➍
B ➋➌
B➎
FUNCTIONS
Movement Caliber : 8040.N
Chronograph: Intermediate or Interval Timing
Example:
➊
Start:
(start timing)
➋
Display interval: e.g. 10 minutes 10 seconds
(timing continues in the background)
➌
Making up the measured time:
(the 3 chronograph hands are quickly advanced to the ongoing measured time)
.
➍
Stop:
(Final time is displayed)
➎
Reset: The 3 chronograph hands are returned to their zero position.
Please note:
* Following ➍, the accumulation of the timing can be continued by pressing push button A (Restart / Stop, Restart / Stop, …)
86 87
7.1
7.2 7.3
➊
➌
A➋
B➋
CALIBRATION
Movement Caliber : 8040.N
Adjusting the Chronograph Hands to Zero Position
Example: One or several chronograph hands are not in their correct zero position and have to be adjusted
(e.g. following a battery change)
.
➊
Pull out the crown to position 3
(all 3 chronograph hands are in their correct or incorrect zero position)
.
➋
Keep push-buttons A and B depressed simultaneously for at least 2
seconds
(the center stop-second rotates by 360°➡corrective mode is activated)
.
Adjusting the center stop second➡Single step A1 x short➡Continuous A long➡Adjusting the next hand B➡Adjusting the 1/10 second counter hand (position 6h)➡Single step A1 x short
➡
Continuous A long➡Adjusting the next hand B➡Adjusting the minute counter (position 9h)
➡
Single step A1 x short➡Continuous A long
➌
Returning the crown to position 1. Termination of the chronograph
hands adjustment
(can be carried out at any time)
.
88 89
Movement Caliber
8171 / 204
PRESENTATION
INFO
Movement Caliber : 8171 / 204
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour, minute, day, date and second time zone / 24-hour
Second Hand
Minute Hand
30 Minute Totalizer
Hour Hand
Chronogaph Hand 1/5 Second
Moon Phase Indicator
Date Window
Push Button A
Start / Stop
Push Button B
Split / Reset
Battery: 395-SR 927W
Service Life Battery : Without chrono = 57 months, with chrono 1H/D = 41 months 031213 1 IM - B
Control Buttons
1 2 3
90 91
2.11.1 2.21.2
Set SetReset Reset
SETTINGS
Movement Caliber : 8171 / 204
Setting the Time
To Correct the Date
Caution: Never correct date between 9pm and 0:30am.
92 93
SETTINGS
Movement Caliber : 8171 / 204
To Correct the Moonphase
Set the date according to the last full moon. Afterwards adapt like steps 3.1 and 3.2.
3.1 3.2
94 95
FUNCTIONS
Movement Caliber : 8171 / 204
After 2 hours of continuous running, the chrono stops and resets automatically to save the battery.
4.1
4.2
4.3
A
A
B
96 97
FUNCTIONS
Movement Caliber : 8171 / 204
Measuring Split Times
5.1 5.2
Start Split
Restart
Stop Reset
5.3
5.4
5.5
A
B
B
A
B
98 99
CALIBRATION
Movement Caliber : 8171 / 204
After Battery Exchange or Mishandling Only
To reset chronograph, minute and second chronograph.
6.36.1 6.46.2
Enter Exit
Mintue Second
B
B
A
B
100 101
PRESENTATION
Movement Caliber : 8172 / 220
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour, minute, day, date and second time zone / 24-hour
Second Hand
Minute Hand
Hour Hand
30 Minute Counter
Chronograph Hand 1/5 Second
Day
Push Button A
Start / Stop
Push Button B
Split / Reset
Control Buttons
1 2 3
Movement Caliber
8172 / 220
INFO
Battery: 395-SR 57
Service Life Battery: Without chrono = 57 months, with chrono 1H/D = 41 month 0312141 IM - B
102 103
2.1 2.2
Set Reset
To Correct the Day
1.1 1.2
Set Reset
SETTINGS
Movement Caliber : 8172 / 220
Setting the Time
104 105
3.1 3.2
SETTINGS
Movement Caliber : 8172 / 220
Setting the Date
Caution: Never correct date between 9pm and 0:30am.
106 107
4.1
4.2
4.3
A
A
B
FUNCTIONS
Movement Caliber : 8172 / 220
After 2 hours of continuous running, the chrono stops and resets automatically to save the battery.
108 109
Restart
Stop Reset
5.3
5.4
5.5
B
A
B
FUNCTIONS
Movement Caliber : 8172 / 220
Measuring Split Times
5.1 5.2
Start Split
A
B
110 111
6.3 6.4
Exit
Second
A
B
CALIBRATION
Movement Caliber : 8172 / 220
After Battery Exchange or Mishandling Only
To reset chronograph, minute and second chronograph.
6.1 6.2
Enter
Mintue
B
B
112 113
PRESENTATION
Movement Caliber : 9231 / 1890
Crown Positions:
1. Normal position
2. Setting of hour, minute, day, date
Minute Hand
Hour Hand
Day
Second Hand
Date
Push Button A
Control Buttons
1 2
Movement Caliber
9231 / 1890
INFO
Battery: 371 – SR920SW
114 115
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9231 / 1890
1.1
1.2 1.3
116 117
Setting the Date
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.
2.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9231 / 1890
2.1
2.2 2.3
118 119
Quick Correction of Date
3.1 Set the crown to position 1.
3.2 Press A step-by-step to advance the date until the desired date is set.
!! Attention !!
The date advances at 00:00 midnight, not 12:00 noon.
SETTINGS
Movement Caliber : 9231 / 1890
3.1 3.2
120 121
Setting the Day
4.1 Pull the crown to position 2.
4.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
4.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9231 / 1890
4.1
4.2 4.3
122 123
PRESENTATION
Movement Caliber : 9231 / 1900
Crown Positions:
1. Normal position
2. Correction of hour, minute, day, date, Sun and Moon
Minute Hand
Hour Hand
Day
Second Hand
Sun and Moon
Date
Push Button A
Control Buttons
1 2
Movement Caliber
9231 / 1900
INFO
Battery: 371 – SR920SW
124 125
Setting the Time, Sun and Moon
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands and Sun and Moon to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9231 / 1900
1.1
1.2 1.3
126 127
Setting the Date
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.
2.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9231 / 1900
2.1
2.2 2.3
128 129
Quick Correction of Date
3.1 Set the crown to position 1.
3.2 Press A step-by-step to advance the date until the desired date is set.
!! Attention !!
The date advances at 00:00 midnight, not 12:00 noon.
SETTINGS
Movement Caliber : 9231 / 1900
3.1 3.2
130 131
Setting the Day
4.1 Pull the crown to position 2.
4.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
4.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9231 / 1900
4.1
4.2 4.3
132 133
PRESENTATION
Movement Caliber : 9232 / 1920
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour, minute, day, date and second time zone / 24-hour
Push Button
B
Quick correction of second time zone / 24-hour
Control Buttons
Push Button A
Quick correction of month
1 2 3
Movement Caliber
9232 / 1920
INFO
Battery: 371 – SR920SW
Month
Minute Hand
Hour Hand
Day
Second Hand
Second time zone / 24 hour
Date
134 135
Setting the Time and 24 Hour
1.1 Pull the crown to position 3.
1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1920
1.1
1.2 1.3
136 137
Setting the Second Time Zone
2.1 Set the crown to position 1.
2.2 Press B step-by-step to advance the hand of the second time zone by one hour per step until the desired time is set.
2.3 Stoppressingthebuttonwhennishedsettingthetimezone.
SETTINGS
Movement Caliber : 9232 / 1920
2.1
2.2 2.3
138 139
Setting the Date
3.1 Pull the crown to position 3.
3.2 Turn the crown clockwise. The date will advance 1 day when the time reaches 00:00 midnight. Continue to turn the crown until the desired date is set.
3.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1920
3.1
3.2 3.3
140 141
Quick Correction of Date
4.1 Pull the crown out to position 2.
4.2 Turn the crown clockwise step-by-step to the desired date.
4.3 Push the crown back to position 1.
!! Attention !!
Please Do Not set between 21:00 and 00:30.
SETTINGS
Movement Caliber : 9232 / 1920
4.1
4.2 4.3
142 143
Setting the Day
5.1 Pull the crown to position 3.
5.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
5.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1920
5.1
5.2 5.3
144 145
Quick Correction of Day
6.1 Set the crown to position 1.
6.2 Press A step-by-step to adjust the month to the desired one.
6.3 Release the button after completing the setting.
!! Attention !!
Please Do Not use Quick Correction on 31st of each month.
SETTINGS
Movement Caliber : 9232 / 1920
6.1
6.2 6.3
146 147
PRESENTATION
Movement Caliber : 9232 / 1930
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour, minute, day, date and second time zone / 24-hour
Push Button
B
Quick correction of second time zone / 24-hour
Control Buttons
Push Button A
Quick correction of month
1 2 3
Movement Caliber
9232 / 1930
INFO
Battery: 371 – SR920SW
Month
Minute Hand
Hour Hand
Second Hand
Second time zone / 24 hour
Date
148 149
Setting the Time and 24 Hour
1.1 Pull the crown to position 3.
1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1930
1.1
1.2 1.3
150 151
Setting the Second Time Zone
2.1 Set the crown to position 1.
2.2 Press B step-by-step to advance the hand of the second time zone by one hour per step until the desired time is set.
2.3 Stoppressingthebuttonwhennishedsettingthetimezone.
SETTINGS
Movement Caliber : 9232 / 1930
2.1
2.2 2.3
152 153
Setting the Date
3.1 Pull the crown to position 3.
3.2 Turn the crown clockwise. The date will advance 1 day when the time reaches 00:00 midnight. Continue to turn the crown until the desired date is set.
3.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1930
3.1
3.2 3.3
154 155
Quick Correction of Date
4.1 Pull the crown out to position 2.
4.2 Turn the crown clockwise step-by-step to the desired date.
4.3 Push the crown back to position 1.
!! Attention !!
Please Do Not set between 21:00 and 00:30.
SETTINGS
Movement Caliber : 9232 / 1930
4.1
4.2 4.3
156 157
Setting the Day
5.1 Pull the crown to position 3.
5.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
5.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1930
5.1
5.2 5.3
Movement Caliber
9232 / 1950
INFO
Battery: 371 – SR920SW
158
PRESENTATION
Movement Caliber : 9232 / 1950
Control Buttons
Crown Positions:
1. Normal position
2. Quick correction of date
3. Setting of hour, minute, day, date
Display Elements
Minute Hand
Hour Hand
Day
Second Hand
Date
1 2 3
159
160 161
1.1
1.2 1.3
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1950
162 163
2.1
2.2 2.3
Setting the Date
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.
2.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1950
164 165
Quick Correction of Date
3.1 Set the crown to position 2.
3.2 Turn the crown clockwise step-by-step to the desired date.
3.3 Push the crown back to position 1.
!! Attention !!
Please Do Not set between 21:00 and 00:30.
SETTINGS
Movement Caliber : 9232 / 1950
3.1
3.2 3.3
166 167
4.1
4.2 4.3
Setting the Day
4.1 Pull the crown to position 2.
4.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
4.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1950
168 169
Movement Caliber
9238 / 1960
INFO
Battery: 371 – SR920SW
PRESENTATION
Movement Caliber : 9238 / 1960
Minute Hand
Hour Hand
Second Hand
24-Hour / Second Time Zone
Date
1 2
Crown Positions:
1. Normal Running
2. Setting of Hour, Minute, Date, 24-Hour
Push Button B
Quick correction of second time zone / 24-hour
Control Buttons
Push Button A
Quick correction of month
170 171
1.1
1.2 1.3
Setting the Time and 24 Hour
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9238 / 1960
172 173
2.1
2.2 2.3
Setting the Second Time Zone
2.1 Set the crown to position 1.
2.2 Press B step-by-step to advance the hour hand of the second time zone until the desired time is set.
2.3 Release the button once set.
!!Attention!!
When using push button B to set the second time zone hour, the center minute hand must be set to between 55th minute and 05th minute at any hour.
SETTINGS
Movement Caliber : 9238 / 1960
174 175
Quick Correction of Date
3.1 Pull the crown to position 2.
3.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.
3.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9238 / 1960
3.1
3.2 3.3
176 177
Quick Correction of Date
3.1 Set the crown to position 1.
3.2 Press A step-by-step to advance the date until the desired date is set.
!!Attention!!
The date advances at 00:00 midnight, not 12:00 noon.
SETTINGS
Movement Caliber : 9238 / 1960
4.1 4.2
178 179
Movement Caliber
9238 / 1970
INFO
Battery: 371 – SR920SW
PRESENTATION
Movement Caliber : 9238 / 1970
Minute Hand
Hour Hand
Day
Second Hand
Date
24-hour / second time zone
1 2
Crown Positions:
1. Normal Running
2. Setting of Hour, Minute, Date, 24-Hour
Push Button B
Quick correction of 24-hour, second time zone
Control Buttons
Push Button C
(Option)
Quick correction of day
Push Button A
Quick correction of date
180 181
1.1
1.2 1.3
Setting the Time and 24 Hour
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9238 / 1970
182 183
2.1
2.2 2.3
Setting the Second Time Zone
2.1 Set the crown to position 1.
2.2 Press B step-by-step to advance the hand of the second time zone by one hour per step until the desired time is set.
2.3 Release the button after completing the setting.
!! Attention !!
When using push button B to set the second time zone hour, the center minute hand must be set to between 55th minute and 05th minute at any hour.
SETTINGS
Movement Caliber : 9238 / 1970
184 185
3.1
3.2 3.3
Setting the Date
3.1 Pull the crown to position 2.
3.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set.
3.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9238 / 1970
186 187
4.1
4.2 4.3
Quick Correction of Date
4.1 Set the crown to position 1.
4.2 Press A step-by-step to advance the date until the desired date set.
!! Attention !!
The date advances at 00:00 midnight, not 12:00 noon.
SETTINGS
Movement Caliber : 9238 / 1970
188 189
5.1
5.2 5.3
Setting the Day
5.1 Pull the crown to position 2.
5.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached.
5.3 Push the crown back to position 0.
SETTINGS
Movement Caliber : 9238 / 1970
190 191
6.1
6.2 6.3
Quick Correction of Day
6.1 Set the crown to position 1.
6.2 Press A step-by-step to adjust the month to the desired one.
6.3 Press C twice to advance the day hand by one step until the desired day is set.
!! Attention !!
Do not use Quick Correction to set the Day between 22:00 at night and 6:00 in the morning.
SETTINGS
Movement Caliber : 9238 / 1970
192 193
Movement Caliber
9239 / 0005
INFO
Battery: 371 – SR920SW Service Life Battery: 40 months 0312204 IM - A
PRESENTATION
Movement Caliber : 9239 / 0005
Minute Hand
Hour Hand
Day
Second Hand
Date
Sun and Moon
1 2
Crown Positions:
1. Normal position
2. Correction of hour, minute, day, date, Sun and Moon
Push Button B
Quick correction of 12h second time zone and day / night
Control Buttons
Push Button A
194 195
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9239 / 0005
1.1
1.2 1.3
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use