Scilogex MX-RD-PRO, MX-RL-PRO User Manual

MX-RD-PRO/MX-RL-PRO

MX-RD-Pro LCD digital Rotator
MX-RL-Pro LCD digital Rotator

User Manual

12300183

Please read
follow all operating and safety instructions!

www.scilogex.com

the User Manual carefully before use, and

Contents

Preface ................................................................................. 1

Service ................................................................................. 1

Warranty .............................................................................. 1

1. Safety Instructions ....................................................... 2

2. Proper Use ................................................................... 3

3. Inspection .................................................................... 3

3.1 Receiving Inspection ............................................. 3

3.2 Listing of Items ..................................................... 3

4. Function ...................................................................... 4

4.1 Control .................................................................. 4

4.2 Display .................................................................. 5

5. Operation ..................................................................... 6

6. Faults ........................................................................... 6

7. Maintenance and Cleaning .......................................... 7

8. Associated standards and regulations .......................... 7

9. Specifications .............................................................. 8

10. Ordering Informations ................................................. 8

Rotator

Preface

Welcome to the “Rotator User Manual”. Users should read
this manual carefully, follow the instructions and
procedures, and beware of all the cautions when using this
instrument.

Service

Please provide the customer care representative with the
following information:

• Serial number ( on the rear panel )

• Certification

• Description of problem ( i.e., hardware or software )

• Methods and procedures adopted to resolve the

problems

• Your contact information

When help needed, you can always contact the service
department of manufacturer for technical support in the
following ways:

SCILOGEX, LLC

500 Four Rod Road
Suite 122
Berlin, CT 06037 USA
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Http://www.scilogex.com

Warranty

This instrument is warranted to be free from defects in
materials and workmanship under normal use and service,
for a period of 24 months from the date of invoice. The
warranty is extended only to the original purchaser. It shall
not apply to any product or parts which have been damaged
on account of improper installation, improper connections,
misuse, accident or abnormal conditions of operation.
For claims under the warranty please contact your local
supplier. You may also send the instrument directly to
manufacturer, enclosing the invoice copy and by giving
reasons for the claim.

1

Rotator

1. Safety Instructions

Warning!

• Read the operating instructions carefully

before use.

• Ensure that only trained staff works with the

instrument.

Protective ground contact！

• Ensure the socket must be grounded

(protective ground contact) before use.

• When working wear personal safety guards to avoid

the risk of:

‐ Splashing liquids
‐ Broken glass containers

• Follow the safety instructions, guidelines and accident

prevention regulations.

• Do not touch the running parts, moving instrument

care not rolling your fingers.

• Set up the instrument in a spacious area on a stable,

clean, non-slip, dry and fireproof surface. Do not
operate the instrument in explosive atmospheres, with
hazardous substances or under water.

• If the instrument does not run smoothly, please

decrease the motor speed.

• Firmly secure the accessories and vessels in place to

avoid damage or risk.

• Preparation of samples may lead to dangerous

flammable. Only process samples that will not react
dangerous.

• Use the standard accessories listed in the “accessories”

section, and follow the instructions to use accessories
to ensure safety. Please switch off the power before
assembly of accessories, confirm the instrument and
accessories are intact before switch on each time.

• The instrument only be opened by expert， please

switch off before use.

• The voltage stated on the nameplate must correspond

to the mains voltage.

• Do not cover the instrument during running. Prevent

the collision and extrusion to instrument and
accessories.

• Keep away from high magnetic field.

2

Rotator

2. Proper Use

The instrument is designed for mixing sticky substance in
schools, laboratories or factories. It can be installed on a
variety of impeller, for different viscosity of the medium.
This instrument is not suitable for using in residential areas
or other constraints mentioned in Chapter 1.
Do not use the accessories recommended by the
manufacturer, or failure to use the instructions, may be
caused unsafe situation.

3. Inspection

3.1 Receiving Inspection

Unpack the instrument carefully and check for any damages
which may have arisen during transport. If it happens,
please contact manufacturer/supplier for technical support.

Note:

If there is any apparent damage to the system,
please do not connect to the power line.

3.2 Listing of Items

Items

Main unit 1
Power cable 1
User manual 1

T able 1

Qty

3

4. Function

4.1 Control

Rotator

Power switch

Angle control knob

Figure 1

Figure 2

Figure 3

4

Rotator

Items Default settings

Mode switch button

Mode

Speed /timer control
knob

Speed/timer light

Speed/Timer

Power/Overload
protection light

Power/Overload

Shift speed and time display.

Set speed and time by rotating
speed/timer control knob. Push
on/off to start/stop rotating function.

Green/Red LED display light.
Different colors of LED light show
the value for speed or time that LCD
screen currently displays. Green
LED light shows that LCD screen
currently displays speed. Red LED
light shows that LCD screen
currently displays time.

Green/Red LED display light.
LED light shows green when switch

on, LED light shows red when starts
overload protection. When the
torque reaches limited value,
overload protection function will be
started. At the same time overload
protection light flashes, while the

system stops running.

LCD display

Power switch I/O

LCD displays the real working state
and all setting values.

Switch ON or OFF the instrument.

Table 2

4.2 Display

Figure 4

Display Descriptions

Set Display when set target value.
Err Display in case of error happening.

Display area When Set displays, this area shows

setting value; When Set disappears, this
area shows running value.

Table 3

5

Rotator

5. Operation

• Place the Rotator in safe and stable surface, ensure the

required operating voltage and power supply voltage
matched, and the socket must be earthed reliably.

• Connect the power cable.

• Switch ON instrument.

• The instrument begins self-checking.

• When initialization is over, LCD displays the last

running values of speed.

• Rotate the speed/timer control knob to set targe t spee d.

a. Press the speed/timer control knob to start
rotating function. Press the knob again to stop rotating
function.
b. Press the mode switch button, LCD displays time,
and then rotating the speed/timer control knob to set
target time. Press the speed/timer control knob to start
rotating function at the set time. During operation,
motion can be stopped at any time by pressing the
speed/timer control knob. If the knob is pressed again,
motion will start again and the timer will restart
countdown. When the timer reaches zero, the unit will

be automatically halted and an alert will sound.
If these operations above are normal, the instrument is
ready to operate. If not, the instrument may be damaged
during transportation, please contact technical support of
manufacturer/supplier.

Note:

The set values can be altered at any time.

6. Faults

• Instrument cannot be powered ON when start rotating

function.

 Check whether the power cable is connected.

• Rotating function suddenly stop

 Power/overload protection light changed to red,

LCD displays “Er 03”, indicate the current failure
is “overload protection”.

 Pressing the speed/timer control knob first to

close rotating function, and then restart rotating
function after lowered load. If rotating function
cannot start, then repeat the process and gradually
reduce load.

6

Rotator

7. Maintenance and Cleaning

• Proper maintenance can keep instrument working

properly and lengthen its lifetime.

• Do not spray cleanser into the instrument when

cleaning.

• Do not remove the power line when cleaning. Only

use recommended cleansers:
Dyes Isopropyl alcohol
Construction

materials
Cosmetics Water containing tenside /

Foodstuffs Water containing tenside
Fuels Water containing tenside

• Before using other method for cleaning or

decontamination, the user must ascertain with the
manufacturer that this method will not damage the
instrument. Wear the proper protective gloves during
cleaning of the instrument.

Water containing tenside /
Isopropyl alcohol

Isopropyl alcohol

Note:

• Electronic device cannot clean with cleanser.

• If you require maintenance service, must be

cleaned the instrument in advance to avoid
pollution of hazardous substances, and to
send back into original packing.

• If the instrument will not use for a long time,

please switch off and place in a dry, clean,
room temperature and stable location.

8. Associated standards and regulations

Construction in accordance with the following safety
standards:
EN 61010-1

UL 3101-1
CAN/CSA C22.2(1010-1)
EN 61010-2-10

Construction in accordance with the following EMC
standards:
EN 61326-1

7

Rotator

Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.

9. Specifications

Items Specifications

Voltage [VAC] 100~240

Items Specifications

Angle range 0°~ 90°
Motor type DC motor
Speed range [rpm] 10~70
Speed display LCD
Timer range [min] 1~1199
Timer display LCD

Run type

Overall Dimensions [mm] 512×190×250
Weight [kg] 6.5

Permissible ambient
temperature [°C]

Permissible relative humidity 80%
Protection class acc. to DIN

EN60529

Timer/Continuous
operation

5－40

IP21

Table 4
Frequency [Hz] 50/60
Power [W] 40

8

Rotator

10. Ordering Informations

Cat. No. Descriptions

MX-RD-Pro, LCD Digital Rotator, used

824232019999

824232119999

824232219999

824232319999

with disk accessories, variable speed,
adjustable mixing angle, US plug,
100V-240V, 50Hz/60Hz

MX-RD-Pro, LCD Digital Rotator, used
with disk accessories, variable speed,
adjustable mixing angle, Cn plug,
100V-240V, 50Hz/60Hz
MX-RD-Pro, LCD Digital Rotator, used
with disk accessories, variable speed,
adjustable mixing angle, Euro plug,
100V-240V, 50Hz/60Hz

MX-RD-Pro, LCD Digital Rotator, used
with disk accessories, variable speed,
adjustable mixing angle, UK plug,
100V-240V, 50Hz/60Hz

824222019999

824222119999

824222219999

824222319999

Accessories

MX-RL-Pro, LCD Digital Rotator, used
with rotisserie accessories, variable
speed，adjustable mixing angle, US plug,
100V-240V, 50Hz/60Hz

MX-RL-Pro, LCD Digital Rotator, used
with rotisserie accessories, variable
speed，adjustable mixing angle, Cn plug,
100V-240V, 50Hz/60Hz
MX-RL-Pro, LCD Digital Rotator, used
with rotisserie accessories, variable
speed， adjustable mixing angle, Euro
plug, 100V-240V, 50Hz/60Hz

MX-RL-Pro, LCD Digital Rotator, used
with rotisserie accessories, variable
speed，adjustable mixing angle, UK plug,
100V-240V, 50Hz/60Hz

Cat. No Descriptions

18900137

Disk, 1.5ml centrifuge tube,
capacity: 60ea

9

Rotator

Cat. No Descriptions

18900138

18900139

18900140

Disk, 15ml centrifuge tube,
capacity: 16ea

Disk, 50ml centrifuge tube,
capacity: 8ea

Post for installing disk
together

1.5ml Centrifuge tube,

18900142

capacity: 48ea, horizontal
mount

15ml Centrifuge tube,

18900143

capacity: 24ea, horizontal
mount

50ml Centrifuge tube,

18900144

capacity: 24ea, horizontal
mount

Cat. No Descriptions

18900145

1.5ml Centrifuge tube,
capacity: 32ea, vertical mount

15ml Centrifuge tube,

18900146

capacity: 16ea, vertical
mount

50ml Centrifuge tube,

18

900147

capacity: 16ea, vertical
mount

Table 5

10

Rotator

Inst

alling rotisserie attachment

Changing attachment

11

SCILOGEX, LLC

1275 Cromwell Ave.

Suite C6

Rocky Hill, CT 06067 USA

Tel: [phone]

Fax: [phone]

[e-mail] | www.scilogex.com