Scilogex 83321001 User Manual

SK-R330-PRO/SK-D3307-PRO/SK-D3309-PRO

User Manual

SK-R330-Pro LCD digital Rocking Shaker
SK-D3307-Pro LCD digital 3D Shaker
SK-D3309-Pro LCD digital 3D Shaker

Please read the User Manual carefully before use, and
follow all operating and safety instructions!

www.scilogex.com

Contents

Preface ................................................................................. 1

Service ................................................................................. 1

Warranty .............................................................................. 1

1. Safety Instructions ....................................................... 2

2. Proper Use ................................................................... 3

3. Inspection .................................................................... 3

3.1 Receiving Inspection ............................................. 3

3.2 Listing of Items ..................................................... 3

4. Control and Display .................................................... 4

4.1 Control .................................................................. 4

4.2 Display .................................................................. 5

5. Operation ..................................................................... 5

6. Faults ........................................................................... 6

7. Maintenance and Cleaning .......................................... 6

8. Associated standards and regulations .......................... 7

9. Specifications .............................................................. 8

10. Ordering Informations ................................................. 9

Rocking Shaker & 3D Shaker

Preface

Welcome to the “Rocking Shaker & 3D Shaker User
Manual”. Users should read this manual carefully, follow
the instructions and procedures, and beware of all the
cautions when using this instrument.

Service

Please provide the customer care representative with the
following information:

• Serial number ( on the rear panel )

• Certification

• Description of problem ( i.e., hardware or software )

• Methods and procedures adopted to resolve the

problems

• Your contact information

When help needed, you can always contact the service
department of manufacturer for technical support in the
following ways:

SCILOGEX, LLC

500 Four Rod Road
Suite 122
Berlin, CT 06037 USA
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]

Http://www.scilogex.com



Warranty

This instrument is warranted to be free from defects in
materials and workmanship under normal use and service,
for a period of 24 months from the date of invoice. The
warranty is extended only to the original purchaser. It shall
not apply to any product or parts which have been damaged
on account of improper installation, improper connections,
misuse, accident or abnormal conditions of operation.
For claims under the warranty please contact your local
supplier. You may also send the instrument directly to
manufacturer, enclosing the invoice copy and by giving
reasons for the claim.

1

Rocking Shaker & 3D Shaker

1. Safety Instructions

Warning!

• Read the operating instructions carefully

before use.

• Ensure that only trained staff works with the

instrument.

Protective ground contact！

• Ensure the socket must be grounded

(protective ground contact) before use.

• When working wear personal safety guards to avoid

the risk of:

‐ Splashing liquids
‐ Broken glass containers

• Follow the safety instructions, guidelines and accident

prevention regulations.

• Do not touch the running parts, moving instrument

care not rolling your fingers.

• Set up the instrument in a spacious area on a stable,

clean, non-slip, dry and fireproof surface. Do not
operate the instrument in explosive atmospheres, with
hazardous substances or under water.

• If the instrument does not run smoothly, please

decrease the motor speed.

• Firmly secure the accessories and vessels in place to

avoid damage or risk.

• Preparation of samples may lead to dangerous

flammable. Only process samples that will not react
dangerous.

• Use the standard accessories listed in the “accessories”

section, and follow the instructions to use accessories
to ensure safety. Please switch off the power before
assembly of accessories, confirm the instrument and
accessories are intact before switch on each time.

• The instrument only be opened by expert， please

switch off before use.

• The voltage stated on the nameplate must correspond

to the mains voltage.

• Do not cover the instrument during running. Prevent

the collision and extrusion to instrument and
accessories.

• Keep away from high magnetic field.

2

Rocking Shaker & 3D Shaker

2. Proper Use

The instrument is designed for mixing sticky substance in
schools, laboratories or factories. It can be installed on a
variety of impeller, for different viscosity of the medium.
This instrument is not suitable for using in residential areas
or other constraints mentioned in Chapter 1.
Do not use the accessories recommended by the
manufacturer, or failure to use the instructions, may be
caused unsafe situation.

3. Inspection

3.1 Receiving Inspection

Unpack the instrument carefully and check for any damages
which may have arisen during transport. If it happens,
please contact manufacturer/supplier for technical support.

Note:

If there is any apparent damage to the system,
please do not connect to the power line.

3.2 Listing of Items

Items

Main unit 1
Power cable 1
User manual 1

T able 1

Qty

3

4. Control and Display

4.1 Control

Rocking Shaker & 3D Shaker

Figure

1 Rocking shaker

Figure 2 3D

Items Descriptions

Speed control
knob

Timer control
knob

Speed display Display the set and real speed values.
Time display Display the set and remain time values.
Power switch Switch ON/OFF instrument.

4

Set target speed. Push on/off the knob to
start/stop the shaking function.

Set target time. Push on/off the knob to
start/stop the shaking function.

shaker

Table 2

Rocking Shaker & 3D Shaker

4.2 Display

Set

Faults

Display Descriptions

Display area When Set display, this area shows

Set

Err

Figure 3

Display

Set Display when set target value.
Err Display in case of error happening.

setting value; When Set disappears, this
area shows running value.

Table 3

5. Operation

• Place the instrument in safe and stable surface, ensure

the required operating voltage and power supply
voltage matched, and the socket must be earthed
reliably.

• Connect the power cable.

• Switch ON instrument.

• The instrument begins self-checking.

• When initialization is over, LCD displays the last

running values of speed.

• Rotate the speed control knob to set target speed.

a. Press the speed control knob to start shaking
function. Press the speed control knob again to stop
shaking function.
b. Rotate the timer control knob to set target time.
Press the timer control button to start shaking function
at the set speed and time. During operation, motion
can be stopped at any time by pressing the speed
control knob or timer control knob. If the timer control
knob is pressed again, the shaking function will start
again and the timer will restart countdown. When the
timer reaches zero, the unit will be automatically

halted and an alert will sound.
If these operations above are normal, the instrument is
ready to operate. If not, the instrument may be damaged
during transportation, please contact technical support of
manufacturer/supplier.

Note:

The speed value can be altered during shaking.

5

Rocking Shaker & 3D Shaker

6. Faults

• When switched ON, the instrument does not work.

 Check whether the power cable is connected.
 Check whether the fuse is broken.

• Shaking function suddenly stop.

 LCD displays “Er 03”, indicate the current failure

is “overload protection”.

 Pressing the speed control knob or timer control

knob first to close shaking function, and then
restart shaking function after lowered load. If
shaking function cannot start, then repeat the
process and gradually reduce load.

7. Maintenance and Cleaning

• Proper maintenance can keep instrument working

properly and lengthen its lifetime.

• Do not spray cleanser into the instrument when

cleaning.

• Do not remove the power line when cleaning. Only

use recommended cleansers:

Dyes Isopropyl alcohol
Construction
materials
Cosmetics Water containing tenside /

Foodstuffs Water containing tenside
Fuels Water containing tenside

Water containing tenside /
Isopropyl alcohol

Isopropyl alcohol

• Before using other method for cleaning or

decontamination, the user must ascertain with the
manufacturer that this method will not damage the
instrument. Wear the proper protective gloves during
cleaning of the instrument.

Note:

• Electronic device cannot clean with cleanser.

• If you require maintenance service, must be

cleaned the instrument in advance to avoid
pollution of hazardous substances, and to
send back into original packing.

• If the instrument will not use for a long time,

please switch off and place in a dry, clean,
room temperature and stable location.

6

Rocking Shaker & 3D Shaker

8. Associated standards and regulations

Construction in accordance with the following safety
standards:
EN 61010-1

UL 3101-1
CAN/CSA C22.2(1010-1)
EN 61010-2-10

Construction in accordance with the following EMC
standards:
EN 61326-1

nges or modifications not expressly approved by the

Cha
party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.

7

Rocking Shaker & 3D Shaker

9. Specifications

Specifications

Items

Voltage [VAC] 100-240 100-240
Frequency

[Hz]
Power [W] 40 50

Tile Angel [o] ±9 ±7, ±9
Max. Shaking

Weight [kg]
Motor Type DC motor DC motor
Speed range

[rpm]
Speed display LCD LCD
Timer range

[min]

Rocking shaker 3D shaker

50/60 50/60

7 5

10-70 10-70

1-1199 1-1199

Specifications

Items

Overall
Dimensions
[mm]

Weight [kg] 12 9
Permissible

ambient
temperature
[°C]

Permissible
relative
humidity

Protection
class acc. to
DIN EN60529

Rocking shaker 3D shaker

360×420×155 430×360×106

5-40 5-40

80% 80%

IP21 IP21

Table 4

Timer display LCD LCD

Run type

Timer/Continuous
operation

Timer/Continuous
operation

8

Rocking Shaker & 3D Shaker

10. Ordering Informations

Cat. No. Descriptions

SK-R330-Pro, LCD Digital Rocking

833210019999

833210119999

833210219999

833210319999

834210019999

834210119999

Shaker, see-saw wave, angle 9°, US
plug, 100V-240V, 50Hz/60Hz

SK-R330-Pro, LCD Digital Rocking
Shaker, see-saw wave, angle 9°, Cn
plug, 100V-240V, 50Hz/60Hz
SK-R330-Pro, LCD Digital Rocking
Shaker, see-saw wave, angle 9°, Euro
plug, 100V-240V, 50Hz/60Hz

SK-R330-Pro, LCD Digital Rocking
Shaker, see-saw wave, angle 9°, UK
plug, 100V-240V, 50Hz/60Hz

SK-D3307-Pro, LCD Digital 3D
Shaker, angle 7°, US plug, 100V-240V,
50Hz/60Hz
SK-D3307-Pro, LCD Digital 3D
Shaker, angle 7°, Cn plug, 100V-240V,
50Hz/60Hz

834210219999

834210319999

834220019999

834220119999

834220219999

834220319999

SK-D3307-Pro, LCD Digital 3D
Shaker, angle 7°, Euro plug,
100V-240V, 50Hz/60Hz

SK-D3307-Pro, LCD Digital 3D
Shaker, angle 7°, UK plug, 100V-240V,
50Hz/60Hz
SK-D3309-Pro, LCD Digital 3D
Shaker, angle 9°, US plug, 100V-240V,
50Hz/60Hz

SK-D3309-Pro, LCD Digital 3D
Shaker, angle 9°, Cn plug, 100V-240V,
50Hz/60Hz

SK-D3309-Pro, LCD Digital 3D
Shaker, angle 9°, Euro plug,
100V-240V, 50Hz/60Hz
SK-D3309-Pro, LCD Digital 3D
Shaker, angle 9°, UK plug, 100V-240V,
50Hz/60Hz

9

Rocking Shaker & 3D Shaker

Accessories

Cat. No. Descriptions

SK330.5 Dish plateform with

18900155

18

900027

18900028

900040

18

18

900029

18900030

non-slip mat and fixed string
(8 pcs)

SK330.1 Universal
attachment

SK330.2 Fixing clip
attachment

SK330.3 Lengthways roller
Attachment

SK180.2.1/ SK330.2.1 Fixing
clip for flask volume 25 ml

SK180.2.2/ SK330.2.2 Fixing
clip for flask volume 50 ml

Cat. No. Descriptions

18900031

18900032

18900033

900036

18

SK180.2.3/SK330.2.3 Fixing
clip for flask volume 100 ml

SK180.2.4/SK330.2.4 Fixing
clip for flask volume 200/250
ml

SK180.2.5/SK330.2.5 Fixing
clip for flask volume 500 ml

Bar for SK330.1 Universal
attachment, black

Table 5

SCILOGEX, LLC

1275 Cromwell Ave.

Suite C6

Rocky Hill, CT 06067 USA

10

Tel: [phone]

Fax: [phone]

[e-mail] | www.scilogex.com