Scilogex 81131102 User Manual

MS-H-S10/MS-M-S10 Hotplate/Magnetic Stirrer

MS-H-S10 10-Channel Analog Hotplate Magnetic Stirrer

MS-M-S10 10-Channel Analog Hotplate Magnetic Stirrer

Please read the User Manual and the related Video of this
instrument on our website carefully before use, and follow
all operating and safety instructions!

The website www.scilogex.com

User Manual

Cat No.12300136

1

Contents

Contents 1
Preface 2
Service 2
Warranty 2
1 Safety Instructions 3
2 Propervse 4
3 Inspection 4

3.1 Receiving Inspection 4

3.2 Listing of Items 4
4 Trial run 5
5 Control Elements 5
6 Operation 6
7 Faults 6
8 Maintenance and Cleaning 6
9 Associated Standards and Regulations 7
10 Technical Data 7
11 Products and Accessories 8

2

MS-H(M)-S10 10-Channel Analog (Hotplate) Magnetic Stirrer

Preface

Welcome to the “10-Channel Analog Hotplate Magnetic
Stirrer User Manual”. Users should read this Manual
carefully, follow the instructions and procedures, and beware
of all the cautions when using this instrument.

Service

When help needed, you can always contact the sevice
of manufacturer for technical support in the following ways:

SCILOGEX, LLC
500 Four Rod Road
Suite 122
Berlin, CT 06037
USA
Tel：1- [phone]
Fax：1- [phone]
E-mail: [e-mail]
Website：Http://www.scilogex.com

department

• Description of problem (i.e., hardware or software)

• Methods and procedures adopted to resolve the problems

• Your contact information

Warranty

You have purchased a scilogex instrument. This instrument is
warranted to be free from defects in materials and workmanship
under normal use and service, for a period of 24 months from
the date of invoice. The warranty is extended only to the
original purchaser. It shall not apply to any product or parts
which have been damaged on account of improper installation,
improper connections, misuse, accident or abnormal conditions
of operation.
For claims under the warranty please contact your local
dealer. You may also send the instrument direct to our works,
enclosing the invoice copy and by giving reasons for the
claim. You would be solely liable for freight costs.

Please provide the customer care representative with the
following information:

• Se

rial Number（on the rear panel）

3

MS-H(M)-S10 10-Channel Analog (Hotplate) Magnetic Stirrer

1 Safety Instructions

Warning!

• Read the operating instructions carefully
before using the instrument.

• Ensure that only trained staff work with the
instrument.

• Forb id to heat the su bstances with low­burning point or easy-volatile（MS-H-S10）

Risk of burn!

• Caution when touching the housing parts and
the heating plate. The heating plate can reach
temperatures of 120 ℃.

• Pay attention to the re s i d u a l heat after
switching OFF the instrument.

Protective ground contact！

• Make su r e that socket must be earthed
(protective ground contact) before use.

• When work ，wear the personal guard to avoid the risk
from:

- Splashing and evaporation of liquids

- Release of toxic or combustible gases.

• Set up the instrument in a spacious area on an stable,

clean, non-slip, dry and fireproof surface, do not operate
the instrument in explosive atmospheres, with hazardous
substances or under water.

• Gradually increase the speed. Reduce the speed if :

- The stirring bar breakaway because of too high speed

- The instrument is not running smoothly, or container
moves on the base plate.

• Temperature must always be set to at least 25 ℃ lower
than the burning point of the media used.

• Beware of hazards due to:

- Flammable materials or media with a low boiling
temperature

- Overfilling of media

- Unsafe container

• Process pathogenic materials only in closed vessels.

• If the case of the stirrer bar is PTFE,please note：

- Elemental fluorine, three fluoride and alkali metals will
corrode the PTFE and Halogen alkanes make it expansion at
room temperature

- Molten alkali ，alkaline earth metals or their solution,
as well as the powder in second and third ethnic of the
periodic table of elements will have chemical reaction with
PTFE when temperature reaches 300 ~ 400 ℃ .

• The voltage stated on the label must correspond to the
main power supply.

4

MS-H(M)-S10 10-Channel Analog (Hotplate) Magnetic Stirrer

>100 mm

>100 mm

• Ensure that the mains power supply cable does not touch
the heating base plate. Do not cover the device.

• The instrument may only be opened by trained experts

• Keep away from high magnetic field.

• Observe the minimum distances between the devices,

between the device and the wall and above the assembly
(min. 100 mm).

Figure 1

2 Proper use

The instrument is designed for mixing and/or heating liquids
in schools, laboratories or factories. This device is not
suitable for using in residential areas or other constraints

mentioned in Chapter 1.

3 Inspection

3.1 Receiving Inspection

Unpack the equipment carefully and check for any damages
which may have arisen during transport. If it happens, please
contact manufacturer for technical support.

Note:
If there is any apparent damage to the system,
please do not plug it into the power line.

3.2 Listing of Items

The packing includes the following items:

Items Qty

Main unit 1

Power cable 1

Stirrer bar 2

User manual 1

Table 1

5

MS-H(M)-S10 10-Channel Analog (Hotplate) Magnetic Stirrer

4 Trial run

•　Make sure the required operating voltage and power
supply voltage match.

•　Ensure the socket must be earthed.

•　Ensure the power be off and the speed control knob and

the temperature control knob at the lowest position

•　Plug in the power cable，ensure the power be ON（Figure 3）

•　Add the medium into the vessel with a stirring bar.

•　Put the vessel above spots on the plate.

• 　Turn the speed control knob slowly to the ideal scale

• 　Turn the temperature control knob slowly to the ideal

scale（MS-H-S10）

•　Keep the temperature control knob and the speed control
knob slowly to the lowest position to turn off the function.
If these operations above are normal, the device is ready
to operate. If these operations are not normal, the device
may be damaged during transportation, please contact
manufacturer for technical support.

5 Control elements

Power

LED

Temperature control knob

(MS-H-S10)

Items Descriptions

Set the rated rotary speed in the safe
Speed control
knob

stirring range from 0 to 1100 rpm. The

function “Stirring” is switched ON

or OFF via the knob.

Se t th e ra t ed tem per a tu r e in th e
Temperature
control knob
（MS-H-S10）

sa f e tem p erature ra nge from room

temperature to 120℃. The function

“heating” is switched ON or OFF

via the knob.

Speed control knob

Figure 2

Figure 3

Stirring point

working plate

6

MS-H(M)-S10 10-Channel Analog (Hotplate) Magnetic Stirrer

LED Power

Mains switch Switch ON or OFF.

When the device is switched ON, the
LED power is lit.

Table 2

6 Operation

• Ensure the temperature control knob and the speed Control
knob at the lowest position .Put the device on the stable and
safe place and plug in the mains power.

• Turn ON the power switch and LED power is lit.

• Turn the speed control knob to set the rated rotary speed in

the safe speed limit from 0 to 11

• Turn th e temp e r ature cont r o l kno b to se t the rated
temperature in the safe limit from room temperature to
120℃(MS-H-S10).

• The device begins to work.

Note:
If there is any apparent damage to the system,
please do not plug it into the power line.

00 rpm.

7 Faults

• If a unit fault happens, please power down the instrument.

• Switch ON the unit again.

• The stirring function will continue to operate at the speed

set point before the fault took place.

• The heating function will continue to operate at the set
point before the fault took place.

• If the problem is not solved, please contact the technical
s

ervice center.

8 Maintenance and Cleaning

• Proper use and maintenance can keep instruments working
in a good state and lengthen its life time.

• Be careful not spray the cleanser into the instrument when
cleaning.

• Unplug the power line when cleaning.

• Only use cleanser that we advised as below:

Dyes Isopropyl alcohol

Construction

materials
Cosmetics Water containing tenside / isopropyl alcohol
Foodstuffs Water containing tenside

Fuels Water containing tenside

• Other method ,please contact manufacturer.

• Wear the proper protective gloves during cleaning of the

instrument.

Water containing tenside / isopropyl alcohol

Table 3

7

MS-H(M)-S10 10-Channel Analog (Hotplate) Magnetic Stirrer

• Before using other method for cleaning or decontamination,
the user must contact the manufacturer ascertain that this
method does not destroy the instrument.

• The instrument must be cleaned and put it into the initial
packaging carton before sending to service for repair,
avoiding the contamination of hazardous.

• Use the instrument in a dry clean room and temperature
stable environment.

9 Associated standards and regulations

Construction in accordance with the following safety
standards:
EN 61010-1
UL 3101-1
CAN/CSA C22.2(1010-1)
EN 61010-2-10
Constructi on in accordance with the follow ing EMC
standards:
EN 61326-1
Associated EU guidelines:
EMC-guidelines: 89/336/EWG
Machine guidelines: 73/023/EWG

10 Technical data

Items Parameters
Voltage [VAC] 200-240/100-120
Frequency [Hz] 50/60

Power [W]

Stirring point position quantity 10
Max. stirring quantity of single
stirring position(H

O) [L]

2

Stirring position interval [mm] 90
Single stirring position speed
error [%]
Max. stirring quantity (H

O) [L] 4

2

Max. magnetic bar [mm] 30

Motor type

Motor rating input [W] 12
Motor ratin

g output [W] 4
Speed range [rpm] 0 – 1100
Speed display Scale
Heating Power[W] 470(MS-H-S10）
Tempeature range[℃] RT~120(MS-H-S10）
Temperature display[℃] Scale(MS-H-S10)

20(MS-M-S10)

490(MS-H-S10)

0.4

5

External rotor

brushless motor

8

MS-H(M)-S10 10-Channel Analog (Hotplate) Magnetic Stirrer

Material of plate Silicone Films
Dimension of plate [mm] 180×450
Dimensions (W×D×H) [mm] 182×552×65
Weight [kg] 3.2
Permitted ambient
temperature[℃]

5－40

Permitted relative humidity 80%
Protect ion class acc . to DIN
60529

IP42

Table 4

11 Products and Accessories

Cat.No. Description
811321019999 M S - H - S 1 0 1 0 -C ha n n e l A na l o g

Ma gn e t i c St i rr er Wi t h He a t， Cn
plug,220V/50Hz/60Hz

811321029999 M S - H - S 1 0 1 0 -C ha n n e l A na l o g

Magnet i c St ir r er With He a t ， US A
plug,110V/50Hz/60Hz

811321039999 M S - H - S 1 0 1 0 -C ha n n e l A na l o g

Magnetic Stir r e r With Heat，Eur o
plug,220V/50Hz/60Hz

811321049999 M S - H - S 1 0 1 0 -C ha n n e l A na l o g

M a g n e t i c S t i r r e r Wi t h H e a t ，
UKplug,220V/50Hz/60Hz

811321089999 M S - H - S 1 0 1 0 -C ha n n e l A na l o g

Magnet i c St ir r er With He a t ， US A
plug,220V/50Hz/60Hz

811311019999 M S - M - S 1 0 1 0 - C h a n n el A n a l o g

Magneti c Stirrer Wi thout Hea t，Cn
plug,220V/50Hz/60Hz

811311029999 M S - M - S 1 0 1 0 - C h a n n el A n a l o g

Magnetic Stirrer Without Heat，USA
plug,110V/50Hz/60Hz

811311039999 M S - M - S 1 0 1 0 - C h a n n el A n a l o

Magnetic Stirrer Without Heat，Euro
plug,220V/50Hz/60Hz

811311049999 M S - M - S 1 0 1 0 - C h a n n el A n a l o g

Magnetic Stirrer Without Heat，UK
plug,220V/50Hz/60Hz

811311089999 M S - M - S 1 0 1 0 - C h a n n el A n a l o g

Magnetic Stirrer Without Heat，USA

plug,220V/50Hz/60Hz
Accessories
Cat.No Description
18900006 Stirring bars（10mm x 6mm），1pcs/pk
18900007 Stirring bars（15mm x 8mm），1pcs/pk

g

MS-H(M)-S10 10-Channel Analog (Hotplate) Magnetic Stirrer

18900008 Stirring bars（20mm x 8mm），1pcs/pk
18900009 Stirring bars（25mm x 8mm），1pcs/pk
12500005 Stirring bars（30mm x 6mm），1pcs/pk
18900011 Stirring bars（40mm x 8mm），1pcs/pk
18900015 Stirring bar mover，1pc

Table 5

SCILOGEX, LLC

1275 Cromwell Ave.

Suite C6

Rocky Hill, CT 06067 USA

Tel: [phone]

Fax: [phone]

[e-mail] | www.scilogex.com