SCIFIT PRO2,PRO1000 User's Operation Manual

Users’ Operations Manual

PRO2

®

PRO1000

PRO2

®

Total Body Exerciser

&

PRO1000 Upper Body Exerciser

Before using this product, read this manual and
follow all safety rules and operating instructions.

This page purposely left blank

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

TABLE OF CONTENTS

SAFETY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

SETUP & INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 14

PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

KEYPAD FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

BIOMECHANICAL POSITIONING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19

ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21

HEART RATE TRANSMITTER STRAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

PROGRAM INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-31

MAINTENANCE & SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-37

Order Online 24/7 at www.SCIFIT.COM

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

SAFETY INFORMATION

The purpose of safety symbols is to attract your
attention to possible dangers. The safety symbols,
and their explanations, deserve your careful attention
and understanding. The safety warnings do not, by
themselves, eliminate any danger. The instructions
or warnings they give are not substitutes for proper
accident prevention measures.

Look for these symbols to point out important safety
precautions. It means attention! Your safety is
involved.

WARNING

Failure to obey a safety warning can result in injury
to yourself and others. Always follow the safety
precautions to reduce the risk of personal injury.

CAUTION

Failure to obey a safety caution can result in injury
to yourself and others. Always follow the safety
precautions to reduce the risk of personal injury.

Read all instructions before using your SCIFIT
exercise machine. Save these instructions for future
reference.

Close supervision is necessary when exercise machine
is being used by or near children, or individuals with
disabilities. Keep children away from extended hand
and foot supports.

Use the exercise machine only for its intended use as
described in this manual. Do not use attachments not
recommended by the manufacturer.

Never drop or insert any object into any opening.

Do not use outdoors or in a harsh environment where
water is present (i.e. pool or spa areas).

1

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

INTRODUCTION

Thank you for your purchase of the SCIFIT PRO2
Total Body Excerciser or PRO1000 Upper Body
Exerciser. We have incorporated the finest technology
and ergonomic design into this machine to assist you in
achieving your fitness goals. However, for your safety,
please adhere to the following recommendations
before you begin to exercise.

The SCIFIT PRO2 and PRO1000 are designed for Class
“S” (Studio), Class “I” (Special Needs) and Class ”II a”
(Medical Device Directive) applications. The intended
uses are for Cardio & Pulmonary Rehabilitation as
well as Sports Medicine, Physical Therapy, Physical
Conditioning and Strength Training. SCIFIT equipment
is suitable for placement in fitness, medical rehab,
sports performance and recreational facilities.
200 levels of computer controlled resistance
ensures that users of all fitness levels will be able to
get a challenging but not overwhelming workout.

Consult Your Physician

Consult your physician or medical specialist before
participating in any exercise p
you are pregnant, or if you are suffering from: heart
disease, respiratory disease, diabetes, hypertension,
high blood pressure, elevated cholesterol, arthritis, or
any other diseases or physical complaints.

Adult Usage

SCIFIT equipment is designed and intended for adult
usage and children of appropriate ages while being
supervised. Young children should be kept a safe
distance away from equipment.

Cool Down

To prevent muscle injuries and soreness, you should
always cool down (at least 5 minutes) by doing a
series of stretches after each workout.

rogram, especially if

®

CAUTION

Always stretch after a workout session to reduce
the risk of personal injury. Failure to stretch
properly may result in injury to yourself.

Guidelines for Healthy Adults

The American College of Sports Medicine (ACSM) and
the American Heart Association (AHA) are continuously
updating guidelines and recommendations for physical
activity.

The current basic recommendations from ACSM and
AHA is:

Do moderately intense cardio 30 minutes a day, five
days a week.
OR
Do vigorously intense cardio 20 minutes a day, three
days a week.
AND
Do eight to ten strength-training exercises, eight to
twelve repetitions of each exercise twice a week.

Moderate-intensity physical activity means working
hard enough to raise your heart rate and break a

It should be noted that to lose weight or maintain
weight loss, 60 to 90 minutes of physical activity may
be necessary. The 30 minute recommendation is
for the average healthy adult to maintain health and
reduce the risk for chronic disease.

To review the latest guidelines and recommendations,

deM stropS fo egelloC naciremA eht tisiv

www.acsm.org

WARNING

Stop exercising immediately if you feel nausea,
dizziness, sharp pain, or any other physical
discomfort. Failure to stop excercising can result in
injury or death to yourself.

Train Intelligently

To ensure a future of good health, you should always
eat well balanced meals, drink plenty of fluid/water

Always follow training guidelines that are specific for
your own physical condition.

WARNING

Injuries to health may result from incorrect or
excessive training. Failure to stop excercising can
result in injury or death to yourself.

.noitasrevnoc a no yrrac ot elba gnieb llits tey ,taews

:etisbew enici

.yltnegilletni gnisicrexe yb tfi yats dna ,tuokrow a gnirud

2

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

SPECIFICATIONS

Weight . . . . . . . . . PRO2 - 230 lbs. / 104 Kg. . . . . . PRO1000 - 220 lbs. / 100 Kg.

Max User Weight . . 350 lbs. / 159 Kg.

Power . . . . . . . . . . Self generating w/auto recharge battery back-up.

Optional Low Voltage AC adapter available.
Resistance System . Electromagnetic Self Generating Bi-directional Resistance

Work Load . . . . . . . Manual, Fit Quik, Constant Workout, ISO-Strength, 7 Pre-programmed Hills profiles

Heart Rate, Power Fit Test, Power Fit Training, Heart Fit Test, Heart Fit Training

Stress Test and Random

Accuracy Class. . . . . Class A

Warranty . . . . . . . . Within U.S. & Canada 3 years parts, 1 year labor

Outside U.S. 3 years parts, no labor

61”

1524 mm

30”

762 mm

61.5”

1562 mm

3

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

SETUP & INSTALLATION

Placement of Cardiovascular Machine

To aid in the placement of equipment, two wheels are
located on the front of the unit. Movement of machine
should be done with two people. Carefully lift the rear
of unit until wheels are engaged on floor and position
unit in desired location.

Position the unit in a location that has a stable and
level sub-floor. Equipment should be positioned in
a location that is not in direct sunlight, in areas of
extreme temperature and humidity, or where the
equipment may be splashed with water or fluids. This
machine is intended for indoor use only.

Equipment should be positioned with a safety perimeter
of 40” or 1 meter around unit.

WARNING

Failure to place the equipment on a stable and level

sub-floor with a safety perimeter can result in injury
to yourself and others.

Endcap

40” / 1 Meter

Safety Space

40” / 1 Meter

Safety Space

Endcap

40” / 1 Meter

Safety Space

Level Cardiovascular Machine

If the sub-floor is unlevel, the unit is equipped with
leveling end caps. The end caps are designed with
the recess of end cap off centered. This allows you
to rotate the endcap(s) to a position that will level the
equipment. After adjustment, check and make sure
end caps ar

e fully seated against base frame tubes.

Offset Endcap

40” / 1 Meter

Safety Space

Proper Supervision

Close supervision is required when the exercise
machine is being used by or near individuals with
disabilities. Keep unsupervised children outside the
safety perimeter.

Cleaning

Never clean the machine with organic solvents,
alcohol or bleach based cleaners. To promote a
healthy environment, wipe any sweat off of unit with
a commercially manufactured wipe designed for the
fitness industry, or a damp cloth.

4

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

ASSEMBLY

Assembly

For equipment that is shipped overseas, some assembly is
required. Follow the steps below for assembly.

Required Tools:

Required Parts:

Item Qty. Description Part #

1 6 3/8” x 1” Socket HD Cap Bolt N/A

2 6 3/8” Split Lock Washer N/A
3 6 3/8” Flat Washer N/A

Long Needle Point Center Punch
5/16” Allen Drive Socket

Ratchet
Torque wrench

Assemble Monocoque Frame to Base Frame

With the aid of a second person, align bottom mounting
threaded nutserts of Monocoque Frame with the Base
Frame mounting holes.

Starting on the right side,
(A) Insert a long needle point center punch through the
front threaded mounting hole of the base frame.
(B) Push up on the frame until the nut-serts are aligned
with the mounting holes
(C) Slide (Qty.1) 3/8” split washer and (Qty.1) 3/8” flat
washer onto three 3/8” bolts, align and loosely thread
two of the bolts into remaining open mounting holes.
(D) Remove the center punch and loosely thread in the
third bolt.

(E) Repeat step A-D for the left side.
(F) Tighten all bolts to 48 ft/lbs or 576 in/lbs (65 nm).

(B)

(C)

(E)

3

2

1

(D)

(A)

5

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

ASSEMBLY

SWIVEL SEAT ASSEMBLY

Step 1:

Pull upward the yellow paddle handle of the seat adjustment lever, then lift and slide the seat post onto
the frame track making sure the roller guide rail is between the top and bottom wheels of the base.

Roller guide

Step 2:

Attach the handlebar plate to the seat post with (Qty. 4) of items #1, #2,
#3 and #4 as shown on the drawing below.

#1

Tools Required:

3/16 Hex wrench
1/2” Wrench or socket

#2
#3
#4

Item #1 (x 4)
5/16-18 x 1 Socket Flat Head Screw

Item #2 (x 4)
5/16 Flat Washer

Item #3 (x 4)
5/16 Split Washer

Item #4 (x 4)
5/16 Nut

SCIFIT • Scientific

Solutions for Fi

6

tness • SCIFIT • Scientific

Solutions for Fi

tness •

SCIFIT

ASSEMBLY

SWIVEL SEAT ASSEMBLY CONT’D

Step 3: (Bucket Seat Assembly )

a. Align the front holes of the bucket seat with the 3rd set of holes from the front of the handlebar plate,
(see diagram), then loosely screw in (Qty. 1) of item #1 into one of the front holes.
b. Align the other three holes and loosely screw in item #1 into each hole.
c. Tighten all four screws to secure the bucket seat.

Front holes for Bucket seat

Tools Required:

1/2” Wrench or socket

Item #1 (x 4)
5/16-18 x 1.25 Serrated Screw

Rear holes for Bucket seat

#1

Step 3a: (2-Piece Seat Assembly)

a. Align the front two holes of the seat mount plate with the 1st set of holes of the handlebar plate
(see diagram), then insert (Qty. 1) of item #1 into one of the front holes to hold the seat mount plate
in place.
b. Align the front hole of the bottom seat pad with the inserted screw and loosely screw it into the seat pad.
c. Align the other front hole of the seat pad and loosely screw in (Qty. 1) of item #1 screw.
d. Slide (Qty. 1) of item #3, then (Qty. 2) of item #4 onto each item #2 screws, then loosely screw
them into the rear two holes of the seat pad.
e. Tighten all four screws to secure the bottom seat pad and plate mount.

Two front holes to mount Seat plate

Tools Required:

1/2” Wrench or socket

Bottom Seat Pad

Item #1 (x 2)
5/16-18 x 1.25 Serrated Screw

Item #2 (x 2)
5/16-18 x 1 Hex Head Screw

Item #3 (x 2)
5/16 Split Washer

Item #4 (x 4)
5/16 Flat Washer

SCIFIT • Scientific

Solutions for Fi

Rear holes to mount Seat plate

7

tness • SCIFIT • Scientific

#1 #2

Solutions for Fi

Seat Mount Plate

#4
#3

SCIFIT

tness •

ASSEMBLY

FIXED SEAT ASSEMBLY

Step 1:

Pull upward the yellow knob of the seat adjustment lever, then lift and slide the seat post onto
the frame track making sure the roller guide rail is between the top and bottom wheels of the base.

Roller Guides

Step 2: (Bucket Seat Assembly)

a. Align one of the front two holes of the Bucket seat with the front set of holes on the fixed seat mount
(see diagram), then insert (Qty. 1) of item #1 into one of the seat holes and loosely tighten into place.
b. Align the second front hole of the seat and loosely tighten with (Qty. 1) item #1 screw.
d. Insert and loosely tighten the remaining two rear holes with (Qty. 2) item #1 screws.
e. Tighten all four screws to secure the seat to the fixed seat mount.

Align holes of seat with these
holes on the fixed seat mount.

Tools Required:

1/2” Wrench or socket

Front

Item #1 (x 4)
5/16-18 x 1.25 Serrated Screw

SCIFIT • Scientific

Solutions for Fi

8

tness • SCIFIT • Scientific

Solutions for Fi

Rear

tness •

SCIFIT

ASSEMBLY

FIXED SEAT ASSEMBLY CONT’D

Step 2a: (2-Piece Seat Assembly)

a. Align the front two holes of the seat mount plate with the 1st set of holes of the fixed seat mount.
(see diagram), then insert (Qty. 1) of item #1 into one of the front holes to hold the seat mount plate
in place.
b. Align the front hole of the bottom seat pad with the inserted screw and loosely screw it into the seat pad.
c. Align the other front hole of the seat pad and loosely screw in (Qty. 1) of item #1 screw.
d. Align, then loosely screw in (Qty. 2) of item #1 into the two remaining rear holes.
e. Tighten all four screws to secure the bottom seat pad and plate mount.

(Item #1) x 4

Low back seat assembly
shown for clarity

Tools Req u ired:
1/2” Wrench or socket

Item #1 (x 2)
5/16-18 x 1.25 Serrated Screw

Align bottom seat pad holes
with these four hole locations

9

SCIFIT • Scientific S olutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCI FI T

ASSEMBLY

Verify Upper Cranks Are Secure

During shipment it is possible that the two set screws securing the crank hub to the shaft may become slightly loose.
It is strongly recommended that these set screws be checked before attaching the crank handles.
The following steps will explain this procedure.

Tools Required:

5/ 16 Hex bit
Tor que wrenc h set for 480 in/ lbs (5.54 Kg/m).

Step 1:

Starting on the right side, use a 5/16 Hex bit to remove the
1st set screw #P3110 (5/8-18 x .5 Socket) and place to the
side.

Step 2:

Using a 5/16 Hex bit and Torque wrench set at 480 in/lbs.
Insert the bit into the crank hub to reach the 2nd set screw
#P3111 (5/8-18 x .75 Socket) and TIGHTEN to the 480 in/lb

setting on the wrench.

Note: The w ren ch w ill click w hen it has reached the
48

Step 3:

Again using a 5/16 Hex bit and Torque wrench set at
480 in/lbs, reinsert the set screw removed in step 1 into the
crank hub and TIGHTEN to the 480 in/lb setting on the
wrench.

Step 4:

Repeat steps 1 thru 3 for the left side.

0 in / lb (5.54 Kg/m) setti n g.

10

SCIFIT • Scientific S olutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCI FI T

ASSEMBLY

Verify Lower Cranks Are Secure (PRO2 Only)

During shipment it is possible that the two set screws securing the crank hub to the shaft may become slightly loose.
It is strongly recommended that these set screws be checked before attaching the crank handles.
The following steps will explain this procedure.

Tools Required:

5/ 16 Hex bit
Tor que wrenc h set for 480 in/ lbs (5.54 Kg/m)

Adjustable Lower Cranks (PRO2 Only)

Step 1:

Starting on the right side, use a 5/16 Hex bit to remove the
1st set screw #P3110 (5/8-18 x .5 Socket) and place to the
side.

Step 2:

Using a 5/16 Hex bit and Torque wrench set at 480 in/lbs.
Insert the bit into the crank hub to reach the 2nd set screw
#P3111 (5/8-18 x .75 Socket) and TIGHTEN to the 480 in/lb
setting on the wrench.

Note: The w ren ch w ill click w hen it has reached the
48

Step 3:

Again using a 5/16 Hex bit and Torque wrench set at
480 in/lbs, reinsert the set screw removed in step 1 into the
crank hub and TIGHTEN to the 480 in/lb setting on the
wrench.

Step 4:

Repeat steps 1 thru 3 for the left side.

0 in / lb (5.54 Kg/m) set ting.

11

SCIFIT • Scientific S olutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCI FI T

ASSEMBLY

Verify LWR Fixed Cranks Are Secure (PRO2)

Your machine may have the lower fixed crank hub option, these
hubs are usually removed for shipment purposes. If this is the
case, attaching them is very simple. The following will explain
the steps necessary to attach the hubs.

Tools Required:

5/ 16 Hex bit
Tor que wrenc h set for 480 in/ lbs (5.54 Kg/m)

Step 1:

Starting on the left side, slide the hub onto the lower shaft
of the machine, allowing 3/4” between the frame and the
end of hub. Align the set screw hole over the flat
surface area of the shaft, then use a 5/16 hex bit to secure
#P3111 (5/8-18 x .75 Socket) set screw as shown in the
drawing.

Step 2:

Using a 5/16 Hex bit and Torque wrench set at 480 in/lbs,
TIGHTEN the set screw to this setting.

Note: The w ren ch w ill click w hen it has reached the
480 in / lb (5.54 Kg/m) sett i ng.

Step 1

Step 3:

Using a 5/16 Hex bit insert and secure #P3110
(5/16-18 x .5) set screw on top of the set screw #P3111
previously inserted in steps 1 and 2.

Step 4:

Tehn using a 5/16 Hex bit and Torque wrench set at 480 in/lbs,
TIGHTEN the set screw as done in step 2.

Note: The w ren ch w ill click w hen it has reached the
480 in / lb setti n g (5.54 Kg/m)

Step 5:

Repeat steps 1 thru 4 for the under side of the hub.

Step 6:

Repeat steps 1 thru 5 for the right side of the machine.

Step 2

Step 3 & 4

12

SCIFIT • Scientific S olutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCI FI T

ASSEMBLY

Assemble Hand Crank Handles to Hubs

Identify Left and Right Hand Crank Handles

Left Hand

Crank Handle

Right Hand

Crank Handle

(A) Insert parallel rods through bearing holes of hub.
(B) Pull yellow crank arm locking pin out and push

rods through until end of rod protrudes from farside.
(C) To prevent unwanted dropping of crank arm when
adjusting crank arm positions, install a 1/4-20 x 1/2”
socket button head screw and 1/4” washer into the
end of each rod.

Assemble Foot Crank Pedals to Hubs(PRO2 Only)

Identify Left and Right Foot Crank Pedals

Left Foot

Crank Pedal

Right Foot

Crank Pedal

(A) Insert parallel rods through bearing holes of hub.
(B) Pull yellow crank arm locking pin out and push

rods through until end of rod protrudes from farside.
(C) To prevent unwanted dropping of crank arm when
adjusting crank arm positions, install a 1/4-20 x 1/2”
socket button head screw and 1/4” washer into the
end of each rod.

(A)

1/4-20 x 1/2”

SBH Screw

(A)

(B)

1/4-20 x 1/2”

SBH Screw

(C)

1/4” Washer

(B)

1/4” Washer

(C)

13

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

ASSEMBLY

Optional Wheelchair Platform (#1180)

To install the optional wheelchair platform you must
first remove the seat assembly from the base. Pull up
on the yellow T-handle seat adjustment rod and slide

the seat assembly completely off the roller track.

Pull T-handle
up and hold

Move seat off
of roller track

With the aid of an assistant, carefully raise the base
up, and lower the work console down until the console
is resting on the floor. To prevent damage to the
covers place a pad, piece of carpet or cardboard
between the case and floor.

(A) With a 1/2” socket, loosen the four back end bolts
that secure the stainless steel adjustment track to the
base frame just enough to slide the platform under
the lockwasher. NOTE: Do not remove the bolts.

(B) Slide the platform slots between the lockwasher
and the frame, with the flat surface of the platform
flush against the frame.

(C) tighten the four bolts, then repeat the process
for the other side.

After securing the platforms with the help of
another person, carefully lift and set the machine to
it’s normal position, then reinstall the seat assembly
the same way it was removed from the seat track.

CAUTION

Monocoque Frame is top heavy.Two people are
required to position frame in place. Failure to support
frame properly may result in injury to yourself and/or
others.

Protective Pad

(A) Loosen
Four (4) Bolts

(B) Slide Slots
Under Washers

(C) Tighten Bolts

14

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

Adjustable Display

Adjustable or Fixed
swivel seat

PRODUCT OVERVIEW

Water Bottle

Holder

Adjustable
Arm Crank

Adjustable

Foot Crank

(PRO2 Only)

Wheelchair

Tie Down Anchor

Transport Wheels

Horizontal

Seat Adjustment

Foot Assist

Seat Adjustment Rod

Vertical and Rotational
lever

Leveling Base

Endcaps

15

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

Work Level Sta tus LCD Screen -

The Work Level Status L C D Screen gives
a progressive real-time indication of the
current work level of any and all programs

KEYPAD FUNCTI ONS

Select Workout or Insert Fitkey

Copyright c 1998-2010. SCFIT Systems, Inc.

Press to start or choose a program

-

PAUSE/ CLEAR - The [Pause/Clear]
key will pause the workout. Pressing

[Pause/Clear] a second time when in

the pause mode will stop the workout
and return to the main screen.

To restart in the paused mode press
the[Quick Start] key.

Manual

ENTER -

The Enter Key is pressed to
enter selected values for the
workout parameters.

Hills

QUI CK START

“Quick Start” into the Manual mode, or after logging
into a program.The Quick Start key will activate the
selected program.

Random Heart Rate

- This key provides a one-touch

Iso-Strength

More

Profile Selection Area -

Allows the user option to
choose from 12 different
workout profiles

Up Arow a nd Down Arrow - These keys
increase or decrease values of the workout
parameters.

16

SCIFIT • Scientific S olutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCI FI T

BIOMECHANICAL POSITIONING

Swivel or Fixed Seat and Wheelchair Use
Adjust seat or wheelchair forward or backward to a
comfortable location for the upper body movement. A slight
torso rotation is desired on extension. Avoid locking arms
at extension by adjusting the seat position or arm crank
radius. Adjust the height of the cranks to a comfortable
position that encourages proper posture or at the desired
angle for specific training or rehabilitation movements. Such
movements and adjustments should be under the guidance
and supervision of a fitness or medical professional. If
your Pro2 features a seat with height adjustment, you may
adjust either the seat height or the control head to obtain
the desired axis of rotation and body position.

Crank Length Adjustment

Adjust the foot and crank arm radius to desired length. The
longer the crank arm length the larger the circle the user
will experience when exercising. Generally a larger circle
will result in broader muscle recruitment and greater torso
rotation.

Comfort is a key issue and these guidelines may be
helpful.

Users Height:

5’ 6” and under = shortest crank settings
5’ 7” to 5’10” = middle crank settings
5’ 11” and taller = longest crank setting

Important Note: When using this product for medical
or rehabilitation purpose, the crank radius, seat height and
distance should be set by the attending therapist or medical

professional based on the specific needs of the user.

CAUTION

Always follow medical professionals guidelines to
reduce the risk of personal injury. Failure to follow
their directions may result in injury to yourself.

17

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

ADJUSTMENTS

Control Console Adjustment

The control console should be positioned so it is eye
level or in direct line of sight of the user. The control
console can be repositioned by pushing backwards or
pulling forward.

Crank Arm Adjustment

Crank arms can be adjusted to accomodate user
height, achieve proper bio-mechanical positioning and
work different muscle groups.

To adjust crank arm position, pull yellow spring loaded
locking pin out and move crank arm to new position.

Foot Crank Adjustment

Foot crank pedals can be adjusted to accomodate user
height, achieve proper bio-mechanical positioning and
work different muscle groups.

To adjust foot crank position, pull yellow spring loaded
locking pin out and move foot crank to new position.

Reversing Crank Arms

The upper body crank arms can be easily adjusted to
work in unison or in a rotary rowing motion. To take
advantage of this feature, first remove the Allen head
screw and washer from the steel crank rods on the
right side of the unit. The allen keys and instructions
are included in your owners package. This is done one
time only. To reverse the crank,
and slide the crank arm completely out of the Crank
hub. Pull the yellow pin and re-insert the crank arm
carefully in the opposite position. The crank arms will
now be working in unison. It is important to know
that the function can not work in conjunction with the
lower body movement on the PRO2.

Using your SCIFIT PRO2 or PRO1000 in this manner
encourages abdominal and back involvement and
can be used to in the treatment of specific medical
conditions.

pull the yellow pin

18

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

ADJUSTMENTS

Swivel Seat Adjustments

Horizontal Adjustment - The seat can be adjusted in

1” increments and is held in place with a spring
loaded adjustment pin. The seat system is easily
adjusted by pulling up on the T-handle yellow knob
and sliding the seat assembly forward or back.

The seat may also be adjusted forward or back by
pressing on the Foot assist pedal.

Adjust the seat so the arms have a slight bend at
full extension. The feet can be located in the most
comfortable area on the flat surface of the foot rest.

Vertical Adjustment - Pull up on the yellow paddle
shaped handle to raise or lower the seat.
NOTE: No weight should be on the seat when raising.

Swivel Adjustment - Push down on the yellow
paddle shaped handle to rotate the seat. The seat
will lock into place at each 90 degree position.

Pull handle up to
raise or lower seat

Push handle down
to rotate seat

Pull T-Handle up
to move seat
forward and back

Press Foot pedal
to move seat
forward and back

19

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

ACCESSORIES

12V Power Pack - #P1562 (Dom.) #P3733 (Int’l)

To provide continuous power to the display when
equipment is not in operation, plug in the 12V power
pack into the jack located on the lower front side of
monocoque frame.

Low Support Boot - #A3248 (Optional)

Footplate with a lip at the back to keep the feet from

sliding off the pedal. Open at the front and has Vel­cro straps to keep the feet in place. They come with

the crank bars for easy installation and removal.

Order online 24/ 7 at w ww .SCI FI T.com

Tie Downs - #P2506 (Optional)

The tie downs are adjustable straps with clips on
each end. They fix to the wheelchair on the PRO1,
PRO1000 or PRO2 at the front cross tube. The footrest
must be removed to expose the tie down anchors.

High Support Boots - #A2242 (Optional)

A plastic calf high boot which is open at the front and
has Velcro straps to keep the legs in place. They come
with the crank bars for easy installation and removal.

20

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

ACCESSORIES

Glove Assist - #P3981 (OPTIONAL)

For individuals tha have limited strength with fingers
and wrist, the Assist Gloves are available. Fit hand into
glove, wrap glove pad with fingers around crank
handles and secure in place with velcro strips.

Order Online 24/7 at www.SCIFIT.com

21

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

HEART RATE TRANSMITTER STRAP

Uses of the Heart Rate Transmitter Strap

The optional wireless heart rate transmitter accessory
is a useful device if you desire continuous feedback on
your current heart rate during a workout. In addition,
the PRO2 and PRO1000 includes a Heart Rate Control
program which requires use of the strap.

The Heart Rate Control program enables the user to set­up a target heart rate. Through real-time monitoring
of the user’s heart rate, the computer maintains the
user’s heart rate at or below this established target
rate by decreasing the workload if the user’s heart rate
exceeds the target.

Activating & Deactivating Transmitter

Heart Rate Transmitter Straps come in a variety of styles
and manufacturers. To properly activate, secure strap
to the chest, and to deactivate follow the instructions
that come with the Transmitter Strap.

CAUTION

Always follow manufacturers instructions for proper
care and use. Failure to follow manufacturers
instructions may result in injury to yourself.

Calculating Target Heart Rate Zone

Your approximate Maximum Heart Rate (MHR)
is equal to 220 minus your age. The upper limit of
your target zone is equal to 0.85 times your MHR. The
lower limit of your target zone is equal to 0.60 times
your MHR.

For Example:
Your age is 40:
220 - 40 = 180
180 x .85 = 153 (max MHR)
180 x .65 = 108 (min MHR)

These values are based upon averages, always consult
your physician to establish the proper Heart Rate Zone
for your individual health condition.

WARNING

Heart Rate monitoring systems may be inaccurate.
If you feel faint, stop exercising immediately. Over
exercising may result in serious injury or death.

22

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

PROGRAM INSTRUCTIONS

Programs

SCIFIT products have 200 levels of computer controlled
resistance, which ensures that users of all fitness levels
will be able to get a challenging but not overwhelming
workout. Because the resistance is adjustable in .1
increments, it is easy for the user to track progress.
SCIFIT products feature one of the highest resistance
capabilities available on any cardio equipment.

Time 15:00

Level 1.0

Weight 150

SCIFIT products are self generated and have an
extremely low starting resistance. One pedal movement
or crank revolution activates the console and the
screen will remain lit at the most minimal levels of
movement.

SCIFIT products have a battery back up which will
keep the screen lit for a short period after exercise or
if the user stops. This varies between 0 seconds and
5 minutes and can change with the amount of use each
product gets.

If you
after use, an optional wall pack can be plugged in to
accomplish this. This is common in medical settings
and with Fit-Key Programs.

prefer the console to remain lit before and

Manual Workout

Allows the user to set the intensity at any level. This
level will not change unless the user manually increases
or decreases the intensity using the [UP] or [DOWN]
arrow keys.

Adjust level intensity with the

keys, then press

Time 15:00

Level 1.0

Weight 150

Enter user weight with the keys,

then press and begin exercise.

Fit Quik

Press Then

MANUAL

Time 15:00

Level 1.0
Weight 150

Adjust workout time with the keys,

then press

Allows the user to select a two stage program of
cardiovascular work with ISO-strength (Isokinetic)
work loads and duration determined within the
factory set up.

Press Then

Fit-Quik

23

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

PROGRAM INSTRUCTIONS

Fit-Quik Cont’d

The categories displayed will depend on the
workout that is selected in the factory setting. The
following will be seen for the workout choosen.

Manual or Hills

Level 1

Weight 150

Adjust the Level and Weight with the

keys, then press

Constant Workout

Weight 150

Constant Work

Pedal resistance is automatically adjusted to
compensate for any change in pedal speed (RPM),
thus workload (Watts) will remain constant at any
given setting.

Press Then

Time 15:00

Watts 20
Weight 150

Adjust workout time with the

keys, then press

CONSTANT WORK

Adjust the Weight with the

keys, then press

Time 15:00

Watts 20

Weight 150

Adjust target watts with the

keys, then press

Time 15:00

Watts 20

Weight 150

Enter the user weight with the

keys, then press and begin exercise

24

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

PROGRAM INSTRUCTIONS

ISO-Strength Program

ISO-Strength is a isokenitic program, meaning that
the unit will resist your movements in order to force
you to stay at a set speed. This type of strength
workout will not cause excessive soreness because

it is accommodating. The computer will adjust

resistance to keep the user at the target RPM speed.

Time 15:00

RPM 35

Weight 150

Enter user weight with the keys,

Press Then

ISO-STRENGTH

Time 15:00

RPM 35

Weight 150

Adjust workout time with the

keys, then press

Time 15:00

RPM 35

Weight 150

then press and begin exercise

Hills Program

Allows the user to select from seven different Hill
profiles at various pre-programmed intensities.
The following profiles are available:
Hill Course, Sprints, Twin Peaks, Peak,
Progressive, Multi-Peaks and Ramp.

Press Then

Prole Course

Time 15:00
Level 1.0

HILLS

Adjust target RPM with the keys,

then press

Select 1 of 7 profiles with the

keys, then press

25

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

PROGRAM INSTRUCTIONS

Hills Cont’d

Prole Course

Time 15:00

Level 1.0

Adjust workout time with the

keys, then press

Prole Course

Time 15:00

Level 1.0

MORE

Pressing this key will enter the user into the 2nd
of three workout program selection screens. This
screen will show an additional five more
pre-programmed workout profiles.

Press

A new screen will appear with additional programs:
Heart Rate, Stess Test, Random, Power Fit and
Heart Fit.

MORE

Heart Rate Program

The Heart Rate Transmitter Strap is required for this
program. Refer to page 22 for a complete

instruction on using the strap and to understand

how to calculate your Target Heart Rate.

•

Put on Heart Rate Transmitter Strap

Adjust level intensity with the

keys, then press

Time 15:00

Level 1.0

Weight 150

Enter user weight with the keys,

then press and begin exercise

Press Then

HEART RATE

Time 15:00

Heart Rate 120
Weight Rate 150

Adjust the workout time with the

keys, then press

26

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

Heart rate Cont’d

PROGRAM INSTRUCTIONS

Time 15:00

Heart Rate 120

Weight 150

Adjust the target Heart Rate with the

keys, then press

Time 15:00

Heart Rate 120

Weight 150

Enter the user weight with the

keys, then press and begin exercise

First Target 50

Increment 5

Interval 5:00

Select wattage increments after each interval with

the keys, then press

First Target 50
Increment 5

Interval 5:00

Select the length of each interval with the

keys, then press

Stress Test

A designed step test to be used as training
program or use with other diagnostic devices
(if appropriate). The user sets a target wattage
with timed intervals and preset wattage
increments.

First Target 50

Increment 5

Interval 5:00

Weight 150

Enter user weight with the

keys, then press and begin exercise

Increment 5
Interval 5:00

Select target wattage with the

keys, then press

27

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

PROGRAM INSTRUCTIONS

Random Program

The Intelli-Fit console will randomly display
different workout profiles each with its own level of
difficulty. The operator only has to choose the type
of the profile, then select the time length of the
workout and the level difficulty.

Note: The highest column of the profile represents
the workout level you selected. Columns below it
are percentages of the level selected.

Prole Random

Time 15:00

Level 1.0

Adjust level intensity with the

keys, then press

Press Then

RANDOM

Prole Random

Time 15:00
Level 1.0

Select a random profiles with the

keys, then press

Prole Random

Time 15:00

Level 1.0

Time 15:00

Level 1.0

Weight 150

Enter user weight with the keys,

then press and begin exercise

Adjust workout time with the

keys, then press

28

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

PROGRAM INSTRUCTIONS

Power Fit Programs

This key displays two options “Test” and “Training”.
These programs are power and strength indicators
for the user.

Press and the screen will display

a choice of “Test” or “Training” as shown below.

Power Fit

Power Fit

Test

Training

More

Training

Specifically designed preset wattage training
programs based off user Power Fit test evaluation.

Three programs and four levels
(Beginner, Intermediate, Advanced and
Sport Performance) are available.

Press Then

Program 1

Level Beginner
Weight 150

Select 1 of 3 programs with the

keys, then press

TRAINING

Test

This program is based on a pre-programmed
wourkout designed to evaluate your
“Power Drop %”, which gives a fitness indication
of power and strength using wattage as the main
measurement.

Press Then

and begin exercise

TEST

Program 1

Level Beginner

Weight 150

Select 1 of 4 levels with the keys,

then press

Program 1

Level Beginner

Weight 150

Enter user weight with the keys,

then press and begin exercise

29

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

PROGRAM INSTRUCTIONS

Heart Fit Programs (Use Chest Strap)

This key displays two options “Test” and “Training”.
These programs are Heart Rate recovery indicators
for the user.

Press and the screen will display

a choice of “Test” or “Training” as shown below.

Heart Fit

Heart Fit

Test

Training

More

Level Beginner

Weight 150

En t er user w eight with the k eys,

then press and begin ex ercise

Training

Designed training programs based on the user’s
evaluated Heart Fit test. A training schedule with
retesting is recommended. The user has three
programs and four levels: Beginner, Intermediate,
Advanced and Sports Performance to choose from.

Press Then

TRAINING

Test

This program is based on a pre-programmed
workout designed to evaluate your Heart Rate
recovery. The user can select from 1 to 4 levels:
Beginner, Intermediate, Advanced and
Sports Performance.

Press Then

Level Beginner

Weight 150

Sel ect 1 of 4 lev els w i t h the keys,

then press

TEST

Level Beginner

Program 1
Weight 150

Sel ect 1 of 4 lev el w ith th e k eys,

then press

Level Beginner

Program 1

Weight 150

Sel ect 1 of 3 prog r am s w ith the

keys, th en press

30

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

PROGRAM INSTRUCTIONS

Training Cont’d

Level Beginner

Program 1

Weight 150

En t er user w eight with the keys,

then press and begin ex ercise

Additional Key Features

SCIFIT has also included extra user friendly key
features the user may use during a workout.

CHANGE

Allows the user to change the viewing fomat of the
workout profile and data displayed on the LCD
screen during the workout.

VIE

W

If at anytime the user may want to pause during a
workout, this may done by pressing the
[Pause/Clear] key. The screen workout will then
minimize and provide the user three options

1. Continue - Maximizes the workout screen and
continues the workout where the
user had stopped.

2. Change - Returns to a sub-menu where
information may changed that was
previously entered by the user.

3. Stop - Exits the workout and returns to the
main menu.

Note: The console will reset to the main menu after
a short period of time if no selection is made.

FAN

The console contains two 3-speed cooling fans that
can be activated by the user at anytime.

Power
Burst

When activated a count down will display on the
screen for the user to prepare to pedal faster for a
small duration of time. This time duration can be
increased or decreased in the “User Set-up”.

31

SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT

MAI NTENANCE & SERVI CE

Maintenance

The PRO is virtually maintenance free. After training,
always wipe down your SCIFIT exercise product.
Perspiration that continuously settles on the frame,
upholstery, casings, and control console may
eventually cause rust or damage. Damage resulting
from lack of maintenance is not covered under
warranty.

If defective components are identified an

d
require replacement, the equipment should be put
out of service until repaired.

CAUTION

I

n order to maintain a safe level of operation
equipment must be inspected on a routine bas is for
damaged or worn parts
may result in injury to yourself or others.

PRO2/PRO1000 Maintenance Schedule

Any mechanical or electrical work conducted
within the main body of a medical CE class IIa
unit MUST be recalibrated. The generic
maintenance schedule below should be applied
to medical CE and non-medical CE products

COMPONENT USE WHEN BY WHOM

Covers, Seat,Handlebars Damp Cloth Daily Club Maintenance

and Console

. F

ailure to inspect equipment

UNITED STATES CUSTOMER SERVICE

For assistance in the service of SCIFIT products;

phone : [phone] or [phone]
fax : [phone]
e-mail:

service@scifit.com

The Product Support department is staffed from 7:00
AM to 6:00 PM CST Monday through Friday. A voice
mail service is available 24 hours a day for

recording
messages to request technical support and to order
replacement parts. Our mailing address is:

SCIFIT Systems Inc.

,

5151 S. 110th E. Ave.
Tulsa, OK 74146
USA

UK & EUROPEAN CUSTOMER SERVICE

phone : [phone]

fax: [phone]
e-mail: inf

o@scifit.uk.com

SCIFIT LTD (UK)

Lexham House
Forest Road
Bin

field

Berkshire, RG42 4HP
UK

LCD Screen LCD TV Screen Weekly Club Maintenance
soft cleaning cloth

Chains Lightly Applied Monthly Club Maintenance

Chain Lubricant

Company Number: 5970624 (UK)

*COUNTRIES OUTSIDE OF UK & EUROPE

Nuts and Bolts Tighten When Bimonthly Club Maintenance
neccessary

Base Roller Guide Track Damp Cloth Monthly Club Maintenance

PLEASE USE USA CONTACT NUMBERS*

Ord er onli n e 24/ 7 at w w w .S C IFIT.co m

32

SCIFIT • Scientific S olutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCI FI T

WARRANTY

t is very im portant that your

I

online

http://www.SCIFIT.com/warrantyregistration.shtml

at

S CIF IT

mac h ine is regis tere d

regis tration fo r m at the back of this manual

SCIFIT Statement of Warranty

SC IFIT

normal and proper use subject to the following limitations

warranties new products against defective workmanship and/or materials under

a

) S C IFIT’s

(

ithin the United States and Canada both parts and the cost of labor required to

W

replace or repair a defective product for a period of one

purchase date as
been retur

for a period of two
replacement parts or products with any labor costs associated with such
replacement or repair to be at Buyer’s expense
components outside this policy clause

O

labor for a period of three

*

warranty card and if warranty

shipment from factory

obligation to the original purchaser shall apply to

documented by *warranty card and if warranty card has not

ned by user/dealer, then date of shipment from the factory. T

years, such obligation shall extend only to the supply of

(2)

.

utside the United States and Canada replace defective product with no

(3)

years from user purchase date as documented by

card

has not been returned by user then date of

.

*N

ote

riginal purchaser must register their purchased products either by

: O

warranty card return, web site registration or fax to activate warranty period or
shipment date is extant for start of warranty period
be given for warranty registration to allow stock rotation and showroom stock
thereafter none registration will be shipment date for the start of the warranty
period

.

his c a n be done

. T

fill out and mail the

or

.

:

:

(1)

year from

. R

efer to clause (e) for

. A

ninety

(90)

user/dealer

hereafter

day period is to

,

(

(

b

) S C IFIT’s

o allowance shall be granted for repairs made by Buyer without

N

written approval
discretion

c

) S C IFIT’s

to normal and abnormal wear and tear, improper use, corrosion (perspiration
improper maintenance, improper installation, improper rated, grounded or
dedicated electr
part of the product has been altered from its original state by Buyer or a third
party

.

obligation shall be limited to repairing or replacing defective parts

. The

.

warranty does not apply to parts requiring replacement or repair due

ical

decision to replace or repair shall be solely at

circuits or improper storage, nor does it apply where all or

(d) THIS WARR A NTY IS IN LIEU OF ALL OTHE R WARR ANTIES,

EX P R E S S E D OR IMP L IED, ARISING B Y LA W OR OTHE R WIS E
INC L UDING WARR A NTY OR ME RC HANTA B IL ITY OF FITNES S FOR
P A RTICUL A R PURP OS E, AND IS IN LIEU OF AL L OTHER
LIAB ILITIE S OF SC IFIT INC L UDING DIREC T, INDIRE C T, S P EC IA L
AND C ONSE Q UE NTIAL DA MA G E S OR PE NAL TIE S EXP RE S S E D OR
IMPL IED WHETHER ARIS ING OUT OF C ONTRA C T, NEG L IGENC E OR
OTHER S OR T.

33

Solutions for Fi

SCIFIT • Scientific

SCIFIT SCIFIT SCIFIT

Solutions for Fi

tness • SCIFIT • Scientific

SCIFIT’s

SCIF IT’s

tness •

prior

.

),

SCI FI T

WARRANTY

SCIFIT STATEMENT OF WARRANTY

(e) The

determined to be defective

T

rea d mills

readmill belts

T

readmill belts decks

T

T

readmill structure

T

readmill drive system inclusive of

motor

T

readmill Handrails

readmill Heart rate grips

T

T

readmill water bottle holders

readmill trays

T

U

pholstery

S

addles/Seats

Rotary Pedals 12 months

ubber grips

R

eart rate grips

H
R

otary structure

R

ubber footPads

otary water bottle holders

R

otary trays

R

below listed items have the following warranty coverage unless

. T

hes e items include, but are not limited to

– AC 5000

only

&

inverter

90

R

otary Produc ts

models

&

frame

& H

andles

12

W

12

W

arranty Period

12
12

5

3

90

arranty Period

12

months
months

years

5

years

years

months

days

days

months
months

& F

rame

(BioF

) 12

lex

12

12

5

90

90

months

months

years

months

days

days

:

A

c c es s ories

edal straps

P

H

eart Rate Receiver/Transmitter

Low

support boots

H

igh support boots
ssist gloves

A
USB K

(f) F

eys and Lanyards

ires, floods, and acts of God,are not covered under this warranty

P

roduc ts

N

W

arranty Period

ormal wear

90

12

12

90

90

&

days

months
months

days
days

tear

.

34

SCIFIT • Scientific S olutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCI FI T

WARRANTY

reight and Shipping

F

s e r u d e c o r

3 . 2 1

P

e c

SC IFIT

during transit or installation
part for shipping damage at time of delivery or installation, and prior to signing receiving
paperwork
appropriate transit company

is not respons ible for the repair or replacement of any unit or part damaged

customer is responsible for inspection of each unit and

If the customer signs an unqualified reciept for freight or

.

. The

. The

customer is responsible for pursuing all freight damage claims with the

damage goods, the customer is solely responsible for the cost of the repair or
replacement for such freight damage.

M

aintenance

After training, always wipe down your S C IFIT exercise product.

erspiration that continuous ly settles on frame, uphols tery, cas

P

ings

and control panels may eventually cause rust or damage.

D

amage resulting from lack of maintenance will NOT be covered
under warranty. To clean uphols tery, use mild soap and warm
water. Dry with a clean towel. Refer to the Treadmill maintenance
schedule.

P

roduct Support

ssistance for the service of

A

or fax

C

for

O

our

SCIFIT • Scientific S olutions for Fitness • SCIFIT • Scientific Solutions for Fitness •

[phone].

entral Time Monday

recording messages to

ur goal is to return every

normal business hours

lease have the following information prior to calling technical support

P

M
S
P
D

odel number of equipment
erial number of equipment
oint of contact name and phone number
etailed des cription of symptoms encountered

SCIFIT

The

product support department is staffed from

through Friday

request technical support and to order replacement parts

voicemail call within

.

SCIFIT SCIFIT SCIFIT

products is available by calling

voicemail service is available

. A

minutes of when it is placed during

30

.

35

[phone]

7 AM to 5 PM

hours daily

24

:

.

SCI FI T

WARRANTY

I

nstallation

SC IFIT

during installation
damage at the time of installation
claims with the installer

I

f an order includes software, such computer software is transferred by
customer pursuant to a single user license, the royalty, term
set forth on or in the package accompanying such software

K

eyMaster software will receive

eligible for product upgrades for one year following purchase

SC IFIT
T

hes e names must not be used by other entities in the fitness busines s

SC IFIT

copied without prior approval fro

is not responsible for the repair or replacement of any unit or part damaged

. The

customer is responsible for inspection of each unit and part for

. The

.

S

oftware

has trademarked several names to uniquely identify its busines s and products

decals,user’s manuals, and service manuals are copyrighted and may not be

, T

rademarks

1

m

year of call-in technical support and owners will be

SCIF IT.

customer is responsible for pursuing all damage

, C

opyrights, and Patents

SCIFIT to

,

s

and conditions of that are

.

.

.

the

.

SC IFIT

products
features

D
D

next day delivery
requiremen
overnight or 2nd day parts shipping, at customer’s expense
charge the customer’s
ground shipment and overnight or 2nd day

has obtained several patents on features and des igns that are unique to its

. SC IFIT

and des igns in other products

uring the first
etermination must be made before

ts

will defend these patents against those who attempt to utilize these

.

P

arts Shipment

30

days warranty parts will be shipped via overnight delivery

2:00 PM C

. D

uring the remainder of the first year warranty period

will be filled via ground shipment

UP S

account,or

COD

. The

the difference in freight cost between

.

36

.

entral Time on any given weekday for

,

customer is welcome to request

. If

requested

parts

, SC IFIT

will

SCIFIT • Scientific S olutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCI FI T

SCIFIT SCIFIT SCIFIT

WARRANTY

R

eturn of Parts

SC IFIT

meet this commitment, the rapid return of defective parts is essential
of the parts by our engineering department leads to changes that insure the same
problem does not re-occur

W

within
the parts invoice net

is committed to continual improvement in the equipment we market

. T

hank you in advance for your assistance

hen requested by

20

days of receipt of replacement part

SCIFIT,

30

days

defective parts must be returned to the

. O

ther

wise

SCIF IT

.

. In

order to

. The

examination

!

SCIF IT

will expect payment on

factory

Please follow these three easy steps for returning parts.

S

tep

1

K

eep the box and packing material in which the new parts arrived

S

2

tep

W

rap the defective part and place in the box for safe return

moment needed to fill in the return parts form that is enclosed in the box with the new

.

parts

S

3

tep

A UP S

returned
be
will

prepaid Retu rn Label will be in the part box for only those parts that need to be

. W

iss ued for the original parts invoice

NOT be

ALL of

hen

paid until defective parts are returned to the factory

the parts are received and inspected at the factory, a credit will

. A

ttention s ervice companies

. P

.

lease take the brief

-

labor invoices

.

S

ervice Labor

W

here applicable, the

technician to provide field support

48

busines s hours

soon as repair parts are available to the field service technician
will be supplied in advance of the field service technicians so that the product is repaired
with one call

A

ll purchased parts will carry a

installation for more details

T

his Limited Commercial Warranty supercedes the limited commercial warranty printed

I

f you have questions or require additional information, please contact

.

in the

“U

SCIFIT

(8

hours per busines s day) following notification of a problem or as

product support personnel will arrange a local field service

. E

very effort will be made to schedule service during

P

urchased Parts

12

month

warranty

.

sers Operation Manual” for all

Inc. at 1-800-745-1373 or

. W

here possible, parts

. R

efer to Purchased parts shipments and

SCIF IT S

ystems

, Inc.

products

.

SCIF IT S

[e-mail]

ystems

37

,

SCI FI T

SCIFIT • Scientific S olutions for Fitness • SCIFIT • Scientific Solutions for Fitness •

R

SCIFIT

Warranty Card

SCIFIT SCIFIT SCIFIT SCIFIT

or complete this form, fold it and return it to SCIFIT. We request

Register online at

http

://

you send this card within 2 weeks after your equipment has been
delivered to insure proper warranty registration.

Company Name

Contact Name

Address

City/State/Zip

www

.SC IFIT.

com/warrantyregistration.shtml

Email Address

Home Phone (____) Business Phone (_____)

Model Purchased

Date Received Serial Number

Entity Purchased From

City/State

Please rank the following reasons (1 through 6) for selecting SCIFIT with 1
being most important:

____Features____Quality____Price____Dealer___User Friendly___Appearance

Please Check the appropriate box(s) on how you were introduced to SCIFIT:

Saw in ______________________ Magazine

Saw at ____________________ Tradeshow

Other

Comment

Introduced by SCIFIT Dealer

Referred by SCIFIT User

W

arranty

C

ard

Thank You For Choosing

Scientific Solutions For Fitness

TM

www.SCIFIT.com

P2278 Rev. B

Tulsa, OK 74146

SCIFIT

5151 South 110th East Avenue

______________________________
______________________________
From _________________________

Important: Please keep this page for “Recalibration records”

Model Number:

Serial Number:

Date of Purchase:

Calibration Date
(Medical units):

Supplied By: SCIFIT Systems Inc.

User Manual: #P4728A (11/2010)

1st
Recalibration

2nd
Recalibration

3rd
Recalibration

4th
Recalibration

5th
Recalibration

DATE

CLUB OR
CERTIFICATION LOCATION

CERTIFIED SERVICE COMPANY

TECH
INITIALS

Please make extra blank chart copies for future use

5151 South 110th East Avenue

Tulsa, Oklahoma 74146

USA

Sales: 1-800-278-3933 • 1-918-359-2000

Customer Service: 1-800-745-1373

Order online 24/ 7 at w ww .SCI FI T.com