Schwinn 112,113 Parts List, Full Size Hardware Chart, Product Illustration, Assembly Instructions
112/113 Schwinn® Upright Exercise Bike
Parts List
Full Size Hardware Chart
Product Illustration
Assembly Instructions
P/N 001-7243 Rev B 03/26/08
page:1/16
FITNESS SAFEGUARDS AND WARNINGS
Before starting any exercise program, consult with your physician or health
professional. He or she can help establish the correct exercise frequency,
intensity (target heart rate zone) and time appropriate for your particular age and
condition.
The following 3 warnings listed below are also located on the computer console
mast of the exercise bike. Failure to follow any of these safeguards may result in
injury or serious health problems.
Read and understand the Owner’s Manual and operation instructions prior
to use. If you do not have an Owner’s Manual, call 1-800-864-1270 to
obtain one.
If you feel any unusual pain or tightness in your chest, shortness of breath
or dizziness, feel faint or have any discomfort while you exercise, STOP!
Consult your physician.
Keep children and pets away.
Other Important Safeguards and Warnings
Do not exceed maximum user weight of 136 kg (300 lb.)
It is the responsibility of the owner to ensure that all users of this
equipment are adequately informed of all precautions.
Use this equipment only on a solid level surface. Cover the floor or carpet
beneath this equipment for protection.
Read the Warning Label located on the computer console mast.
Do not place fingers or any other objects into moving parts of the exercise
equipment.
This equipment is designed for use by persons aged 13 years and older.
Teenagers should be supervised.
Always wear athletic shoes for foot protection. Avoid wearing loose
clothing that may become entangled in the drive mechanism.
Warn bystanders to keep a safe distance, especially from the moving
pedals. Do not allow anyone to touch the bike while it is in operation.
This equipment is for home use only. Do not use in a commercial,
institutional, or rental setting.
Care should be taken when mounting or dismounting the exercise bicycle.
Do not operate in damp or wet conditions.
Follow proper set-up and guidance as outlined in the Owner’s Manual and
Assembly Instructions. Only use the bike as outlined in usage instructions
of the Owner’s Manual.
Prior to each use inspect the bike for loose, broken, or worn parts. Do not
use if found in this condition. The safety of the equipment can only be
page:2/16
ensured if it is regularly examined and maintained. (See Maintenance
section of the Owner’s Manual)
Refer to the Maintenance section in the Owner’s Manual and disconnect
power supply before servicing the bike.
Replace Warning Label if damaged, illegible, or removed.
We recommend that a minimum distance of 1 meter (39 inches)
surrounding the bike is kept clear of all obstructions, including children,
bystanders, and pets. This is to ensure adequate clearance for easy
access to the bike and to avoid any possible contact with the moving
pedals
112/113 Schwinn Upright Bike Parts List,
Hardware Chart, and Assembly Instructions
Assembly of the 112/113 Upright Bike is divided into 7 easy stages; each
comprised of only a few setup steps. Before proceeding with the assembly,
please read over the easy to follow instructions to familiarize yourself with the
process.
• A flat area of 4’ x 6’ is suggested to assemble and properly use the 112/113
exercise bike.
• You will need the following tools to complete the assembly:
6mm Allen wrench (supplied)
Open wrench 13mm, 14mm, 15mm (supplied)
Phillips screwdriver (supplied)
Also, to ensure quick and easy set up of the 112/113 Upright Bike, please verify
the size and quantity of each of the enclosed assembly hardware. Included is a
handy full size hardware chart and parts list of each of the required assembly
hardware. Simply match up the corresponding hardware to each full size
drawing.
page:3/16
Parts List
Check Quantity Description Reference #
__ 1 Computer 1
__ 1 Handlebar Assembly 2
__ 1 Upper Heart Rate Cable 4
__ 4 Computer Mounting Screws 5
__ 1 Computer/Handlebar Mast 6
__ 4 Curved Washers 7
__ 4 Allen Bolt M8 x P1.25 x 16mm 8
__ 1 Computer Cable (upper) 9
__ 1 Computer Cable (lower) 10
__ 4 Flat Head Screws 8x16L 11
__ 1 Front Stabilizer tube (w/wheels) 12
__ 1pr Pedals 13
__ 1 Main Unit 14
__ 1 Rear Stabilizer Tube 15
__ 1 Seat Post Adjustment Knob 16
__ 1 Seat Post 17
__ 1 Water Bottle 18
__ 2 Screw 5 x 20L 19
__ 1 Bottle Cage 20
__ 1 Seat 21
__ 1 T-Knob 22
__ 1 T-Knob Bushing 23
__ 1 Spring Washer 24
__ 1 Flat Washer 7x12x1T 25
__ 1 Handlebar Clamp 26
__ 1 Front Handlebar Cover 27
__ 1 Rear Handlebar Cover 28
__ 4 Screw M3x14L 29
__ 1 Adjustment Knob 30
__ 1 Power Plug 67
page:4/16
Hardware Chart
Stage#4
23 Bu shi ng712*15MM (1)
24 Spring Washer
Stage#1
Screws M8xP1.25x16mm
25 Flat Washer 1
26 (1)
22 1
Screwdriver 1
(Pedal Wrench)
Stage#5
Allen Key
Screws M3x14mm
Note: Please verify you have all correct parts and quantities before assembling unit.
If you are missing items, are short quantities, or have damaged components,
please contact Schwinn at 1.800.864.1270
Box Spanner 1
page:5/16
Loading...