Schwinn 130, 100335 Owner’s Manual

W

@

Manual÷nEspaNolLaSnoAr_ericano_
http://www_schwinn_itness_cor_ ASSEMBLY MANUAL / OWNER'S MANUAL

Important Safety Instructions - Assembly 3

Safety Warning Labels / Serial Number 4
Specifications 4
Before Assembly 5

Parts 6
Hardware 7
Tools 7

Assembly 8
Leveling the Bike 14
Moving the Bike 14

Important Safety Instructions - Owner's 15
Features 16

Console Features 17
Contact Heart Rate (CHR) 20

Operations 22

Adjustments 22
Initial Setup 22
Quick Start / Manual Program 23

User Profiles 23
Profile Programs 25

Pausing or Stopping 27
Results 27

GOAL TRACK Statistics 28

Console Setup Mode 30
Maintenance 31

Troubleshooting 33
Warranty 35
Sears Customer Warranty 36

To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number

DateofPurchase
To register your product warranty, go to: www.SchwinnFitness.com/register

Or call 1 [phone].

Ifyou have questions or problems with your product, please call 1 (800) NAUTILUS (628-8458)

Or go to: www.SchwinnFitness.com

Nautilus, Inc., (800) NAUTILUS / [phone], www.Nautiluslnc.com - Customer Service: North America [phone],

[e-mail] I outside U.S. +01-360-859-5180, [e-mail] I © 2013 Nautilus, Inc.

_, This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Obeythe following warnings:

_, Read and understand all warnings on this machine.

Carefully read and understand the Assembly instructions.

Keep bystanders and children away from the product you are assembling at all times.
Do not connect power supply to the machine until instructed to do so.

Do not assemble this machine outdoors or in a wet or moist location.
Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.

Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps
involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

Set up this machine on a solid, level, horizontal surface.
Do not try to change the design or functionality of this machine. This could compromise the safety of this machine

and will void the warranty.
If replacement parts are necessary, use only genuine Nautilus®replacement parts and hardware. Failure to use

genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the
warranty.

Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the
Manual.

Read and understand the complete Manual supplied with this machine before first use. Keep the Manual for future
reference.

Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.
This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close

range. Users may come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given
the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical
provider in connection with the use of this equipment. Please consult the "Safety Warning Labels and Serial Number"
section to determine the location of the magnets on this product.

Serial number

Product
specification

• Read, understand and obey all
warnings on this machine.

• Keep children away.

• Not intended for use by anyone

under 14 years of age.

• Prior to use, read and understand
the Owner's Manual.

• Injury or death is possible if
Caution is not used while using this

machine.

• The maximum user weight for this

machine is 300 Ibs (136 kg).

• Replace any "Caution'; "Warning"
or "Danger" label that is illegible,
damaged, or removed.

• The heart rate displayed may be
inaccurate and should be used for

reference only.

Usez et assimilez tous les avertissements
appos6s sur cet appareil.

Gardez les enfants et les animaux de
compagnie 61oign6s de cette machine en
tout tem[_s

DSconselll8 aux enfants _gSs de
moins de 14 ans,

Lisez et familiarisez-vous avec le Manuel
du propri6taire et avec tous les

avertissements avant d'utiliser cette
machine.
Soyez prudent Iorsque vous utilisez cet
6quipement pour ne pasvous infliger de
graves blessures.

L:ette machine supporte un poids
maximal de 3001bs. (136kg).

Remplacez toute 6tiquette
d'aver_issement endommag6e, illisible
ou manquante.

La fr6quence cardiaque qui s'affiche
sur la console peut _tre inexact et
dolt 6tre utilis6e seulement _ titre
indicatif, s00273_A

FCCCompliance

_, Changes or modifications to this unit not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

The machine and power supply comply with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Nete: This machine and power supply have been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:

° Reorient or relocate the receiving antenna.
° Increase the separation between the equipment and receiver.

° Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
° Consult the dealer or an experienced radio/TV technician for help.

MaximumUserWeight: 300 Ibs. (136 kg)

PowerRequirements:

Operational Voltage: 9VDC
Operating Current: 1.5A

RegulatoryApprovals:

ISO 20957
AC Power Adapter: UL listed, Rated 120V 60Hz Input,

9VDC, 1500mA Output. Class 2.

This product, its packaging, and components contain

A

chemicals known to the State of California to cause
cancer, birth defects, or reproductive harm. This Notice

is provided in accordance with California's Proposition

65. If you would like additional information, please refer

to our website at www.nautilus.com/prop65.

55.6" (141cm)

41.3" (105cm)

21.4" (54cm)

BeforeAssembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 90" x 70" (2.3m x 1.8m).

Basic Assembly Tips

Follow these basic points when you assemble your machine:

1. Read and understand the "important Safety Instructions" before assembly.

2. Collect all the pieces necessary for each assembly step.

3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counter-
clockwise) to loosen, unless instructed otherwise.

4. When attaching 2 pieces, gently lift and look through the bolt holes to help insert the bolt through the holes.

5. The assembly can require 2 people.

11

U

15 '_,_

i,i

12 (L)_

Item Qty Description

1 1 Main Frame
2 1 Front Stabilizer
3 1 Rear Stabilizer

4 1 Top Shroud
5 1 Mast Gasket

6 1 Console Mast (with Handlebar Mount)
7 1 Handlebars

8 1 Console

Item Qty Description

9 1 Seat Post

10 1 Adjustment Knob
11 1 Seat

12 1 Left Pedal (L)
13 1 Right Pedal (R)

14 1 Water Bottle Holder
15 1 AC Adapter

16 1 Handlebar Mount Cover

Note: Media Cable is in a bag.

A

E

Item

(}ty

Description

A

C

4

Button Head Hex Screw M8 x 25

B

5

Lock Washer M8

4

Curved Washer M8

D

1

Flat Washer M8

E

1

T-handle

Tools

Included NotIncluded

(recommended)

1. AttachStabilizersto MainFrame

Note: Hardware(*) is pre-installed on the stabilizers and not on Hardware Card. Make sure transport wheels on the

front stabilizer point forward, and the Schwinn ®decal on the rear stabilizer faces outward from the machine.

6mm

!

2,

Install ConsoleMast, Mast Gasketand TopShroudon Main Assembly

NOTICE:Make sure the Console Cable connector (a) does not fall into the Console Mast. Align the clips on the cable

connectors and make sure the connectors lock. Do not crimp Console Cable. Be sure the tabs on the Top
Shroud snap into the Main Assembly.

4

/

/

/

\

3. Install HandlebarsonConsoleMast

NOTICE:Do not crimp the cables. Put the Handlebar (7)in the bracket (6a), adjust the Handlebar to the desired angle,

and install the T-handle (E)through the holes. Use the pull cable in the Handlebar Mount to route the HR
cable (7a)through the slot (6c) under the Handlebar Mount to the top of the mast. Fully tighten the T-handle
to keep the Handlebar in position. Push the cover (16) into position on the Handlebar Mount.

16

6a 6a

6a

\

\

\

\

7a

4. InstallConsoleonConsoleMast

Note: Remove the pre-installed screws(*) from the back of the Console before you connect the cables.

NOTICE:Do not crimp the cables.

8

1I". :':i

i. _ i'1 _

i . ,ll .

.i,r"" j _ l

#2

5.InstallSeatPostonFrame

NOTICE:Make sure the Adjustment Knob engages the Seat Post.

Do not set the Seat Post position higher than the stop mark (STOP) on the tube.

STOP

"\

6. Attach Seat toSeat Post

NOTICE:Be sure the Seat is straight. Tighten the nuts (11b)on the Seat bracket (11a)to hold the Seat in position.

11_ "-.

/

i i

i i

i i

i i

7.InstallPedals

Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation

is based from a seated position on the bike. The Left Pedal has an "L', the Right Pedal an "R".

13(R)

12 ILl