Schwind Esiris Excimerlaser User manual

EXCIMER LASER

ESIRIS

USER MANUAL

Valid for Software Version 2.6.2

SCHWIND eye-tech-solutions GmbH & Co. KG

Mainparkstrasse 6-10

D-63801 Kleinostheim

Copyright  2001-2004 SCHWIND eye-tech-solutions

0483

User Manual

SCHWIND ESIRIS

INTRODUCTION

Dear Customer

Thank you very much for purchasing this medical product and the confidence you have
in our company. You have decided on a sophisticated product, which was manufactured
and tested under strict quality criteria.

Construction and production fully complies with regulations and requirements
which apply to medical products.

Compliance with all effective standards and laws is clearly visible by the CE
symbol, which is displayed on the type label (refer to chapter 3.3 Unit
Labelling). The CE Symbol stands for conformity with current laws and consequently for
security and confidence.

Constant research and development may cause changes in design and scope of supply.
Therefore, in individual cases, the figures in this manual might deviate from the
delivered product.

If you have any questions or desire further information about your equipment, please do
not hesitate to contact us via phone, fax or e-mail. Our team of specialists will be glad
to help you. Our address, phone and fax numbers, as well as the e-mail address can be
found at the beginning of this manual in chapter GENERAL INFORMATION.

Sincerely,

SCHWIND eye-tech-solution GmbH & Co.KG

_________________________________________________________________________________
Version 2.6…. dated 2004-03 draft Page 1 of 139

User Manual

SCHWIND ESIRIS

INTRODUCTION

CONTENT…………………………………………………… ………………………….PAGE

CONTENT ................................................................................................. 2

List of Figures ........................................................................................... 9

GENERAL INFORMATION.......................................................................... 12

System Identification Data ........................................................................ 12

Technical Assistance / Application Support ................................................. 13

Documentation ........................................................................................ 13

Declaration of Manufacturer MPG

[[