Schweigen UM1390-6SEL, UM1390-9SEL Installation Manual
INSTALLATION GUIDE
Endline Isodrive
System 1350
02.2018 / V1.0
www.schweigen.com.au
Welcome
Thank you for purchasing your new Schweigen Endline Isodrive system.
To get the maximum output from the Isodrive 1350 motor, please read through this guide before use and
installation.
This guide contains important information on the correct use and maintenance of the unit, as well as important
safety notes. This will ensure your personal safety and the lasting value of your Isodrive system.
Please always retain your proof of purchase to aid in any warranty queries.
This appliance and its packaging are produced by processes that minimise waste and respect the environment.
Please help us to continue this eort to protect the environment by using the appliance eciently and dispose
of the packaging in a responsible manner.
Page 2
Index
1. Welcome _____________________________________________________________________________________2
2. Your Safety
Receiving your Isodrive Motor ____________________________________________________________________ 4
Before Installation ______________________________________________________________________________ 4
Electrical Cord __________________________________________________________________________________ 4
Motor Features ________________________________________________________________________________ 5
General Notes on Installation and Use ____________________________________________________________ 5
Recommended Installation Distance _____________________________________________________________ 5
Minimum Mounting Height ______________________________________________________________________ 6
Avoidance of Back Flow _________________________________________________________________________ 6
Replacement of Supply Cord _____________________________________________________________________ 6
Why Flexi-duct _________________________________________________________________________________ 6
3. Description
Isodrive Motor - Box Contents ___________________________________________________________________ 7
Dimensions ____________________________________________________________________________________ 7
Installation Overview ___________________________________________________________________________ 8
4. Motor Installation
Wall Installation __________________________________________________________________ 8
Full Housing Assembly - Cross Section ____________________________________________________________ 10
Removable Motor Assembly _________________________________________________________ 11
Wall Aperture Cut Out ______________________________________________________________ 12
Motor Housing to Wall Fitment _______________________________________________________ 12
Front View of Motor Housing (view from behind front grille) _________________________________ 13
Installation using Optional Rear Clamp Assembly _________________________________________ 13
Attaching Optional Fire Ember Mesh Guard (Exploded view) __________________________________ 14
5. Flexible Ducting Installation
Flexible Ducting __________________________________________________________________ 15
Shallow Space ___________________________________________________________________ 15
Important Note __________________________________________________________________ 15
Securing Flexible Duct _____________________________________________________________ 16
6. Parts List
Parts List for Endline Isodrive 1350 Motor _______________________________________________17
7. Maintenance
Cleaning ________________________________________________________________________ 18
8. Specications/Warranty/Disclaimer ________________________________________________________ 18
Page 3
2. Your Safety
RECEIVING YOUR ISODRIVE MOTOR
Please read this section thoroughly before attempting to operate the appliance.
Inspect your product upon receipt. Any damage or defects MUST be reported
within 48 hours, or no claim will be recognised.
DO NOT INSTALL THIS APPLIANCE IF YOU FIND IT DAMAGED.
If this product is installed damaged, the supplier, nor the retailer, will be responsible
for the costs associated with the repair, replacement, removal or re-installation of
the appliances.
This appliance is not intended for use by person/s
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and/
or knowledge. Unless the person has been given
supervision or instruction concerning the use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance, it is not a toy.
Do not install Isodrive motor to a non-Schweigen
and/or non-silent rangehood. If you fail to do so, your
warranty will be voided.
The manufacturer declines all responsibility in case of
failure to adopt proper safety measures.
Ensure that the location in which this appliance is
installed, has good and permanent ventilation.
Please consult local laws and regulations and install
in accordance.
Use an electrical connector with earth that is correct
for your location.
Before Installation
We recommend this appliance to be installed or
repaired by a qualied Schweigen Home Appliances
technician.
Please see our website www.schweigen.com.au
for recommended installers.
It is dangerous to modify any part of this appliance.
Modication of any kind, will immediately void the
warranty.
Electrical Cord
Ensure the supply cord is not exposed to heat,
chemicals or sharp objects. If the supply cord is
damaged, it must be replaced by the manufacturer,
service agent or a similarly qualied person in order
to avoid a hazard. The power supply cord connection
MUST BE installed in such a way that access is easy
in case of emergency.
Check that the voltage in your area corresponds to
the appliance as indicated on the rating label.
Page 4
2. Your Safety
This guide is for the installation of the Isodrive motor
system after the rangehood has been mounted.
(Refer to rangehood installation manual on how to
install the rangehood).
NOTE: All exi ducting measurements are referring to
inside measurements, unless otherwise mentioned.
Motor Features
• IPX4 degree of weather protection.
• Super quiet, long vane, backward curved
centrifugal fan.
• Airow is dependant on installation and the
ducting used. Using single 200mm exi-duct will
3
deliver up to 1350m
than 200mm exi ducting would result in a
loss of airow and it is not recommended.
• Simple installation: Industrial quality motor and
fan made in Germany and rated at 40,000 hours.
• Motor is a high eciency PSC type and rated at
88W costing around the same as two 40W light
globes to run.
• WARRANTY 10 YEARS covers faulty
manufacturing or components. It does not cover
normal wear
and tear.
/hr. The use of a smaller
WARNING: The Endline Isodrive 1350 Motor System
must be installed into an external wall cavity. The
motor can not be installed into an internal wall
cavity or ceiling space where a build up of grease can
occur and become a potential re risk. This will void
warranty.
NOTE: Fan module and dual foil exi-duct are
acoustically matched. Use of semi-rigid or rigid
ducting will result in increased noise and may void
warranty. See installation instruction notes ‘Why exiduct’.
Recommended Ducting
Installation Distance
Schweigen recommends a length of 4 to 6 metres
of exi ducting, with at least 1 to 2 bends for optimal
performance. Any shorter distances may result
in higher airow noise. The maximum ducting
installation length is 10 metres. Check with supplier if
longer duct length is required. Do not reduce
the 200mm exi duct size at any time and avoid
sharp bends.
General Notes on Installation
and Use
This fan unit is designed to be installed using 200mm
exi ducting.
This fan is suitable for connection to ducting runs
2
with a minimum inlet area of 17,000mm
up to 10m maximum (check with supplier if longer
duct length required). Where possible exible ducting
must be extended suciently to present a smooth
air passage with bends of at least the radii of twice
the diameter of the duct. Excessive bends in the
ducting will compromised extraction.
and length
Page 5
2. Your Safety
Minimum Mounting Height
This fan unit is intended for mounting at a minimum
height of 2.1 metres (measured to the lower part of
the fan impeller) above a oor or the ground.
Avoidance of Back Flow
Care should be taken to avoid the back ow of gases
into the room from the open ue of gas or other open
re appliances.
Replacement of supply cord
If the supply cord is damaged, it must be replaced by
a service agent or suitably qualied person in order to
avoid a hazard.
NOTE: Do not use with a timer.
Why Flexi-duct?
Some internet sites strongly recommend the
use of rigid ducting over fully exible ducting.
This may well be the case with conventional
rangehoods with internal motors but not with
external motor rangehood.
Schweigen’s unique Isodrive system works in the
opposite way to conventional rangehoods, pulling air
through the hood and acoustically matched ducting,
producing almost silent high volume ow. The use
of a complete rigid or semi-rigid ducting system will
allow an organ piping eect to occur; like a didgeridoo
where a noise is produced at one end of a hollow rigid
pipe and the noise is amplied out the other.
The Isodrive system drives the noise outside the
house.
WARNING:
Installation without the use of at least the minimum
recommended length of acoustically matched
exi-ducting in the system will void performance
expectations. Any installation problem must be
reported to Schweigen. Call outs relating to incorrect
installation will result in a service fee direct to the
customer. Schweigen takes no responsibility for
problems caused by faulty installation, this may void
warranty.
Page 6
A preferred installer list can be obtained from
Schweigen website www.schweigen.com.au or
by calling 1300 881 693.
Loading...