SCHURTER EC11 Technical data
EECC111
1
POWER ENTRY MODULES WITHOUT LINE FILTER
C20
70° C
DDeessccrriippttiioon
- Panel mount:
Screw-on version from front or rear side, snap-in version from front
side
- 2 Functions:
Connector Protection class I, Line switch 2-pole
- Quick connect terminals 6.3 x 0.8 mm
- Alternative: version with line filter EC12
n
Actual information about approvals can be found on
illuminated version
CChhaarraacctteerriissttiiccs
- All single elements are already wired
Unwired versions available on request
- Line switch non-illuminated or illuminated
- Ideal for application with high transient loads
- Qualified for use in equipment according IEC/EN 60950
OOtthheerr vveerrssiioonnss oonn rreeqquueesstt:
- unwired versions
- line switch with other rocker marking
- for protection class II
s
:
http://www.schurter.com/approvals
TTeecchhnniiccaall ddaatta
Ratings IEC 16 A / 250 VAC; 50 Hz
Ratings UL/CSA 20 A / 250 VAC; 60 Hz
Dielectric strength
Allowable operation temp. -25 °C to 70 °C
Degree of protection from front side IP40 acc. to IEC 60529
Protection class Suitable for appliances with protection
Terminals Quick connect terminals 6.3 x 0.8 mm
Panel thickness s
Materials: Housing Thermoplastic, black, UL 94V-0
a
> 2.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
class I acc. to IEC 61140
Screw-on: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1.5/2/2.5 mm
Appliance-inlet /-outlet
Line switch Rocker switch 2-pole, non-illuminated
C20 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
condition) pin-temperature 70 °C, 16 A,
Protection class I
or illuminated red or green, acc. to IEC
61058-1
Technical details GENERAL PRO-
DUCT INFORMATION
1
www
.schurter
.com
EECC111
R
2
.6
45.7
- 0.10
+
0.05
11.95
± 0.08
3
1.7
-
0.08
+ 0.05
c
a. 52
23.85
4.8
0
.8
26.6
2
.3
± 0.05
31.6
32.2
-
0.10
+
0.05
R
2.8
12.2
± 0.08
46.2
-
0.10
+ 0.05
Ø 6.4
Ø
3.3
± 0.05
5 57
- 0.15
+ 0.05
36
R
6
67
10.4
± 0
.0
5
R
± 0.05
46.5
± 0.10
3
2.5
± 0.10
5.25
± 0.05
57
± 0.10
Ø
3.6
S
R
4.7
2.95
R
2.95
R
2.6
45.7
-0.10
+
0.05
11.95
0.08
31.7
-
0.08
+0.05
2.15
ca. 52
S 0.05
23.85
4.826.6
2.3
± 0.05
3
1.6
32.2
-0.10
+0.05
R
2.8
12.2
0.08
46.2
-0.10
+0.05
36
50
-0.10
+0.05
R
4.7
1.9
0.05
46.5
-0.10
+
0.05
32.5
-0.10
+
0.05
± 0.05
R
2.95
R
2.95
±
±
1
POWER ENTRY MODULES WITHOUT LINE FILTER
DDiimmeennssiioonns
s
Screw-on mounting
Snap-in mounting
DDiiaaggrraamms
s
Line switch non-illuminated
1) Line
2) Load
2
www
.schurter
.com
Line switch illuminated
1) Line
2) Load
Loading...