SCHURTER C14 Technical data

DDCC111
1
POWER ENTRY MODULES WITHOUT LINE FILTER
C14
70° C
DDeessccrriippttiioon
- Panel mount: Screw-on version from front or rear side, snap-in version from front side
- 2 Functions: Connector Protection class I, Line switch 1- or 2-pole
- Quick connect terminals 4.8 x 0.8 mm
- Alternative: version with line filter DC12
- Substitute for type KEB1; KEB2
n
CChhaarraacctteerriissttiiccs
- Ultra-compact design
- All single elements are already wired Unwired versions available on request
- Line switch non-illuminated or illuminated
- Ideal for application with high transient loads
- Qualified for use in equipment according IEC/EN 60950
OOtthheerr vveerrssiioonnss oonn rreeqquueesstt:
- snap-in, panel thickness 1 and 3 mm
- unwired versions
- solder terminals
- line switch with other rocker marking
- line switch 1-pole
- for protection class II
s
:
http://www.schurter.com/approvals
TTeecchhnniiccaall ddaatta
Ratings IEC 10 A / 250 VAC; 50 Hz Ratings UL/CSA 12 A / 250 VAC; 50/60 Hz Dielectric strength
Allowable operation temp. -25 °C to 70 °C Degree of protection from front side IP40 acc. to IEC 60529
otection class
Pr
erminals
T Panel thickness s
Materials: Housing Thermoplastic, black, UL 94V-2
DDiimmeennssiioonns
Screw-on mounting
a
> 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz)
Suitable for appliances with pr class I acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm
ew-on: max 6 mm
Scr Mounting scr Snap-in: 1/1.5/2/2.5/3 mm
ew torque max 0.5 Nm
otection
s
Appliance-inlet /-outlet
Line switch Rocker switch 1- or 2-pole, non-illumi-
C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold condition) pin-temperature 70 °C, 10 A,
otection class I
Pr
nated or illuminated red or green, acc. to IEC 61058-1 Technical details GENERAL PRO-
DUCT INFORMATION
1
www
.schurter
.com
1
DDCC111
Snap-in mounting
POWER ENTRY MODULES WITHOUT LINE FILTER
DDiiaaggrraamms
1) Line
2) Load
VVaarriiaanntts
with internal connections
OOrrddeerr NNuummbbeerr PPaanneell mmoouunnttiinngg PPaanneell tthhiicckknneessss ss
DC11.0021.201 Snap-in 1.5 2-pole DC11.0021.301 Snap-in 2 2-pole DC11.0021.401 Snap-in 2.5 2-pole DC11.0031.201 Snap-in 1.5 2-pole DC11.0031.301 Snap-in 2 2-pole DC11.0031.401 Snap-in 2.5 2-pole DC11.0001.203 Snap-in 1.5 1-pole DC11.0001.303 Snap-in 2 1-pole DC11.0001.403 Snap-in 2.5 1-pole DC11.0001.201 Snap-in 1.5 2-pole DC11.0001.301 Snap-in 2 2-pole DC11.0001.401 Snap-in 2.5 2-pole DC11.0021.001 Screw-on 2-pole DC11.0031.001 Screw-on 2-pole DC11.0001.003 Screw-on 1-pole DC11.0001.001 Screw-on 2-pole
s
Line switch non-illuminated 2-pole
s
Line switch illuminated 2-pole
1) Line
2) Load
LLiinnee sswwiittcchh IIlllluummiinnaattiioonn CCoolloorr
[[mmmm]]
Line switch non-illuminated 1-pole
1) Line
2) Load
l l l l l l
l l
red red red green green green
red green
PPaacckkaaggiinngg uunniitt
2
www
.schurter
.com
50
Pcs
AAcccceessssoorriiees
s
ACCESSORIES
Loading...