« INDEX BY TYPES
POWER ENTRY MODULES WITHOUT LINE FILTER
6622000
0
Types 6200, 6205
1-pole
Type 6202: for protection class II
Types 6200, 6205
1-pole
C14
70° C
DDeessccrriippttiioon
- Panel mount:
Screw-on version from front or rear side, snap-in version from front
side
- 2 Functions:
Connector Protection class I, Fuseholder for fuse-links 5 x 20 mm 1pole
- Solder terminals or quick connect terminals
- Alternative: version with line filter » 5200
n
Actual information about approvals can be found on
CChhaarraacctteerriissttiiccs
- All single elements are already wired
- Plug removal necessary for fuse-link replacement
The fuseholder is accessible from the equipment front
With spare fuse compartment
- Qualified for use in equipment according IEC/EN 60950
OOtthheerr vveerrssiioonnss oonn rreeqquueesstt:
- Types for rivet mounting available upon request
s
:
http://www
.schurter.com/approvals
TTeecchhnniiccaall ddaatta
Ratings IEC 10 A / 250 VAC; 50 Hz
Ratings UL/CSA 10 A / 250 VAC; 60 Hz
Dielectric strength
Allowable operation temp. -25 °C to 70 °C
Degree of protection from front side IP40 acc. to IEC 60529
Protection class Suitable for appliances with protection
Terminals Solder terminals or quick connect termi-
Panel thickness s
Materials: Housing Thermoplastic, black, UL 94V-0
DDiimmeennssiioonns
a
> 2 kVAC between L-N
> 2 kVAC between L/N-PE
(1 min/50 Hz)
class I acc. to IEC 61140
nals , tin-plated
Screw-on: max 6 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1/1.5/2/2.5/3 mm
s
Screw-on mounting types 6200/02/05
Appliance-inlet /-outlet
Fuseholder 1-pole, Shocksave category PC2 acc.
Rated power acceptance @ Ta
23 °C
Power acceptance @ Ta >
23°C
p-in mounting types 6200/02/05
Sna
C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
condition) pin-temperature 70 °C, 10 A,
Protection class I
to IEC/EN 60127-6,
for fuse-links 5 x 20 mm
5 x 20: 2 W (1-pole)
Admissible power acceptance at higher
ambient temperature see derating curves. Take note of the information »GE-
NERAL PRODUCT INFORMATION
solder terminals 20.5 mm
E:
quick-connect terminals 23.5 mm
E:
solder terminals 22.5 mm
E:
quick-connect terminals 25.5 mm
E:
1.0/1.5/2.0/2.5/3.0 mm
S:
« INDEX BY TYPES
POWER ENTRY MODULES WITHOUT LINE FILTER
6622000
0
DDiiaaggrraamms
s
6200/05
DDeerraattiinngg ccuurrvvees
tance in Watt
Admissible power accep-
VVaarriiaanntts
Socket and fuse drawer have to be ordered separately (see accessory)
OOrrddeerr NNuummbbeerr PPrrootteeccttiioonn ccllaassss PPaanneell mmoouunnttiinngg PPaanneell tthhiicckknneessss ss
6200.4210 I Snap-in 1 1-pole Quick connect terminals 4.8 x 0.8 mm
6200.4215 I Snap-in 1.5 1-pole Quick connect terminals 4.8 x 0.8 mm
6200.4220 I Snap-in 2 1-pole Quick connect terminals 4.8 x 0.8 mm
6200.4225 I Snap-in 2.5 1-pole Quick connect terminals 4.8 x 0.8 mm
6200.4230 I Snap-in 3 1-pole Quick connect terminals 4.8 x 0.8 mm
6200.4310 I Snap-in 1 1-pole Quick connect terminals 6.3 x 0.8 mm
6200.4315 I Snap-in 1.5 1-pole Quick connect terminals 6.3 x 0.8 mm
6200.4320 I Snap-in 2 1-pole Quick connect terminals 6.3 x 0.8 mm
6200.4325 I Snap-in 2.5 1-pole Quick connect terminals 6.3 x 0.8 mm
6200.4330 I Snap-in 3 1-pole Quick connect terminals 6.3 x 0.8 mm
6200.4110 I Snap-in 1 1-pole Solder terminals 3.8 x 0.8 mm
6200.4115 I Snap-in 1.5 1-pole Solder terminals 3.8 x 0.8 mm
6200.4120 I Sna
6200.4125 I Snap-in 2.5 1-pole Solder terminals 3.8 x 0.8 mm
6200.4130 I Snap-in 3 1-pole Solder terminals 3.8 x 0.8 mm
6200.2200 I Screw-on 1-pole Quick connect terminals 4.8 x 0.8 mm
6200.2300 I Screw-on 1-pole Quick connect terminals 6.3 x 0.8 mm
6200.2100 I Screw-on 1-pole Solder terminals 3.8 x 0.8 mm
s
1-pole
Ambient air temperature Ta °C
s
2-pole
tance in Watt per pole
Admissible power accep-
Ambient air temperature Ta °C
p-in
FFuusseehhoollddeerr TTeerrmmiinnaallss iinntteerrnnaall wwiirreedd
[[mmmm]]
2 1-pole Solder terminals 3.8 x 0.8 mm
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
PPaacckkaaggiinngg uunniitt
50 Pcs
AAcccceessssoorriiees
s
» ACCESSORIES