SCHURTER 6200 Technical data
6622000
max. R3
M3
30.5
27.5
36
±0.1
+0.2
0
+0.2
0
3.5
2.5
44
36
E
5
34
6.3x90˚
max. R3
31.5
27.5
±0.1
+0.2
0
+0.2
0
S
30
E
3
34
0
POWER ENTRY MODULES WITHOUT LINE FILTER
Types 6200, 6205
1-pole
Types 6200, 6205
1-pole
Type 6202: for protection class II
C14
70° C
DDeessccrriibbttiioon
- Panel Mount:
Screw-on version from front or rear side, snap-in version from front
side
- 2 Functions:
Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm 1-pole
- Solder terminals or quick connect terminals
- Alternative: version with line filter 5200
n
CChhaarraacctteerriissttiiccs
s
- All single elements are already wired
- Plug removal necessary for fuse-link replacement
The fuseholder is accessible from the equipment front
With spare fuse compartment
- Qualified for use in equipment according IEC/EN 60950
OOtthheerr vveerrssiioonnss oonn rreeqquueesst
t
- Types for rivet mounting available upon request
TTeecchhnniiccaall DDaatta
a
Ratings IEC 10 A / 250 VAC; 50 Hz
Ratings UL/CSA 10 A / 250 VAC; 60 Hz
Dielectric Strength > 2 kVAC between L-N
> 2 kVAC between L/N-PE
(1 min/50 Hz)
Allowable operation temp. -25 °C to 70 °C
Degree of Protection from front side IP 40 acc. to IEC 60529
Protection Class Suitable for appliances with protection
class I acc. to IEC 61140
Terminals Solder terminals or quick connect termi-
nals , tin-plated
Panel Thickness s Screw-on: max 6 mm
Mounting screw torque max 0.5 Nm
Snap-In: 1/1.5/2/2.5/3 mm
Material: Housing Thermoplastic, Black, UL 94V-0
DDiimmeennssiioonns
s
Screw-on mounting types 6200/02/05
Appliance-inlet /-outlet C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold condition) pin-temperature 70 °C, 10 A, Protection class I
Fuseholder 1-pole, Shocksafe category PC2 acc. to
IEC 60127-6,
for fuse-links 5 x 20 mm
Rated Power Acceptance @ Ta
5 x 20: 2 W (1-pole)
23 °C
Power acceptance @ Ta > 23°C Admissible power acceptance at higher
ambient temperature see derating curves.
Take note of the information POWER
ENTRY MODULES WITHOUT LINE FIL-
TER
Snap-in mounting types 6200/02/05
E: solder terminals<TAB/><TAB/>20.5 mm
E: quick-connect terminals<TAB/>23.5 mm
1
www.schurter.com
E: solder terminals<TAB/><TAB/>22.5 mm
E: quick-connect terminals<TAB/>25.5 mm
S: 1.0/1.5/2.0/2.5/3.0 mm
6622000
0
POWER ENTRY MODULES WITHOUT LINE FILTER
DDiiaaggrraamms
s
6200/05
DDeerraattiinngg ccuurrvvees
tance in Watt
Admissible power accep-
VVaarriiaanntts
Socket and fuse-carrier
OOrrddeerr NNuummbbeerr PPrrootteeccttiioonn CCllaassss PPaanneell mmoouunnttiinngg PPaanneell TThhiicckknneessss ss
6200.4210 I Snap-In 1 1-pole Quick connect terminals 4.8 x 0.8 mm
6200.4215 I Snap-In 1.5 1-pole Quick connect terminals 4.8 x 0.8 mm
6200.4220 I Snap-In 2 1-pole Quick connect terminals 4.8 x 0.8 mm
6200.4225 I Snap-In 2.5 1-pole Quick connect terminals 4.8 x 0.8 mm
6200.4230 I Snap-In 3 1-pole Quick connect terminals 4.8 x 0.8 mm
6200.4310 I Snap-In 1 1-pole Quick connect terminals 6.3 x 0.8 mm
6200.4315 I Snap-In 1.5 1-pole Quick connect terminals 6.3 x 0.8 mm
6200.4320 I Snap-In 2 1-pole Quick connect terminals 6.3 x 0.8 mm
6200.4325 I Snap-In 2.5 1-pole Quick connect terminals 6.3 x 0.8 mm
6200.4330 I Snap-In 3 1-pole Quick connect terminals 6.3 x 0.8 mm
6200.4110 I Sna
6200.4115 I Snap-In 1.5 1-pole Solder terminals 3.8 x 0.8 mm
6200.4120 I Snap-In 2 1-pole Solder terminals 3.8 x 0.8 mm
6200.4125 I Snap-In 2.5 1-pole Solder terminals 3.8 x 0.8 mm
6200.4130 I Snap-In 3 1-pole Solder terminals 3.8 x 0.8 mm
6200.2200 I Screw-on 1-pole Quick connect terminals 4.8 x 0.8 mm
6200.2300 I Screw-on 1-pole Quick connect terminals 6.3 x 0.8 mm
6200.2100 I Screw-on 1-pole Solder terminals 3.8 x 0.8 mm
s
1-pole
Ambient air temperature Ta °C
s
2-pole
tance in Watt per pole
Admissible power accep-
Ambient air temperature Ta °C
p-In
FFuusseehhoollddeerr TTeerrmmiinnaallss iinntteerrnnaall wwiirreedd
[[mmmm]]
1 1-pole Solder terminals 3.8 x 0.8 mm
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
PPaacckkaaggiinngg uunniitt
2
www.schurter.com
50 Pcs
Loading...