Schumacher SI4 Owner's Manual
Model / Modelo:
SI4
OWNERS MANUAL
MANUAL DEL USUARIO
Mobile Power
100W Remote Power Converter
Energía Movíl
100W Convertidor de Energía Remota
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE.
This manual will explain how to use the converter safely and effectively. Please
read and follow these instructions and precautions carefully.
POR FAVOR CONSERVE ESTE MANUAL DEL USUARIO Y LEALO ANTES
DE CADA USO. En este manual le explica cómo utilizar el conversor de manera
segura y conable. Por favor, lea y siga las siguientes instrucciones y precauciones.
0099001603-00
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .................................................................. 3
FEATURES ............................................................................................................... 4
BEFORE USING YOUR CONVERTER ....................................................................4
OPERATING INSTRUCTIONS ................................................................................. 6
POWER SOURCE .................................................................................................... 6
HOW POWER CONVERTERS WORK .................................................................... 7
LED INDICATOR AND SHUTDOWN PROTECTION ............................................... 7
IF THE CONVERTER’S FUSE BLOWS ................................................................... 7
TROUBLESHOOTING .............................................................................................. 8
SPECIFICATIONS .................................................................................................... 8
REPLACEMENT PARTS .......................................................................................... 9
BEFORE RETURNING FOR REPAIRS.................................................................... 9
LIMITED WARRANTY .............................................................................................. 9
WARRANTY CARD ................................................................................................ 19
CONTENIDOS
INSTRUCCIONES IMPORTANTES DE SEGURIDAD ........................................... 11
CARACTERÍSTICAS .............................................................................................. 12
ANTES DE USAR SU CONVERTIDOR ................................................................ 12
INSTRUCCIONES DE OPERACIÓN ..................................................................... 14
FUENTE DE ENERGÍA .......................................................................................... 14
CÓMO FUNCIONAN LOS CONVERTIDORES DE CORRIENTE..........................15
INDICADOR LED Y PROTECCIÓN DE APAGADO ............................................... 15
SI SE QUEMA EL FUSIBLE DEL CONVERTIDOR ................................................ 15
RESOLUCIÓN DE PROBLEMAS ........................................................................... 16
ESPECIFICACIONES ............................................................................................. 16
PIEZAS DE REPUESTO ........................................................................................ 17
ANTES DE DEVOLVER A REPARACIONES ......................................................... 17
GARANTÍA LIMITADA ............................................................................................17
TARJETA DE GARANTÍA .......................................................................................20
1. IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS.
1.1 SAVE THESE INSTRUCTIONS. This manual will show you how to use your converter
safely and effectively. Please read, understand and follow these instructions and
precautions carefully, as this manual contains important safety and operating instructions.
WARNING: The converter output is 120V AC and can shock or electrocute the
same as any ordinary household AC wall outlet.
WARNING: Pursuant to California Proposition 65, this product contains chemicals
known to the state of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
1.2 Do not cover or obstruct the converter’s vents.
1.3 Use the converter in a well-ventilated area.
1.4 This converter is not intended for use by children.
1.5 Do not expose the converter to rain or snow.
1.6 Use only accessories recommended or sold by the manufacturer.
1.7 Do not operate the converter with damaged or undersized wiring.
1.8 Do not operate the converter if it has received a sharp blow, been dropped or
otherwise damaged in any way; take it to a qualied service person.
1.9 Do not disassemble the converter; take it to a qualied service person when service
or repair is required. Incorrect reassembly may result in a risk of re or electric shock.
1.10 Make sure the converter is not close to any potential source of ammable fumes,
gases or clothing.
1.11 Do not place the converter in areas, such as battery compartments or engine
compartments, where fumes or gases may accumulate.
1.12 Disconnect both AC and DC power from the converter before attempting any cleaning.
1.13 DO NOT operate the converter if you, the converter, the device being operated or any
other surfaces that may come into contact with any power source are wet. Water and
many other liquids can conduct electricity, which may lead to serious injury or death.
1.14 Do not place the converter in direct sunlight. The ideal air temperature for operation
is between 50° and 80°F.
1.15 Only connect the power converter to a 12 volt accessory outlet.
1.16 Do not attempt to connect the converter to any other power source, including an
AC power source.
1.17 Do not modify the AC or USB receptacles in any way.
1.18 Incorrect operation of your converter may result in damage and personal injury.
1.19 This device does not include an internal Ground Fault Circuit Interrupter (GFCI).
For GFCI protection, use a Coleman Cable 02822 GFCI outlet.
• 3 •
2. FEATURES
2
1
1. 12V accessory plug
2. LED Indicators
3. USB ports
4. AC receptacle
4
5. Strap for mounting
3
5
3. BEFORE USING YOUR CONVERTER
Do not use the converter with a product that draws a higher wattage than the
converter can provide, as this may cause damage to the converter and product.
When you turn on a device or a tool that runs on a motor, the device goes through
two stages:
1. Start Up – Requiring an initial surge of power (commonly known as the
“starting” or “peak” load).
2. Continuous Operation – Power consumption drops (commonly known as the
“continuous load”).
The wattage (WATTS) or amperes (AMPS) can normally be found stamped or
printed on most devices and equipment, or in the user’s manual. Otherwise,
contact the manufacturer to nd out whether the device you want to use is
compatible with a modied sine wave.
To calculate the wattage: Wattage = AMPS x 120 (AC Voltage).
To calculate the starting load: Starting Load = 2 x wattage.
In general, the startup load of the device or power tool determines whether your
converter has the capability to power it.
Always run a test to establish whether the converter will operate a particular piece of
equipment or device. In the event of a power overload, the converter is designed to
automatically shut down.
This safety feature prevents damaging the converter while testing devices and
equipment within the wattage range of the converter.
• 4 •
IMPORTANT: This converter uses a modied sine waveform (diagram A) which is not
quite the same as power company electricity (diagram B). For the following devices, we
strongly recommend that you use caution and check the device’s manual to make sure
it is compatible with modied sine waveform.
1. Switch mode power supplies
2. Linear power supplies
3. Class 2 transformers
4. Line lter capacitors
5. Shaded pole motors
6. Fan motors
7. Microwave ovens
8. Fluorescent and high intensity lamps (with a ballast)
9. Transformer less battery chargers
Using the converter with any of these devices may cause the device to run warmer
or overheat.
Diagram A Diagram B
Modied sine waveform
produced by converter
Pure sine waveform
typical of home AC outlet
IMPORTANT: If you are using the power converter to operate a battery
charger, monitor the temperature of the battery charger for about 10
minutes. If the battery charger becomes abnormally warm, disconnect it
from the converter immediately.
NOTE: You may hear a “buzzing” sound being emitted from inexpensive sound
systems when operated with the converter. This is due to ineffective lters in the
sound system’s power supply. Unfortunately, this problem can only be resolved by
purchasing a sound system with a higher quality power supply or higher quality lter.
• 5 •
4. OPERATING INSTRUCTIONS
CONNECTING THE CONVERTER
IMPORTANT: Make sure you connect your converter only to a 12V power supply
(ordinarily an automotive battery).
1. Remove the protective cover from the accessory outlet in the vehicle
passenger compartment.
2. Push the 12 volt power plug rmly into the outlet.
ATTENTION: Failure to make the correct connections will result in blown fuses and
permanent damage to the converter.
3. The LED indicator lights should glow GREEN, verifying the converter is
receiving power.
4. Make sure the device to be operated is turned OFF.
5. Plug the device into the converter’s AC outlet or USB port.
6. Turn the device on.
7. To disconnect, reverse the above procedure.
NOTE: If more than one device is to be powered, start one device at a time, to avoid a
power surge and overloading the converter. The surge load of each device should not
exceed the converter’s Continuous Operation wattage rate.
5. POWER SOURCE
Your average automobile or marine battery at full charge will provide an ample
power supply to the converter for approximately 2 hours when the engine is off.
The actual length of time the converter will function depends on the age and
condition of the battery and the power demand being placed by the device being
operated with the converter.
Before starting the engine after using the converter with the engine off, turn OFF the
device plugged into the converter and disconnect the converter plug from the 12 volt
accessory outlet. To maintain battery power, start the engine every 1 to 2 hours and
let it run for approximately 10 minutes to recharge the battery.
Although it is not necessary to disconnect the converter when turning over the
engine, it may briey cease to operate as the battery voltage decreases. While the
converter draws very low amperage when not in use, unplug it to avoid battery drain.
• 6 •
Loading...