Schumacher INSTANT POWER XP400W,INSTANT POWER XP600,INSTANT POWER XP750W Owner's Manual
0099001407-00
OWNERS MANUAL / MANUAL DEL USUARIO
Models / Modelos: XP400W, XP600, XP750W
INSTANT POWER™
Jump Starter and DC Power Source
Arrancador y Fuente de Poder de CC
PLEASE SAVE THIS OWNER’S MANUAL AND READ BEFORE EACH USE.
This manual will explain how to use the Instant Power safely and effectively.
Please read and follow these instructions and precautions carefully.
POR FAVOR GUARDE ESTE MANUAL DEL PROPIETARIO Y LEER ANTES DE CADA USO.
En este manual se explica cómo utilizar el Instant Power segura y efectiva.
Por favor, lea y siga las siguientes instrucciones y precauciones.
XP400W
XP750W
XP600
THIS UNIT CONTAINS A SEALED, NON-SPILLABLE LEAD-ACID
BATTERY. MUST BE DISPOSED OF PROPERLY.
ESTA UNIDAD CONTIENE UNA BATERÍA SELLADA DE ÁCIDO-PLOMO
NO DERRAMABLE QUE DEBE DESECHARSE APROPIADAMENTE.
WARNING: Possible explosion hazard. Contact with battery acid may
cause severe burns and blindness. Keep out of reach of children.
ADVERTENCIA: Posible Riesgo de una explosión. El contacto con una batería de ácido
puede causar quemaduras y ceguera. Manténgase alejado de los niños.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ........................................................................3
PERSONAL SAFETY PRECAUTIONS...........................................................................3
FEATURES ..................................................................................................................... 4
CHARGING THE INTERNAL BATTERY OF THE INSTANT POWER ............................4
USING THE INSTANT POWER ......................................................................................5
MAINTENANCE AND CARE .......................................................................................... 6
TROUBLESHOOTING .................................................................................................... 7
BEFORE RETURNING FOR REPAIRS ..........................................................................7
SPECIFICATIONS ..........................................................................................................8
REPLACEMENT PARTS/ACCESSORIES .....................................................................8
LIMITED WARRANTY ....................................................................................................8
WARRANTY CARD / TARJETA DE GARANTÍA ........................................................... 15
CONTENIDOS
INSTRUCCIONES IMPORTANTES DE SEGURIDAD ...................................................9
PRECAUCIONES DE SEGURIDAD PERSONAL ..........................................................9
CARACTERÍSTICAS ....................................................................................................10
PARA CARGAR LA BATERIA INTERNA DE LA FUENTE DEL INSTANT POWER .....10
CÓMO UTILIZAR EL INSTANT POWER ...................................................................... 11
MANTENIMIENTO Y CUIDADO ................................................................................... 12
LOCALIZACIÓN Y SOLUCIÓN DE PROBLEMAS .......................................................13
ANTES DE DEVOLVER A REPARACIONES ...............................................................13
ESPECIFICACIONES ................................................................................................... 14
REPUESTOS/ACCESORIOS ....................................................................................... 14
GARANTÍA LIMITADA ...................................................................................................14
WARRANTY CARD / TARJETA DE GARANTÍA ........................................................... 15
• 3 •
IMPORTANT SAFETY INSTRUCTIONS
WARNING – RISK OF EXPLOSIVE GASES
WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS.
BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL OPERATION.
IT IS IMPORTANT THAT YOU FOLLOW THESE INSTRUCTIONS EACH TIME
YOU USE THE INSTANT POWER.
To reduce the risk of battery explosion, follow these instructions and those published by
the battery manufacturer and the manufacturer of any equipment you intend to use in the
vicinity of a battery. Review cautionary marking on these products and on the engine.
WARNING: Pursuant to California Proposition
65, this product contains chemicals known to
the State of California to cause cancer and
birth defects or other reproductive harm.
Wash hands after handling.
• Keep out of reach of children.
• Do not disassemble the Instant Power.
Take it to a qualied service professional
if service or repair is required. Incorrect
assembly may result in re or electrical shock.
• Do not use the Instant Power to jump a
vehicle while charging the internal battery.
• Do not recharge the Instant Power with a
damaged extension cord.
• The Instant Power gets hot during charging
and must have proper ventilation.
• Do not set the Instant Power on ammable
materials, such as carpeting, upholstery,
paper, cardboard, etc.
• Place the Instant Power as far away from
the battery being jumped as the cables
will permit.
• Do not expose the Instant Power to rain
or snow.
• Never place the Instant Power directly
above battery being jumped.
• To prevent arcing, never allow the clamps to
touch together or to contact the same piece
of metal.
• Use of an attachment not recommended or
sold by Schumacher® Electric Corporation may
result in damage to the unit or personal injury.
• Never operate the Instant Power if it is
damaged.
• If someone else uses the Instant Power,
ensure they are well informed on how to
use it safely, and have read and understood
the operating instructions.
• The Instant Power is NOT designed to be
installed as a replacement for a vehicle
battery.
• Use ONLY on vehicles, boats and garden
tractors powered with a 12V DC battery
system.
• If the engine fails to start after the
recommended number of attempts,
disconnect the unit and look for other
problems that may need to be corrected.
• Use the Instant Power for jump starting
lead-acid batteries ONLY. Do not use for dry
cell batteries that are commonly used with
home appliances.
PERSONAL SAFETY PRECAUTIONS
• Wear complete eye and clothing protection
when working near lead-acid batteries.
Always have someone nearby for help.
• Have plenty of fresh water, soap and baking
soda nearby for use, in case battery acid
contacts your eyes, skin, or clothing. Wash
immediately with soap and water and seek
medical attention.
• If battery acid comes in contact with eyes,
ush eyes immediately for a minimum 10
minutes and get medical attention.
• Neutralize any acid spills thoroughly with
baking soda before attempting to clean up.
• Remove all personal metal items from your
body, such as rings, bracelets, necklaces
and watches. A battery can produce a short
circuit current high enough to weld a ring to
metal, causing a severe burn.
• Never smoke or allow a spark or ame in
the vicinity of the battery or engine.
• 4 •
FEATURES
1
4
5
6
8
7
3
2
XP600
1. Rotary switch for USB and jump starter
2. Battery status indicators
3. Battery status button
4. USB port
5. Built-in work light
6. Worklight ON/OFF switch
7. 12V DC power outlet
8. Battery clamps
XP750W
1. Air compressor hose
2. USB port
3. Rotary switch for USB and jump starter
4. Built-in work light
5. Battery status indicators
6. Battery status button
7. Worklight ON/OFF switch
8. 12V DC power outlet
9. Battery clamps
10. Air compressor gauge
11. Air compressor ON/OFF switch
12. Internal battery charger port
13. Air compressor hose wrap cleats
14. Air compressor adapters
and storage bag
2
1
5
6
7
9
8
3
4
14
13
10
11
12
XP400W
1. Rotary switch
2. Battery status indicators
3. Battery status button
4. 12V DC power outlet
5. Battery clamps
1
3
2
5
4
CHARGING THE INTERNAL BATTERY OF THE INSTANT POWER
IMPORTANT! CHARGE IMMEDIATELY
AFTER PURCHASE, AFTER EACH USE
AND EVERY 30 DAYS, TO KEEP THE
INSTANT POWER’S INTERNAL BATTERY
FULLY CHARGED AND PROLONG
BATTERY LIFE.
CHECKING THE LEVEL OF THE
INTERNAL BATTERY
Press the Battery Status button on the
front of the unit. The LED lights will indicate
the current charge level as follows:
RED – less than 20% of full charge;
immediately charge the unit.
YELLOW – 20-80% of full charge.
GREEN – more than 80% of full charge.
CHARGING THE INTERNAL BATTERY
Charge the internal battery for the Instant
Power using an extension cord (not included).
NOTE: Use of an improper extension cord
could result in a risk of re and electric shock.
• 5 •
1. To charge, ip the AC connector on
the back of the unit UP and plug in an
18 AWG or larger extension cord.
2. Plug the extension cord into a 120VAC
electrical wall outlet.
3. While the jump starter is charging, the RED
LED will be on. Complete charging may
take up to 72 hours. When the RED LED
turns off, the jump starter is ready to use.
4. When the internal battery is fully charged,
the charger will automatically go into
maintain mode and maintain the battery
at full charge without damaging it. When
in maintain mode, the GREEN LED will
pulse, as long as there is an AC cord
connected to the charging port.
5. Charge the jump starter as soon as
possible after use.
CHARGING THE INTERNAL BATTERY
WHILE DRIVING
You may also charge the internal battery
while driving, using a male-to-male
charger cable (part number 94500109 –
not included).
IMPORTANT: DO NOT CHARGE
INTERNAL BATTERY FOR MORE THAN
30 MINUTES OR LEAVE THE BATTERY
UNATTENDED. IT COULD EXPLODE,
CAUSING PROPERTY DAMAGE OR
PERSONAL INJURY.
1. Make sure the car is running.
2. Insert one end of the accessory cable into
the 12V DC power outlet.
3. Insert the other end of the accessory
cable into the vehicle’s accessory outlet
(lighter socket).
NOTE: The RED LED does not operate
during this method of charging. Using this
method to charge the battery overrides the
maintain mode and the battery can be
overcharged.
4. Monitor the progress of the charge by
pressing the Battery Status button on
the front of the unit. When the battery is
fully charged, disconnect the accessory
cable from the Instant Power, then from
the lighter socket of the vehicle.
NOTE: Completely disconnect the charger
cable when the engine is not running.
USING THE INSTANT POWER
IMPORTANT: Using the Engine Start feature
without a battery installed in the vehicle will
damage the vehicle’s electrical system.
1. Turn the ignition OFF.
2. Lay the DC cables away from any
fan blades, belts, pulleys and other
moving parts.
3. For a negative-ground vehicle (as in most
vehicles), connect the Instant Power’s
POSITIVE (RED) clamp to the POSITIVE
(POS, P, +) battery post. Next, connect
the NEGATIVE (BLACK) clamp to the
vehicle chassis or engine block, away
from the battery.
4. For a positive-ground vehicle, connect
the Instant Power’s NEGATIVE (BLACK)
clamp to the NEGATIVE (NEG, N, -)
battery post. Next, connect the POSITIVE
(RED) clamp to the vehicle chassis or
engine block away from the battery.
5. Turn the switch to the ON position.
6. Crank the engine for no more than
8 seconds. If the engine does not start,
wait 2 minutes before cranking again.
7. After the engine starts, turn the switch to
the OFF position and remove the Instant
Power from the battery.
8. Charge the Instant Power.
USING THE USB PORT
(Models XP600 and XP750W)
The USB port provides up to 2A at 5V DC.
1. Ensure the battery clamps are securely
clipped on the storage holders.
2. Turn the Instant Power ON.
3. Plug your device into the USB port.
4. When nished using the USB port, turn
the switch to the OFF position.
5. Charge the Instant Power.
USING THE WORK LIGHT
(Models XP600 and XP750W)
The work light is controlled by a sliding ON/
OFF switch located on the front of the Instant
Power. Make sure the lamp is turned OFF
when the unit is being recharged or stored.
Position the Instant Power on a at, stable
surface near the intended work area.
Ensure the battery clamps are securely
clipped on the storage holders.
POWERING A 12V DC DEVICE
The Instant Power is a power source for all
12V DC accessories that are equipped with
a 12V accessory plug. Use it for power
outages and on shing or camping trips.
NOTE: Do not power a 12V device with the
Instant Power while charging the internal
battery.
Loading...