Schrader Electronics CRMJ1939 User Manual

The device under test is manuf actured by the grantee (Schrader Electronics) and sold as an
OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure
the end-user has all applicable / appropriate operating i nstructions. When end-user instruc tions
are required, as in the case of this product, the grantee must notify the OEM to notify the end­user.

Schrader Electronics will supply this document to the reseller/distributor dictating what must
be included in the end user’s manual f or the c ommercial product.

INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL

The following information (in blu e) must be included in the end product user’s manual to
ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must
be included in the manual if the device label is not readily accessible to the end user. The
compliance paragraphs below must be included in the user's manual.

******************************************************************************

FCC ID: MRXCRMJ1939
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.

.

WARNING: Changes or modifications not expressively approved by the party responsible for
compliance could void the user's authority to operate the equipment.

******************************************************************************