Page 1
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Product data sheet
Characteristics
ZB4BD3
Harmony XB4, Selector switch head, metal,
black, Ø22, 3 positions, stay put
Main
Range of product Harmony XB4
Product or component
type
Device short name ZB4
Bezel material Chromium plated metal
Mounting diameter 22mm
Head type Standard
Sale per indivisible
quantity
Shape of signaling unit
head
Type of operator Stay put
Operator profile Black standard handle
Operator position
information
Head for selector switch
1
Round
3 positions +/- 45°
Complementary
CAD overall width 29mm
CAD overall height 29mm
CAD overall depth 44mm
Net weight 0.04kg
Resistance to high pressure washer 7000000Pa at 55°C, distance : 0.1 m
Mechanical durability 1000000cycles
Electrical composition code C3 for <6 contacts using single blocks in front mounting
Device presentation Basic element
C4 for <6 contacts using single and double blocks in front mounting
C5 for <5 contacts using single blocks in front mounting
C6 for <5 contacts using single and double blocks in front mounting
C7 for <4 contacts using single blocks in front mounting
C8 for <4 contacts using single and double blocks in front mounting
C11 for <3 contacts using single blocks in front mounting
Environment
Protective treatment TH
Ambient air temperature for storage -40…70°C
Ambient air temperature for operation -40…70°C
Overvoltage category Class I conforming to IEC 60536
IP degree of protection IP67 conforming to IEC 60529
NEMA degree of protection NEMA 13
IK degree of protection IK06 conforming to IEC 50102
Standards EN/IEC 60947-5-5
IP69
IP69K
NEMA 4X
EN/IEC 60947-1
UL 508
CSA C22.2 No 14
EN/IEC 60947-5-4
EN/IEC 60947-5-1
JIS C8201-5-1
JIS C8201-1
Oct 4, 2022
1
Page 2
Product certifications LROS (Lloyds register of shipping)
Vibration resistance 5 gn (f= 2…500Hz) conforming to IEC 60068-2-6
Shock resistance 30 gn (duration = 18ms) for half sine wave acceleration conforming to IEC
DNV
GL
BV
UL listed
CSA
60068-2-27
50 gn (duration = 11ms) for half sine wave acceleration conforming to IEC
60068-2-27
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Weight 44.0g
Package 1 Height 3.6cm
Package 1 width 5.3cm
Package 1 Length 5.3cm
Unit Type of Package 2 P06
Number of Units in Package 2 2000
Package 2 Weight 104.204kg
Package 2 Height 77.0cm
Package 2 width 60.0cm
Package 2 Length 80.0cm
Unit Type of Package 3 S03
Number of Units in Package 3 250
Package 3 Weight 11.686kg
Package 3 Height 30.0cm
Package 3 width 30.0cm
Package 3 Length 40.0cm
Offer Sustainability
Sustainable offer status Green Premium product
REACh Regulation
REACh free of SVHC Yes
EU RoHS Directive
Toxic heavy metal free Yes
Mercury free Yes
RoHS exemption information
China RoHS Regulation
Environmental Disclosure
Circularity Profile
California proposition 65 WARNING: This product can expose you to chemicals including: Di-isodecyl
REACh Declaration
Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS
Declaration
Yes
China RoHS Declaration
Product Environmental Profile
End Of Life Information
phthalate (DIDP), which is known to the State of California to cause birth defects
or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Contractual warranty
Warranty 18 months
2
Page 3
Product data sheet
Dimensions Drawings
Dimensions
ZB4BD3
3
Page 4
Product data sheet
ZB4BD3
Mounting and Clearance
Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on
Printed Circuit Board
(1) Diameter on finished panel or support
(2) 40 mm min. / 1.57 in. min.
(3) 30 mm min. / 1.18 in. min.
(4) Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm 0
(5) 45 mm min. / 1.78 in. min.
(6) 32 mm min. / 1.26 in. min.
+0.4
/ 0.88 in. 0
Connection by Faston Connectors
+0.016
)
Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection
Panel Cut-outs (Viewed from Installer’s Side)
A: 30 mm min. / 1.18 in. min.
B: 40 mm min. / 1.57 in. min.
Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mm
4
Page 5
A: 30 mm min.
B: 40 mm min.
Dimensions in in.
A: 1.18 in. min.
B: 1.57 in. min.
General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max.
Installation Precautions
● Minimum thickness of circuit board: 1.6 mm / 0.06 in.
● Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
●
Orientation of body/fixing collar ZB4 BZ009: ± 2°30’ (excluding cut-outs marked a and b).
● Tightening torque of screws ZBZ 006: 0.6 N.m (5.3 lbf.in) max.
● Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws:
○ every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
○ with each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.
5
Page 6
(1) Panel
(2) Printed circuit board
Mounting of Adapter (Socket) ZBZ 01•
● 1 2 elongated holes for ZBZ 006 screw access
● 2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ 01•
● 3 8 × Ø 1.2 mm / 0.05 in. holes
● 4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
● 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
● 6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01•
Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ 01•.
6
Page 7
Product data sheet
ZB4BD3
Technical Description
Electrical Composition Corresponding to Code C3
Electrical Composition Corresponding to Code C4
Electrical Composition Corresponding to Code C5
Electrical Composition Corresponding to Code C6
Electrical Composition Corresponding to Code C7
7
Page 8
Electrical Composition Corresponding to Code C8
Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1
Legend
Single contact
Double contact
Light block
Possible location
Sequence of Contacts Fitted to 3-position Selector Switch Body
Position 315°
Push Position Top
Bottom
Location Left Centre Right
State 1 1 0
Contacts N/O closed closed open
N/C open open closed
8
Page 9
Position 0°
Push Position Top
Bottom
Location Left Centre Right
State 0 0 0
Contacts N/O open open open
N/C closed closed closed
Position 45°
Push Position Top
Bottom
Location Left Centre Right
State 0 1 1
Contacts N/O open closed closed
N/C closed open open
9
Loading...