Product End of Life Instructions
Lexium SD3 Stepper Motor Drive
ENVEOLI111103EN_V2 10/2020
Potential disassembly risks
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
• Disconnect all power from all equipment including connected devices prior to removing any covers or doors, or installing
or removing any accessories, hardware, cables, or wires except under the specific conditions specified in the appropriate
hardware guide for this equipment.
• Wait 5 minutes to allow the internal capacitors to discharge.
• Always use a properly rated voltage sensing device to confirm the power is off where and when indicated.
Failure to follow these instructions will result in death or serious injury.
End of Life Instructions
1
2
ENVEOLI111103EN_V2 10/2020
Weight (in
g)
13
48.798218
36
Electrolyte capacitors which size:
height > 25 mm, diameter > 25 mm or
proportionately similar volume
To be depolluted
2
Electronic Board (Power) > 10cm²
To be depolluted
3
Electronic Board (Power) > 10cm²
To be depolluted
4
Electronic Board (Power) > 10cm²
SD328BU25S2
Date of information release
1063 g
10/2020
Schneider Electric Industries SAS
Brand name
Schneider Electric
Component / Material
Product reference
Total representative product mass
Representative product dimensions
72 x 145 x 140
Manufacturer identification
x2
Product description
To be depolluted
1
Electronic Board (Power) > 10cm²
To be depolluted
5
Recommendation
Comment
Number on
drawing
5
4
3
ENVEOLI111103EN_V2 10/2020
50%
www.schneider-electric.com
ENVEOLI111103EN_V2
Published by Schneider Electric
Additional information
Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1,
20 Sep. 2008 presented to the French Agency for Environment and Energy
Management: ADEME).
RCS Nanterre 954 503 439
Capital social 896 313 776 €
Legal information
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE). The product family must be disposed according to the
legislation of the country. This document is intended for use by end of life recyclers or treatment
facilities. It provides the basic information to assure an appropriate end of life treatment for the
components and materials of the product.
10/2020
Country Customer Care Center
http://www.schneider-electric.com/contact
35, rue Joseph Monier
CS 30323
F- 92506 Rueil Malmaison Cedex
Schneider Electric Industries SAS
Recyclability potential
© 2020 - Schneider Electric – All rights reserved
Loading...