schneider Zelio Logic User Manual

Telemecanique

Zelio Logic

Logically

advanced!...

Building a New Electric World

Zelio Logic

...

for a

a

host

multitude

Zelio Logic is designed for use in

small automation systems:

Simple machines in both the industrial
and commercial sectors.

r

With Zelio Logic, opt for a competitive
and easy to set-up logic programming solution:

A small investment for a host of functions.
An advanced solution that takes into

account specification variations, due to
simple and quick programming.

Compact, Zelio Logic helps to reduce the

size of your enclosures and integrates
perfectly in your installations.

of functions,

of applications

The reduced cabling and setting-up times
provide savings both for installation and
maintenance.

r

Intuitive programming directly on front face or by PC

The simplicity of its programming, assured by the
universality of the contact language
(the closest to electrical diagram representation),
meets the demands of the automation engineer
and the requirements of the electrician.

Programming can be performed:

locally, using buttons and display screen

on the front face of the smart relay,
on a PC, using «Zelio Soft»
multilingual software,
on universal assistant Pocket PC, using
«Zelio Soft Pocket PC» software.

A

complete

and

r

Standards and certifications
UL / CSA / C-Tick / GL
CE marking

high perfor mance

r

Smart relays with display (10 to 20 I/O)

The simplicity of programming directly on the front of the product, due
to the ergonomics of the buttons, reduces the usage of documentation
to a minimum.

Smart relays without display and without buttons (10 to 12 I/O)

These provide not only a competitively priced solution,
but also confidentiality of applications.

Smart relays with integrated AS-i interface

Designed to allow the creation of local automation sequences.

Smart relays with relay or transistor outputs

Relay outputs: high breaking capacity (8 A),
Transistor outputs: for direct control of contactors and
integral protection against short-circuits and overloads.

Range of supply voltages available:

12 V DC, 24 V AC, 24 V DC, 100 to 240 V AC,
Supply modules specifically for sensors/actuators.

range

r

A host of functions:

Functions

Up to 10 timers, each configurable from a
choice of 8 different types
(0.1 seconds to 100 hours),
Up to 10, 4-digit, up/down counters
(0 to 9999),
8 analogue comparators, each configurable
from a choice of 7 types of comparison,
4 clocks, each with 4 channels,
15 auxiliary relays,
Diversity of coil functions; with memory
(set/reset), remote switch, normal.

Modes

Parametering mode

Enables the parameter values of the
function blocks to be adjusted.

Display mode

Enables display of the current values of
the various function blocks.

Diagnostic mode

In RUN mode, view the I/O status.