Schneider LAD4DDL Installation Instructions

LC1Dpp3
www.schneider-electric.com
www.schneider-electric.com
W9 1378322 0211 A06
01 - 2013
1
0,1
1
3
LA2 DT2
Travail
ON DELAY
30
10
0,1-30s
LADN
LAD8N
_
,LC,
---
LXD1..
LADN
,
---
LADT
0,1
1
LADR
3
LA2 DT2
0,1-30s
30
10
,
---
A1 +
A2 -
_
---
..V ..Hz
2
0,1
1
3
LA2 DT2
Travail
ON DELAY
30
10
0,1-30s
LAD6K LADN LADT LADR
[mm²]
LC1D093/D123/ DT203/D0983
LC1D183/D253/ DT253/D1283
LC1D323
LC1DT323/DT403/ D1883/D2583
LC1D pp 3
3P AC TeSys D contactors are grade 3 (LC1D09 -> LC1D18) and grade 2 (LC1D25 -> LC1D38) according to GB 21518. Maximum power consumption lower than 9.5 VA.
根据GB 21518标准,三极 TeSys D 系列交流接触器能效等级为3级(LC1D09 -> LC1D18) 和2级(LC1D25 -> LC1D38),产品最大吸持功率低于9.5VA
10 mm
3/8"
10 mm
3/8"
10 mm
3/8"
13 mm
1/2"
8 mm
5/16"
[mm²]
1…2,51…2,5
1…4 1…4
1…4 1…4
1…10
1…2,51…2,5
-
AWG
AWG14-18 CU 75°C Solid or Stranded
AWG10-18 CU 75°C Solid or Stranded
AWG10-14 CU 75°C Solid AWG8-14 CU 75°C Stranded
AWG14-18 CU 75°C Solid or Stranded
3,5 mm
4 mm
4 mm-
4 mm
3,5 mm
LAD4RC LAD4V LAD4T
HAZARD OF ELECTRIC SHOCK, EXPLOSION,OR ARC FLASH
Disconnect all power before servicing equipment.
Failure to follow these instructions will result in death or serious injury.
能有触电、爆炸或电弧灼伤危险。
可 在此电力设备上进行操作时,请先断开所有电源。 不遵循上述规定将可能导致人员伤亡。
"For Motor Starting Use Schneider Electric Overload Relay Series LR".
3/L2
1/L1
A1
A2
4/T2
2/T1
DANGER /
电动机起动请使用施耐德电气LR系列热过载继电器
5/L3
13/NO
14
6/T3
危险
21/NC
2
22
2
1
LAD4TpDL
LAD4DDL
LAD9DL
3
1
W9 1378322 0211 A06 01 - 2013 1/2
RISK OF FIRE OR ELECTRIC SHOCK (FOR CONTACTOR WITH UL HI-FAULT SHORT CIRCUIT CURRENT RATINGS ONLY)
The opening of the branch-circuit protective device may be an indication that a fault current has been interrupted. To reduce the risk of fire or electric shock, current-carrying parts and the other components of the controller should be examined and replaced if damaged.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
可能有火灾或者触电的危险(仅限UL高故障短路电流额定值的接触器)。 支路保护设备断开,表明故障电流已被中断。 为降低火灾或触电风险,应检查带电部件和 其他控制元件,如有损坏,需及时更换。 不遵循上述规定将可能导致人员伤亡或设备损坏。
WARNING /
警告
W9 1378322 0211 A06
2/2
Loading...