Page 1
ENVEOLI1901002_V1 - End of Life Instructions - IHP 1C
IHP 1C
Product End of Life
Instructions
Insert the picture of representative product (JPG – 300 dpi)
refer to shopping kiosk
http://shoppingkiosk.schneider-electric.com/news.aspx
ENVEOLI1901002_V1 01/2019
Page 2
ENVEOLI1901002_V1 - End of Life Instructions - IHP 1C
Weight (in
g)
16.7
37.1
10.6
1
Including all soldering parts with
LCD screen
Brand name
Schneider Electric
To be depolluted
2
Electronic Board (Communication) >
10cm²
Including all soldering parts without
battery
To be depolluted
3
Other battery
Lithium primary cylindrical cell
Product description
Manufacturer identification
Schneider Electric Industries SAS
To be depolluted
Electronic Board (Communication) >
10cm²
End of Life Instructions
Recommendation
Comment
Number on
drawing
Component / Material
Product function
Product reference
Total representative product mass
Representative product dimensions
65.5mm x 90mm x 45mm
Additional similar product
references
The IHP with weekly program controls lighting, air conditioning, flushing, etc.
CCT15441
CCT15441
Date of information release
113.2 g
01/2019
Accessories
No
Insert an exploded-view of the product
Identify each hazardous (red), to be depolluted (orange) and to be dismantled (green) parts
ENVEOLI1901002_V1 01/2019
Page 3
ENVEOLI1901002_V1 - End of Life Instructions - IHP 1C
50%
www.schneider-electric.com Published by Schneider Electric
ENVEOLI1901002_V1 © 2017 - Schneider Electric – All rights reserved
01/2019
Country Customer Care Center
http://www.schneider-electric.com/contact
35, rue Joseph Monier
CS 30323
F- 92506 Rueil Malmaison Cedex
Schneider Electric Industries SAS
Recyclability potential
Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1, 20
Sep. 2008 presented to the French Agency for Environment and Energy Management:
ADEME).
RCS Nanterre 954 503 439
Capital social 896 313 776 €
In case of special transportation:
transportation method
Legal information
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE). The product family must be disposed according to the
legislation of the country. This document is intended for use by end of life recyclers or treatment
facilities. It provides the basic information to assure an appropriate end of life treatment for the
components and materials of the product.
No
Additional information
ENVEOLI1901002_V1 01/2019
Loading...