
ENVEOLI1901001_V1 - End of Life Instructions - IC Astro 1C - SMART
Product End of Life
Instructions
Insert the picture of representative product (JPG – 300 dpi)
refer to shopping kiosk
http://shoppingkiosk.schneider-electric.com/news.aspx
ENVEOLI1901001_V1 01/2019

ENVEOLI1901001_V1 - End of Life Instructions - IC Astro 1C - SMART
Electronic Board (Communication) >
10cm²
Including all soldering parts with
LCD screen
Electronic Board (Communication) >
10cm²
Including all soldering parts without
battery
Manufacturer identification
Schneider Electric Industries SAS
Lithium primary cylindrical cell
Product function
Product reference
Total representative product mass
Representative product dimensions
Additional similar product
references
The IC Astro - SMART with weekly time switch controls the light facilities of streets, external
stairways, etc. Programming can be done on the device or with the Kit LTS Software in conjunction
with the Memory stick.
Date of information release
Insert an exploded-view of the product
Identify each hazardous (red), to be depolluted (orange) and to be dismantled (green) parts
ENVEOLI1901001_V1 01/2019

ENVEOLI1901001_V1 - End of Life Instructions - IC Astro 1C - SMART
www.schneider-electric.com Published by Schneider Electric
ENVEOLI1901001_V1 © 2017 - Schneider Electric – All rights reserved
Country Customer Care Center
http://www.schneider-electric.com/contact
F- 92506 Rueil Malmaison Cedex
Schneider Electric Industries SAS
Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1, 20
Sep. 2008 presented to the French Agency for Environment and Energy Management:
ADEME).
RCS Nanterre 954 503 439
Capital social 896 313 776 €
In case of special transportation:
transportation method
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE). The product family must be disposed according to the
legislation of the country. This document is intended for use by end of life recyclers or treatment
facilities. It provides the basic information to assure an appropriate end of life treatment for the
components and materials of the product.
ENVEOLI1901001_V1 01/2019