Page 1
ESD - simulator
y
g
IEC, ISO, ANSI, ….
SESD 30000
With self test of the simulator
♦ 30 kV air discharge and
30 kV contact discharge
♦ Version SESD 30000 - A
Battery and / or main operation
Introduction
The ESD simulator SESD 30000 can be used for EMC tests on systems and installations according to the
standards IEC / EN 61000-4-2 and ISO 10605 (Automotive).
The flexible set-up of the SESD 30000 allows further tests according to different standard and customer
definitions.
Saving costs for
re-calibration
Absolutely necessary for
automatically tests
♦ Optional: automatic charge absorber
♦ Plug- in R and C networks -
it is possible to combine various C - modules
and R - modules
Benefits:
♦ Capacity modules available up to 1000 pF
♦ Resistor modules available from 50 Ohm up to > 5 kohm; Special module 0 Ohm (only for air discharge)
♦ Automatic polarity switching module (optional)
♦ Fast Rise Time module to 0,3 ns (optional). Possibility of stricter and more aggressive tests (e.g. ANSI)
♦ Desktop control unit with a big display and digits which are easy to read
♦ All modules are being electronically recognised – the result is shown on the display
♦ Ergonomic grip with big trigger key
♦ Big keys for easy and fast parameter adjustments
♦ User defined adjustments possible as following: contact discharge with contact control or external
triggering via separate key
♦ Remote control including RS 232 optical set with 10 m fibre optics cable and control software (optional)
♦ Self test of the ESD-generator, adjustment by remote control or service menu
ed without notice
Example: Test level and voltages according to IEC and ISO
IEC / EN 61000-4-2: -> 150 pF/ 330 Ohm, discharge voltage up to 30 kV
be chan
ISO TR 10605: Tests from inside the vehicle -> 330 pF / 330 ohm and 2000 Ohm, up to 30 kV
Tests from outside the vehicle -> 150 pF / 330 ohm and 2000 Ohm, up to 30 kV
71030
Technical data ma
Page 2
Test tip for
y
g
air discharge
Discharge module
IEC / ISO
Capacity module
Resistor module
Test tip for
contact dischar
Connector for the
e
Trigger key
Connector for a tripod
Polarit
module
discharge return cable
Technical data: SESD 30000
Generator:
Output voltage ⊗ adjustable via digital pot
Air discharge ⊗ 1 kV up to 30,0 kV
in steps of 100 V
Contact discharge ⊗ 1 kV up to 30,0 kV
(with contact control) in steps of 100 V
Polarity ⊗ positive and negative
Mode ⊗ air discharge and
contact discharge
Repetition frequency of the discharge pulses
Air discharge ⊗ single or multiple pulses
(frequency depends on the
distance between probe
and EUT)
Contact discharge ⊗ single pulse, 0.1 Hz,
0.2 Hz, 1 Hz, 2 Hz,
5 Hz, 10 Hz, 20 Hz
Continuous operation ⊗ at air discharge and
contact discharge
Pre-selection counter ⊗ 1 - 9999
Options:
SESD 30000 P ESD generator includes electronically polarity module
SESD 30000 A ESD generator for battery and / or main operation
SESD 30 Cxxx Capacity module (values up to 1000 pF)
SESD 30 Rxxx Resistor module (values from 50 Ohm up to > 5 kOhm)
SESD 30 R0 Resistor module 0 Ohm (only for air discharge)
SESD 30 P200 Electronically polarity module
SESD 30 M200 Faster discharging module (rise time to 0,3 ns)
SESD 30 S100 Optical set and control software
SESD 30 MOD-1 HBM – module 100 pF / 1500 Ohm with rise time > 5 ns
SESD 30 MOD-3 Automatic ESD charge absorber, max. 2 Hz at “CON” discharge
SESD 3025 Test tip, diameter 30 mm, for AIR discharge > 15 kV
SEDS 3026 Test tip, length 50 mm with spring pin, for automatic tests with contact discharge
SESD 8800-4 ESD verification set 2 Ohm (4 GHz) to verify the ESD pulse
Impedance standard: ⊗ 150 pF / 330 Ω
(IEC / EN 61000-4-2)
others: see options
Probes ⊗ acc. IEC / EN 61000-4-2
and ISO / TR 10605
Operation temperature ⊗ 0 - 40° Centigrade
Rel. humidity ⊗ 0 - 60%
Weight ⊗ app. 1500 g
Basis configuration:
Mechanical polarity module
Capacity module 150 pF
Resistor module 330 Ohm
Desktop control unit
Power supply ⊗ 85-264 VAC, 47-63 Hz
Consumed power ⊗ < 50 VA
Weight ⊗ app. 1450 g
Loading...