Schick QUBE II Original Instruction
D21518 Original Instructions
Original Instructions
Schick GmbH
Thank you for purchasing a high-quality technical device from SCHICK GmbH. We hope you will
enjoy working with your new dental handpiece and wish you the best of success. We have prepared this operating manual in order to acquaint you with your new device and to provide the
necessary information for operation and maintenance.
Project data:
Project designation:
Project number: 9000_12_02_2015
Order:
Trade name: Schick
Product name:
Serial number: Axxx xxx
Machine number: 9xxx_
Model: SF, ST, SK
Type:
Manufacturer: Schick GmbH
A
uthorized
re
p
resentative:
Schick GmbH
Lehenkreuzweg 12 Lehenkreuzweg 12
D-88433 Schemmerhofen D-88433 Schemmerhofen
Tel. +49 7356 95000 Tel. +49 7356 95000
Fax +49 7356 950095 Fax +49 7356 950095
info@schick-dental.de info@schick-dental.de
www.schick-dental.de www.schick-dental.de
Established: 2017/07
Revision date: 2018/01
About this operating manual 1
D21518 Original Instructions
3/32
Contents
1 About this operating manual ....................................................................................... 6
1.1 General notes ................................................................................................................. 6
1.2 Related documentation .................................................................................................. 6
1.3 Signs and symbols used ................................................................................................ 6
1.4 Structure of warnings ..................................................................................................... 7
1.5 Technical terms and abbreviations used ........................................................................ 8
2 General safety regulations .......................................................................................... 8
2.1 Principles ........................................................................................................................ 8
2.2 Intended use ................................................................................................................... 8
2.3 Foreseeable misuse ....................................................................................................... 8
2.4 Selection and qualification of the personnel ................................................................... 9
2.5 Workstations for operating personnel ............................................................................. 9
2.6 Safety equipment ........................................................................................................... 9
Fire protection ...................................................................................... 9
2.7 Safety signs .................................................................................................................. 10
Explanation ........................................................................................ 10
2.8 Safety measures .......................................................................................................... 10
Personal protective equipment .......................................................... 10
2.9 Safety regulations ......................................................................................................... 10
General information............................................................................ 10
During transport ................................................................................. 10
During installation ............................................................................... 10
During operation ................................................................................. 11
Care and control work ........................................................................ 11
Maintenance and repair work ............................................................. 11
Structural modifications ...................................................................... 11
2.10 Upgrading and conversion ........................................................................................... 11
3 List of contents ........................................................................................................... 11
1 About this operating manual
D21518 Original Instructions
4/32
4 Technical description ................................................................................................ 12
4.1 Overview ...................................................................................................................... 12
Function description ........................................................................... 13
4.2 Interfaces ...................................................................................................................... 13
4.3 Characteristics of the tools ........................................................................................... 13
4.4 Name plate ................................................................................................................... 14
5 Transport and storage ............................................................................................... 14
5.1 Transport ...................................................................................................................... 14
Installation site requirements ............................................................. 14
5.2 Storage ......................................................................................................................... 14
Storage site requirements .................................................................. 14
6 Installation and commissioning ................................................................................ 15
6.1 Installation .................................................................................................................... 15
Required tools .................................................................................... 16
Safety precautions before installation ................................................ 16
Installation .......................................................................................... 16
Installing the control unit on the suspension strip .............................. 16
Fixing the power supply ..................................................................... 17
6.2 Commissioning ............................................................................................................. 18
Establish power supply ...................................................................... 18
7 Operating unit ............................................................................................................. 19
7.1 Overview and position .................................................................................................. 19
8 Operating software ..................................................................................................... 19
8.1 Operating concept and LCD display ............................................................................. 19
8.2 Function overview ........................................................................................................ 21
8.3 Basic operation of the control unit ................................................................................ 21
8.4 Operating the handpiece and controller ....................................................................... 22
8.5
switch on ................................................................................................ 22
8.6 Tool change on handpiece ........................................................................................... 22
8.7 Operating modes .......................................................................................................... 22
About this operating manual 1
D21518 Original Instructions
5/32
8.8 Desktop variant ............................................................................................................ 22
8.9 Maximum speed limitation ............................................................................................ 23
8.10 Speed control function .................................................................................................. 23
Activating cruise control: .................................................................... 23
8.11 Changing the handpiece rotation direction ................................................................... 24
8.12 Using the optional electric wax knife ............................................................................ 24
Switching on the electric wax knife: ................................................... 24
Changing the heat output: .................................................................. 24
Switching off the electric wax knife: ................................................... 24
8.13
Switching off ...................................................................................... 25
9 Troubleshooting ......................................................................................................... 25
9.1 How to proceed in case of malfunctions and errors ..................................................... 25
9.2 Fault and error messages ............................................................................................ 25
10 Care and control tasks for operators ....................................................................... 26
10.1 General information ...................................................................................................... 26
10.2 Care and inspection plan .............................................................................................. 26
10.3 Performing care and control work ................................................................................ 27
Dismantling and cleaning of the chuck .............................................. 27
Dismantling the motor cable .............................................................. 28
11 Technical data ............................................................................................................ 29
12 Annex .......................................................................................................................... 30
12.1 Service address ............................................................................................................ 30
12.2 Declaration of Conformity ............................................................................................. 32
1 About this operating manual
D21518 Original Instructions
6/32
1 About this operating manual
You must read this operating manual before using the for the first time.
In particular, you must observe Section 2 "General safety regulations".
General notes
These instructions are intended to acquaint you with your and provide
information on its proper use.
It contains important tips on how to operate the safely and correctly.
Compliance will:
Avoid dangers
Keep repair costs and downtimes to a minimum
Increase the reliability and service life of the product
This manual must be read and adhered to by each person tasked with working with the
In addition to this operating manual, the regulations on accident prevention and environmental protection applicable at the place of installation must also be observed.
Related documentation
The latest version of this manual as well as up-to-date product information is always available under
www.schick-dental.de
.
Signs and symbols used
The following signs and symbols are used in this manual:
Activity symbol: The text after this sign describes handling instructions that must be carried
out in the order indicated, from top to bottom.
Result symbol: The text after this sign describes the result of an action.
Info symbol: Additional Information
About this operating manual 1
D21518 Original Instructions
7/32
Structure of warnings
Signal word Use in case of ... Possible conse-
quences if the safety
advice is not observed:
DANGER
Personal injury
(imminent danger)
Death or severe injuries!
WARNING
Personal injury
(potentially hazardous
situation)
Death or severe injuries!
CAUTION
Personal injury Slight or minor injuries!
Tab. 1.1 Warning levels
The warnings are structured as follows:
Pictogram with signal word corresponding to warning level
Description of danger (type of hazard)
Description of consequences of the danger (resulting hazards)
Measures (activities) to prevent the danger
DANGER!
Type of danger (text)
Consequences of danger (text)
Prevention of danger (text)
Special safety instructions are provided at the relevant locations. These are marked
with the following symbols.
General danger point
This symbol is indicated before activities that may result in personal injury or extensive property damage.
If the source of the danger is unambiguous, this symbol is preceded by one of the following symbols.
High voltage
This symbol is indicated before activities which pose
a risk of electric shock, possibly with fatal consequences.
Hand injuries
This symbol is indicated before activities that pose a
risk of hand injury.
Warning levels
Warning signs
2 General safety regulations
D21518 Original Instructions
8/32
Technical terms and abbreviations used
Abbreviation Explanation
MH Motor handpiece
SK Knee control
SF Foot control
ST Table control
Tab. 1.2 Abbreviations used
2 General safety regulations
Principles
Use only with the maximum speeds specified by the manufacturer. Use only tools which
are approved by the manufacturer/dealer for the application and performance data of
Applications: Industry, commerce
Qualifications of personnel: Trainees and interns must be instructed by an experienced op-
erator
The optional wax knife allows for thermal modelling of the waxes.
The device is operated manually, optionally via an operating unit (table control), knee
plate, foot control, foot pedal
Intended use
QUBE systems are exclusively designed for universal use in dental laboratories for the dry
processing of solid workpieces, such as crowns and bridges, as well as plastic and castmodels. Only tools that are intended for the processing of such materials may be used.
Foreseeable misuse
The system may not be used under the following circumstances:
- in potentially explosive atmospheres
General safety regulations 2
D21518 Original Instructions
9/32
- for medical use on the patient
- processing of wet materials
- for flammable and combustible materials
- any use other than that specified by the manufacturer is considered misuse
- do not clean the handpiece with compressed air
Selection and qualification of the personnel
Qualifications of personnel: Trainees and interns must be instructed by an experienced operator
Workstations for operating personnel
Dental workplace in dental laboratory/practice laboratory/dental practice.
Safety equipment
The lab unit features an operating unit displaying the pre-set maximum speed
directly in the field of vision of the user.
Fire protection
No specific requirements
2 General safety regulations
D21518 Original Instructions
10/32
Safety signs
Reference to rating plate on the control unit.
Explanation
Thoroughly read the operating manual before commissioning.
Safety measures
Do not wear long hair untied.
Always use extraction.
Personal protective equipment
Protective goggles
Extraction at the workplace.
Safety regulations
General information
Caution!
Risk of injury from sharp and/or rotating tools!
Wear safety goggles.
During transport
Transport or shipping only in the original packaging or a suitable shipping box.
During installation
The installation procedure may not impair access to the electricity supply of the power
supply unit.
Loading...