Page 1
1
WIFI SERVER
User Manual and
Troubleshooting Guide
ACKNOWLEDGEMENTS
P2
SAFETY WARNINGS
P2
EQUIPMENT DESCRIPTION
P2
ACCESSORIES/ASSOCIATED PARTS
P3
TECHNICAL CHARACTERISTICS
P3- P5
INSTALLATION
P6
TROUBLESHOOTING GUIDE
P7
TERMS AND CONDITIONS
P7
WARRANTY TERMS + AFTER-SALES
8
Page 2
2
ACKNOWLEDGEMENTS
We thank you for your purchase and hope that you are fully satisfied with this product.
Before you use this product, we recommend that you read the instructions below carefully.
This manual explains how to use and install the product in accordance with its intended use.
SAFETY WARNINGS
EQUIPMENT DESCRIPTION
Module containing a WiFi server and router. The server hosts HTML pages created from data in the CAN network.
Then, from a device with a WiFi connection or equipment with a browser connected to the network (NAVICOLOR
screen, tablet, smartphone, smart TV), it is possible to consult these pages and interact with items in the network.
The WiFi server can be used for:
Management of lighting and electric blinds
Management of one or more audio amplifiers
Remote access to the network and system (with 3G key option)
Troubleshooting
Access to one or more IP cameras.
WARNING: Do not disassemble the device
Any contact with the product's internal components can cause injury. In the event of a malfunction,
only a qualified technician is authorised to repair the device
WARNING: In the event of impact
If the product falls or undergoes heavy impact, immediately contact a qualified person to ensure the
device is working correctly
WARNING: Unpacking the equipment
After unpacking the product, make sure that it is complete and in good condition. If you are not sure,
immediately contact a person with the required professional qualification
WARNING: Unpacking the equipment
Do not leave any part of the packaging within the reach of children or vulnerable adults
Page 3
3
ACCESSORIES/ASSOCIATED PARTS
ACCESSORIES TO BE ORDERED SEPARATELY:
120 Ω CAN bus termination
TECHNICAL CHARACTERISTICS
WIFI SERVER TECHNICAL CHARACTERISTICS
PART NUMBER:
36.159446.00
PERIPHERALS:
2 Ethernet/WiFi ports
1 SD port
1 USB port (option)
1 Micro USB port
1 connector for temperature sensor
2 independent CAN networks (4 connectors)
JST CONNECTOR:
For management of an outside temperature sensor
CAN BUS:
4 x 6-way Micro-Fit connectors (2 separate networks)
WIFI:
802.11 A/B/G/N
USB:
Connection with 3G modem
SECURITY:
WEP, WPA-PSK/WPA2-Personal, WPA/WPA2 Enterprise, 802.11i
EXTERNAL POWER SUPPLY:
8/30 VDC
BATTERY POWER SUPPLY:
4.2 V Li-ion battery
FASTENER CENTRE-TO-CENTRE DISTANCE:
128 x 87 mm
DIMENSIONS (L x W x H):
150 x 95 x 25 mm
WEIGHT:
0.21 kg
WIFI SERVER HARDWARE SPECIFICATIONS
PROCESSOR
Processor models:
Freescale® i.MX28x
Speed grade:
Up to 454 MHz
Core type:
ARM926EJ-S
Cache memory:
16k I-Cache, 32k D-Cache
Internal RAM:
128 kB SRAM
Internal RAM (OCOTP):
1,280 bits
POWER
Flash:
128 Mb NAND flash
RAM:
128 Mb DDR2
MEMORY
(X1 - X2) CAN bus A (6-way):
8 - 12 VDC
(X3 - X4) CAN bus B (6-way):
8 - 12 VDC
(J2) Battery (2-way):
4.2 V Li-ion battery
(J3) External power supply (4-way):
8 - 30 VDC
Page 4
4
POWER SUPPLY MANAGEMENT
Power modes:
On, Standby, Hibernate
Standby exit events (wake-up):
RTC and wake-up by Scheiber bus
Li-ion battery/monitor charger:
Yes
CLOCK
Real-Time Clock:
Yes
PERIPHERALS
CAN bus:
Up to 2 channels, CAN bus 2.0B, 250 kbit/s bit rate
Scheiber Multibloc V8 protocol
SD card:
Yes
High-speed USB 2.0:
Up to 1 high-speed USB 2.0 (with PHY)
Up to 1 USB 2.0 OTG port (with PHY)
Ethernet:
Up to 2 Ethernet connectors
Physical layer: 10/100Base-T
Data rate: 10/100 Mbps, automatic detection
Duplex mode: Full or half-duplex, automatic detection
WIFI
Standard:
802.11 a/b/g/n
Antenna connector:
Yes
Frequency bands:
2.412 - 2.484 GHz
4.900 - 5.850 GHz
Data rate:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 15, 30, 45, 60, 90, 120, 135, 150 Mbps
(HT40, MCS 0-7)
Modulation:
DBPSK, DQPSK, CCK, BPSK, QPSK, 16-QAM, 64-QAM
Transmission power (±2 dBm):
802.11b: 10.5 dBm typical
Security:
WEP, WPA-PSK/WPA2-Personal, WPA/WPA2 Enterprise, 802.11i
ENERGY CONSUMPTION
Wi-Fi 2.4 GHz Transmission, CPU 454
MHz, 50%, UART active:
260 mA @ 12 V
Wi-Fi 2.4 GHz Reception,
CPU Idle (Auto Slow):
160 mA @ 12 V
WiFi
CPU on Standby (IRQ):
25 mA @ 12 V
WiFi on Standby (Host off),
CPU Hibernating (RTC):
0.6 mA @ 12 V
ENVIRONMENT
Operating temperature:
-40°C to + 85°C (-40°F to + 185°F)
Storage temperature:
-40°C to + 85°C (-40°F to + 185°F)
Relative humidity:
5% to 90% (without condensation)
Page 5
5
APPROVALS AND CERTIFICATIONS FOR THE PROCESSOR
Emissions:
FCC Part 15 Class B, EN 55022 Class B, EN 61000-3-2, EN
61000-3-3, ICES-003 Class B,
VCCI Class II, AS 3548, FCC Part 15 Subpart C Section
15.247, IC (Industry Canada),
RSS-210 Issue 5 Section 6.2.2(o), EN 300 328, EN 301 48917
Immunity:
EN 55024, EN 301 489-3
Safety:
UL/UR, or equivalent
Radio:
United States of America, Canada, European Union, Japan,
Australia/New Zealand
Temperature:
IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78
Vibration/Shock:
EC 60068-2-6, IEC 60068-2-64, IEC 60068-2-27
MECHANICAL
Dimensions (without antenna):
150 x 95 x 25 mm
Mounting cut-out:
128 x 87 mm
HMI
Switches:
3 switches with direct access
3 switches inside
LEDs:
(3) WiFi ON/Ethernet ON/USB ON
(2) Inside
Programming of an SD card/CAN bus and configuration status
Page 6
6
INSTALLATION
WIRING
The power supply comes either from a 4-way external power supply or a 2-way Li-ion battery or from the
Scheiber CAN bus (see item 3 on the illustration below).
Connect the temperature sensor to the JST receptacle.
Connect 2 CAN connectors to the SCHEIBER network (connect the 2 other connectors to the client network if
there is one).
The 2 CAN networks are separate.
Connect the Ethernet ports (option depending on installation).
For more details on connections, please consult "WIFI SERVER - Start-up instructions".
WARNING: Connection/disconnection with power on
Do not perform connection or disconnection with power on.
WARNING: Proximity
Indoors, IT devices can connect to 802.11g wireless
networks within a maximum range of 90 metres. These distances
mean that people in close proximity to your home
could also have access to your network.
1
2 3 4 5 1 3 4
2
Page 7
7
TROUBLESHOOTING GUIDE
WEB CONFIGURATION INTERFACE
INACCESSIBLE
If you are using a tablet or phone connected to a WiFi network:
Check the WiFi connection between the device and the router.
Make sure that the WiFi connection light is on.
If the error continues, this means that the problem must come from your hardware. In this case, contact technical
support.
RESET TO FACTORY SETTINGS
Using a sharp object such as a pen or paperclip, press the reset button on the back panel of the router and
keep it pressed for approximately five seconds until the router restarts.
Once the original parameters have been restored, you can access the router from your web browser and
reprogram.
TERMS AND CONDITIONS
The manufacturer cannot be held responsible
and accepts no responsibility in the event of
harm to persons or property due to improper
use and in reference to the warnings provided
in this manual.
SCHEIBER reserves the right to change the
characteristics of its products in the interest
of its customers.
The manuals supplied with this product must
not be reproduced, transmitted, stored in a
search system or translated into any
language, in full or in part, by any means,
without the prior written consent of
SCHEIBER.
Although every effort has been made to
provide you with full and accurate
information in these manuals, we ask that you
inform the SCHEIBER representative for your
country of any error or omission we may have
overlooked.
SCHEIBER reserves the right to change the
characteristics of the hardware and software
described in these manuals at any time and
without prior notice.
Page 8
8
WARRANTY TERMS + AFTER-SALES
WARRANTY SUBJECT:
The company SCHEIBER warranties all its products’ range against failures or masked-failures according to the article
1641 and followings of the Civil Code. Repairs and replacement of the equipment during the warranty period do not
change terms or time of this warranty which is of 2 years. Repairs and replacement of the faulty parts under
warranty are made only on presentation of the invoice which certifies the warranty beginning date.
WARRANTY DOES NOT APPLY:
This warranty can not be applied in case of misuse, wrong installation, repair by anyone else than a SCHEIBER
authorised technician, damage arising from improper use (fuses replaced by another value), utilisation in an
unsuitable environment or if the equipment has suffered from physical damages through handling, transport... It
does not cover calibration or verification due to the normal age of the components.
Warranty modalities: The equipment freight will be charged to the customer. If the returned equipment does not
conform, our company considers it has the right to refuse the free repair and proposes an estimate.
RESPONSIBILITY LIMITS:
In any case, the company SCHEIBER will not be held responsible for direct damages or damages not due to the
normal use of the equipment. In case of a dispute arising between the parties, the case shall be submitted to the
French Right to the court specified by the company SCHEIBER.
Loading...