Multi-stage high performance EMI fi lter
■ High differential and common-mode
attenuation
■ Good low frequency attenuation
■ Optional medical versions (B type)
■ Optional safety versions (A type)
1-phase fi lters
FN 2080
Approvals■ Rated currents from 1 to 16A
Technical specifications
Maximum continuous operating voltage: 250VAC, 50/60Hz
Operating frequency: dc to 400Hz
Rated currents: 1 to 16A @ 40°C max.
High potential test voltage: P –> E 2000VAC for 2 sec
P –> E 2500VAC for 2 sec (B types)
P –> N 1100VDC for 2 sec
Temperature range (operation and storage): -25°C to +100°C (25/100/21)
Flammability corresponding to: UL 94V-2 or better
Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
MTBF @ 40°C/230V (Mil-HB-217F): 1,650,000 hours
1,700,000 hours (B types)
Features and benefits
■ FN 2080 two-stage filters are designed for
easy and fast chassis mounting.
■ FN 2080 filters are also available as B
versions without Y-capacitors for medical
applications as well as A version with low
capacitance for safety critical applications
■ FN 2080 two-stage filters are designed with
good low frequency attenuation.
■ FN 2080 filters are also available as single-
stage filters.
■ Various terminal options allow you to
select the desired connection style.
with necessity for low leakage currents.
■ All filters provide a high conducted
attenuation performance, based on chokes
with high saturation resistance and
excellent thermal behavior.
Typical electrical schematic
P
N
E
Cx RLL1
Line
Cx
CyCy
Load
Typical applications
■ Electrical and electronic equipment
■ Consumer goods
■ Household equipment
■ Building automation
■ Industrial applications
■ Machinery
■ Medical equipment
■ Electronic data processing equipment
■ Office automation and datacom equipment
■ Various noisy applications requiering good
filter performance
P‘
N‘
> Components > FN 2080
Filter selection table
Filter* Rated current Leakage current** Inductance Capacitance Resistance Input/Output Weight
@ 40°C (25°C) @ 230VAC/50Hz L Cx Cy R connections
[A] [mA] [mH] [μF] [nF] [kΩ] [g]
FN 2080-1-.. 1 (1.2) 0.734 22 0.33 4.7 1000 -06 -07 200
FN 2080-3-.. 3 (3.5) 0.734 9.8 0.47 4.7 470 -06 -07 270
FN 2080-6-.. 6 (6.9) 0.734 7.8 1 4.7 220 -06 -07 470
FN 2080-10-.. 10 (11.5) 0.734 4.5 1 4.7 220 -06 -07 750
FN 2080-12-.. 12 (13.8) 0.734 3.25 1 4.7 220 -06 -07 750
FN 2080-16-.. 16 (18.4) 0.734 2.8 1 4.7 220 -06 -07 -08 1020
FN 2080A-1-.. 1 (1.2) 0.04 22 0.33 0.47 1000 -06 -07 200
FN 2080A-3-.. 3 (3.5) 0.04 9.8 0.47 0.47 470 -06 -07 270
FN 2080A-6-.. 6 (6.9) 0.04 7.8 1 0.47 220 -06 -07 470
FN 2080A-10-.. 10 (11.5) 0.04 4.5 1 0.47 220 -06 -07 750
FN 2080A-12-.. 12 (13.8) 0.04 3.25 1 0.47 220 -06 -07 750
FN 2080A-16-.. 16 (18.4) 0.04 2.8 1 0.47 220 -06 -07 -08 1020
FN 2080B-1-.. 1 (1.2) 0.002 22 0.33 1000 -06 -07 200
FN 2080B-3-.. 3 (3.5) 0.002 9.8 0.47 470 -06 -07 270
FN 2080B-6-.. 6 (6.9) 0.002 7.8 1 220 -06 -07 470
FN 2080B-10-.. 10 (11.5) 0.002 4.5 1 220 -06 -07 750
FN 2080B-12-.. 12 (13.8) 0.002 3.25 1 220 -06 -07 750
FN 2080B-16-.. 16 (18.4) 0.002 2.8 1 220 -06 -07 -08 1020
* To compile a complete part number, please replace the -.. with the required I/O connection style (e.g. FN 2080-16-08, FN 2080B-10-06).
** Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level.
Typical filter attenuation
Per CISPR 17; A = 50Ω/50Ω sym; B = 50Ω/50Ω asym; C = 0.1Ω/100Ω sym; D = 100Ω/0.1Ω sym
1 to 6A types 10 and 12A types
16A types
> Components > FN 2080
Mechanical data
Connection style -06, 1 and 3A types
A
F
D
Connection style -06, 6 to 12A types
I
H
A
F
D
I
H
BE
K
N
L
M
G
J
C
Connection style -06, 16A types
A
F
BE
D
N
Q
L
K
H
G
J
M
C
Connection style -07, 6 to 12A types (same dimensions as style -06)
BN BN
BUBUGNYE
O
P
K
BE
N
L
M
C
Connection style -07, 1 and 3A types (same dimensions as style -06)
BN
GNYE
BU
BN
BU
O
Connection style -07, 16A types (same dimensions as style -06)
BN BN
GNYE
BU
BU
O
G
J
P
P
Connection style -08, 16A types (same dimensions as style -06)
A
F
BE
D
Q
L
N
K
H
G
M
C
J
> Components > FN 2080
Dimensions
1A 3A 6A 10A 12A 16A Tolerances
A 85 85 113.5 ±1 156 ±1 156 ±1 119 ±1 ±0.5
B 54 54 57.5 ±1 57.5 ±1 57.5 ±1 85.5 ±1 ±0.5
C 30.3 40.3 45.4 ±1 45.4 ±1 45.4 ±1 57.6 ±1 ±0.5
D 64.8 64.8 94 ±1 130.5 ±1 130.5 ±1 98.5 ±1 ±0.5
E 49.8 49.8 56 56 56 84.5 ±0.5
F 75 75 103 143 143 109 ±0.3
G 27 27 25 25 25 40 ±0.2
H 12.3 12.3 12.4 12.4 12.4 15.6 ±0.5
I 20.8 29.8 32.4 32.5 32.5 ±0.5
J 19.9 11.4 15.5 15.5 15.5 42.25 ±0.5
K 5.3 5.3 4.4 5.3 5.3 4.4
L 6.3 6.3 6 6 6 7.4
M 0.7 0.7 0.9 1 1 1.2
Connection style -06
N 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8
Connection style -07
O 8.3 8.3 8.4 8.4 8.4 8.6 ±0.5
P 14.9 14.9 18 18 18 42.25 ±0.5
AWG type wire AWG 20 AWG 20 AWG 18 AWG 18 AWG 16 AWG 16
Wire length 140 140 140 140 140 140 +5
Connection style -08
N M4
Q 51 ±0.2
All dimensions in mm; 1 inch = 25.4mm
Tolerances according: ISO 2768 / EN 22768
Your local partner:
To find your local partner within Schaffner’s global network, please go to www.schaffner.com June 2007
Loading...