Page 1
Dear Sceptre Customer,
Congratulations on your new SCEPTRE E230BD-FHD LED HDTV purchase.
Thank you for your support. To ensure safety and many years of trouble free
operation of your TV, please read the manual carefully, and register your
Sceptre product at http://www.sceptre.com/Support/Register.htm before
making any adjustments. We hope you enjoy your new SCEPTRE HDTV.
For technical assistance, please call 1800-788-2878 and select option 3 or
email our tech support group at monitor-ts@sceptre.com.
For all other inquiries, please call 1800-788-2878 and select option 4 or
email our customer service group at cs@sceptre.com.
For peace of mind and to protect your investment beyond the standard
warranty, SCEPTRE offers an optional two year extended warranty service for
your TV. This plan gives additional coverage once your standard warranty
period runs out. Please call our customer service group to purchase the
extended warranty.
- 1 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 2
IMPORTANT INFORMATION
- 2 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 3
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause
personal injuries and property damage if improperly handled. This product
has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and / or fire. In order to
prevent potential danger, please observe the following instructions when
installing, operating and cleaning the product. To ensure your safety and
prolong the service life of your Liquid Crystal Television, please read the
following precautions carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade and the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
the plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightening storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- 3 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 4
SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged,
the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
To avoid the risk of electric shock or
component damage, switch off the
power before connecting other
components to the TV.
Unplug the power cord before
cleaning the TV. Please use the
included custom bezel cleaning cloth
for cleaning the bezel of the TV only.
Do not use a liquid or a spray cleaner
for cleaning the product. Do not use
abrasive cleaners.
Always use the accessories
recommended by the manufacturer to
insure compatibility.
When moving the TV from an area of
low temperature to an area of high
temperature, condensation may form
on the housing. Do not turn on the TV
immediately after this to avoid causing
fire, electric shock or component
damage.
Do not place the TV on an unstable
cart, stand, or table. If the TV falls, it
can injure a person and cause serious
damage to the appliance. Use only a
cart or stand recommended by the
manufacturer or sold with the TV.
Any heat source should maintain a
distance of at least 5 feet away from
the TV, i.e. radiator, heater, oven,
amplifier etc. Do not install the product
too close to anything that produces
smoke or moisture. Operating the
product close to smoke or moisture
may cause fire or electric shock.
Slots and openings in the back and
bottom of the cabinet are provided for
ventilation. To ensure reliable
- 4 -
www.SCEPTRE.com
SCEPTRE E230BD-FHD HDTV User Manual
operation of the TV and to protect it
from overheating, be sure these
openings are not blocked or covered.
Do not place the TV in a bookcase or
cabinet unless proper ventilation is
provided.
Never push any object into the
ventilation slots of the TV. Do not
place any objects on the top of the
Product. It could short circuit parts
causing a fire or electric shock. Never
spill liquids on the TV.
Do not use the TV in a portrait format
(by rotating 90 degrees) under high
temperature environment (25°C or
higher), since this would retard heat
dissipation and would eventually
damage the TV.
The TV should be operated only from
the type of power source indicated on
the label. If you are not sure of the
type of power supplied to your home,
consult your dealer or local power
company.
The power cable must be replaced
when using different voltage from that
specified in the User Manual. For
more information, contact your dealer.
The TV is equipped with a three-
pronged grounded plug, a plug with a
third (grounding) pin. This plug will fit
only into a grounded power outlet as a
safety feature. If your outlet does not
accommodate the three-wire
plug, have an electrician install the
correct outlet, or use an adapter to
Page 5
ground the appliance safely. Do not
defeat the safety purpose of the
grounded plug.
Do not overload power strips and
extension cords. Overloading can
result in fire or electric shock.
The wall socket should be installed
near the equipment and should be
easily accessible.
Only the marked power source can be
used for the product. Any power
source other than the specified one
may cause fire or electric shock.
Do not touch the power cord during
thunderstorms. To avoid electric shock,
avoid handling the power cord during
electrical storms.
Unplug the unit during a lightning
storm or when it will not be used for a
long period of time. This will protect
the TV from damage due to power
surges.
Do not attempt to repair or service the
product yourself. Opening or removing
the back cover may expose you to
high voltages, the risk of electric shock,
and other hazards. If repair is required,
please contact your dealer and refer
all servicing to qualified service
personnel.
Keep the product away from moisture.
Do not expose this appliance to rain or
moisture. If water penetrates into the
product, unplug the power cord and
contact your dealer. Continuous use in
this case may result in fire or electric
shock.
Do not use the product if any
abnormality occurs. If any smoke or
odor becomes apparent, unplug the
power cord and contact your dealer
immediately. Do not try to repair the
product yourself.
Avoid using dropped or damaged
appliances. If the product is dropped
and the housing is damaged, the
internal components may function
abnormally. Unplug the power cord
immediately and contact your dealer
for repair. Continued use of the
product may cause fire or electric
shock.
Do not install the product in an area
with heavy dust or high humidity.
Operating the product in environments
with heavy dust or high humidity may
cause fire or electric shock.
Hold the power connector when
removing the power cable. Pulling the
power cable itself may damage the
wires inside the cable and cause fire
or electric shocks. When the product
will not be used for an extended
period of time, unplug the power
connector.
To avoid risk of electric shock, do not
touch the connector with wet hands.
Insert batteries in accordance with
instructions while using the remote
control. Incorrect polarities may cause
damage and leakage of the batteries,
operator injury and contamination the
remote control.
If any of the following occurs please
contact the dealer:
o The power connector fails
or frays.
o Liquid sprays or any object
drops into the TV.
o The Display is exposed to
rain or other moisture.
o The Display is dropped or
damaged in any way.
o The performance of the
Display changes
substantially.
Operating environment: Temperature:
5°C ~ 35°C, Humidity: 10% to 90%
non-condensing, Altitude: 0~10,000 ft.
- 5 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 6
IMPORTANT INFORMATION
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against
voltage surges and static charges. Article 810 of the National Electrical Code,
ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or
unused for long periods of time, unplug the TV from the wall outlet and disconnect the
antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall
into such power lines or circuits.
- 6 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 7
Opening the Package
The SCEPTRE TV is packaged in a carton. Any standard accessories are packed
separately in another carton. The weight of the TV is approximately 9.92 lbs. Due to the
size and weight of the product, it is suggested that it must be handled by a minimum of
2 or more persons. Since the glass can be easily scratched or broken, please handle
the product gently. Never place the unit on a surface with the glass facing downwards
unless it is on protective padding. When opening the carton, check that the product is in
good condition and that all standard accessories and items are included. Save the
original box and all packing materials for future shipping needs.
Package Contents
SCEPTRE TV Display x 1
TV Stand x 1
User Manual x 1
Quick Start Guide x 1
Power Cord x 1
AC Adapter x 1
Warranty x 1
TV Remote Control (AAA Batteries included) x 1
Installation
Please read the user manual carefully before performing the installation. The power
consumption of the display is approximately 36 watts. Please use the power cord
designated for the product. When an extension cord is required, use one with the
correct power rating. The cord must be grounded and the grounding feature must not be
defeated. The product should be installed on a flat surface to avoid tipping. Space
should be maintained between the back of the product and the wall for proper
ventilation. If you would like to mount the TV onto the wall, please see page 8, and 10
for additional information. Avoid installing the product in the kitchen, bathroom or other
places with high humidity dust or smoke, so as not to shorten the service life of the
electronic components. Please ensure the product is installed with the screen in
landscape orientation. Any 90° clockwise or counterclockwise installation may induce
poor ventilation and successive component damage.
- 7 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 8
Attaching or Removing the Stand
1. To attach the base, align the base and the TV. Place the TV's neck on the base
shown below. Lock the screws as the picture shown. Afterwards, the TV is ready
for use.
2. To remove the stand remove the screws in the circled area and the neck will come
off.
- 8 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 9
Table of Contents
IMPORTANT INFORMATION .............................................................................................................. 2
SAFETY INSTRUCTIONS .................................................................................................................... 3
SAFETY INSTRUCTIONS .................................................................................................................... 4
IMPORTANT INFORMATION .............................................................................................................. 6
Television Antenna Connection Protection .............................................................................. 6
Opening the Package ......................................................................................................................... 7
Package Contents ............................................................................................................................... 7
Installation ........................................................................................................................................... 7
Attaching or Removing the Stand ..................................................................................................... 8
Table of Contents ................................................................................................................................ 9
Identifying Front and Rear Panel .................................................................................................... 10
Front View .................................................................................................................................... 10
Rear View Mounting Pattern ..................................................................................................... 10
Top side Control Buttons ........................................................................................................... 11
Rear View Connections ............................................................................................................. 12
Installing Batteries to the Remote Control .............................................................................. 13
SCEPTRE TV Remote Control ...........................................................Error! Bookmark not defined.
Connection Suggestions .................................................................................................................. 16
If You Have Digital Cable without Cable Box or Antenna… .................................................. 16
Connecting DVD Player with Component YPbPr… ................................................................ 17
Connecting Wii™ with Composite… ........................................................................................ 18
Connecting Cable or Satellite boxes with HDMI… ................................................................. 19
Connecting to a PC with VGA and 3.5 mm minijack … .......................................................... 20
Connecting a Digital Audio Receiver with Coax SPDIF… ..................................................... 21
Switching Sources ............................................................................................................................ 22
Ready to Watch Some TV?.................................................................Error! Bookmark not defined.
If You’ve Connected Antenna or Cable to the TV… .................Error! Bookmark not defined.
OSD (On Screen Display) Controls ................................................................................................. 25
Via Remote Control .................................................................................................................... 25
Via TV Side Panel Buttons ......................................................................................................... 25
OSD (On Screen Display) Options .................................................................................................. 26
PICTURE ...................................................................................................................................... 26
SOUND ......................................................................................................................................... 30
CHANNEL..................................................................................................................................... 32
PARENTAL ................................................................................................................................... 34
SETUP .......................................................................................................................................... 35
OTHERS ....................................................................................................................................... 37
Detailed Explanations ....................................................................................................................... 38
USB Connection Explained ....................................................................................................... 38
Closed Captioning (digital and analog) Explained ................................................................. 40
Rating Explained ......................................................................................................................... 40
Aspect Ratio Explained .............................................................................................................. 42
Shortcuts to Browsing Channels .............................................................................................. 44
DVD OPERATION ........................................................................................................................ 45
How do I clean the TV ?.............................................................................................................. 51
Troubleshooting ................................................................................................................................ 52
Call Us If You Need Help! ................................................................................................................. 55
Specification ...................................................................................................................................... 56
LIMITED PRODUCT WARRANTY ..................................................................................................... 58
Disclaimer, Trademarks, & Copyright Information ...................................................................... 60
FCC Compliance Statement ............................................................................................................ 61
- 9 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 10
Identifying Front and Rear Panel
Front View
INDICATOR LIGHT – The light is red when power is plugged in but the TV is not turned on. The
light turns blue when the TV is turned on. Because of the LED in the panel, the TV might take
10 – 12 seconds to power on.
REMOTE SENSOR – The remote sensor receives all the commands from the remote control.
Rear View Mounting Pattern
Mounting Specification : 100mm x 100mm using screw size M4. Length of screw should not exceed
8mm. Please Note : The 8mm length of screw refers to how deep the screw can go inside the
mounting holes. When you’re buying screws, you should add the original 8mm to the thickness of
your mounting plate in order to get the total screw length.
- 10 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 11
Top side Control Buttons
The following are button descriptions from right to left.
1. POWER – Turn on the TV by pressing the button once. Press the button again to
turn off the TV.
2. SOURCE – This button switches between all the different sources of the TV.
When the OSD is active, this button acts as the enter button and confirms the
menu selection.
3. MENU – This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will exit the OSD.
4. CH(+) – This button changes the TV channel up. If the OSD is active, this button
functions as up for the menu.
5. CH(-) – This button changes the TV channel down. If the OSD is active, this
button functions as down for the menu.
6. VOL(+) – This button increases the TV’s volume. If a sub-menu is active, pressing
this button will move the select right.
7. VOL(-) – This button decreases the TV’s volume. If a sub-menu is active, pressing
this button will move the selection left.
8. PLAY/PAUSE – Press this button to play or pause the DVD program you’re
watching.
9. EJECT – Press this button to open or close the DVD player.
Please Note:
For the EJECT and PLAY/PAUSE button to work you must be under the
source DVD. The buttons will not work under other sources.
- 11 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 12
Rear View Connections
1. DC – This connection connects to an AC adapter for powering the TV.
2. USB – USB connects to USB flash drives for playing music and picture. The
USB port is also used for updating the TV’s firmware.
3. HDMI1 – HDMI connects to devices that use HDMI cable, such as Blu-ray or
HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video.
4. HDM2 – Refer to HDMI1.
5. VGA - This connection port connects to a PC for video using VGA cable. Be
sure to connect your audio cable to the VGA Stereo input if you want sound
out of VGA video source.
6. Audio In - This connection port is for people who want to provide audio to the
TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack
audio cable.
7. SPDIF - This connection port is used for sending out digital audio signals to
digital surround sound receivers. The orange (COAX SPDIF OUT) connector
sends out either bit-stream or PCM digital sound signal to a home theater
receiver with digital coax input.
8. HEADPHONE – This connection is for headphones to be attached to the TV.
9. YPbPr – This connection port is for DVD players or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue,
and red for video, and then connect white for left channel audio, and red for
right channel audio. Please Note: audio is shared with Video port.
- 12 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 13
10. Video – Video connects to devices that use composite video cables such as
VCR or DVD player or Wii™. Connect the yellow for video and the red / white
for audio. Please Note: audio is shared with YPbPr port.
11. LR – These two connections are audio connection for either YPbPr or Video
port.
12. TV – This connection is for digital or analog cable without the cable box or
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check http://www.antennaweb.org.
Please Note:
This TV features a power saving function which will turn off the TV
automatically after 5 minutes of idling on a connection with no signal.
This feature is present on all connection.
Installing Batteries to the Remote Control
Please insert the AAA batteries into the remote control. Make sure the (+) side and the (-) side
are installed correctly. When you are installing the battery, the remote’s backside should be
facing up. Afterwards, re-attach the battery cover.
Please note:
Only use AAA batteries.
Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire
risk or lead to personal injury.
Dispose the batteries in accordance with local laws and regulations.
Keep the batteries away from children and pets.
If the remote control is not used for a long time, remove the batteries.
Keep the remote control away from moisture, sunlight, and high temperatures.
- 13 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 14
SCEPTRE TV Remote Control
- 14 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 15
For universal remotes, this TV follows SONY’s universal remote code. You need
to find the actual code from your cable or satellite or universal remote provider.
GENERAL TV FUNCTION BUTTONS
1. POWER – Turns the TV on or off.
2. SOURCE – Press this button to cycle through the INPUT source.
3. CC – Cycles between different closed captioning modes.
4. MTS – Selects stereo, mono, or second audio programming.
5. MUTE – Turns the sound off from the TV. To unmute either press VOL(+) or press the MUTE
6. NUMBER BUTTONS (0-9) – Press 0-9 to select a TV channel directly when you are watching TV.
7. (-)– Inserts the dash for selecting digital channels directly.
8. R – Returns to the previous channel. For switching DVD chapters over 100 the R button acts as
9. GUIDE – Opens the current digital channel information guide (antenna only).
10. INFO – Shows the display info.
11. ▲/▼/◄/►/ENTER – These directional buttons allow you to move around in the TV’s menu and
12. MENU – Brings up the main TV menu on the screen.
13. EXIT – Exit the main TV menu on the screen.
14. VOL(+)/VOL(-) – Press the VOL buttons to increase or decrease the sound level.
15. ASPECT – Selects different viewing modes of the TV.
16. FREEZE – Press this button to freeze the picture on the screen.
17. SLEEP – Turns the TV off in a specific set of time dependent on your selection.
18. CH(+)/CH(-) – Press the CH buttons to go through the channel list.
19. PICTURE – Selects various preset picture settings.
20. SOUND – Selects various preset sound settings.
21. FAVORITE – Gives you, the favorite channels list.
22. ADD/DEL – This button adds or deletes a channel from the favorite channels list.
DVD FUNCTION BUTTONS
23. AUTO EJECT – Press this button to open or close the DVD player.
24. D.MENU – Shows the menu of the DVD disc.
25. DVD – Press this button to go to the DVD source.
26. USB – Launches the USB reader function for the pictures and music.
27. ►/║ – Play/pause button in DVD mode.
28. ■ – Stop button in DVD mode.
29. REPEAT – Press this button for repeat the program.
30. AB – Press this button for repeat play point A and B
31. PREVIOUS CHAPTER – Press this button to select the DVD’s previous chapter.
32. REWIND – Press this button to reverse the DVD movie to a previous scene.
33. FAST FOWARD – Press this button to fast forward the DVDto the next scene.
34. NEXT CHAPTER – Press this button to select the DVD movie’s next chapter.
35. D.SETUP – Press this button to setup the disc in DVD mode.
36. TITLE – Press this button to go to the title menu if the DVD you’re watching has a title page.
37. SUBTITLE – Displays the subtitle.
38. AUDIO – Press to select TV sound option.
Please Note:
button again.
The channel will change after 2 seconds. For switching DVD chapters over 100 the 0 button acts
as the 100 button, so press the 0 button twice to get that chapter.
the 100+ button, so press the R button and the number you want to switch to. For example for
chapter 125 you would press R and 2 and 5 for the combination of 125.
the DVD’s menu. Press the ENTER button when you want to select a particular option.
To insert, eject a disc from the DVD player, to use any functions on the DVD
you must press the DVD button first.
- 15 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 16
Connection Suggestions
If You Have Digital Cable without Cable Box or Antenna…
1. Make sure the power of HDTV is turned off.
2. Connect the Coaxial RF cable from your antenna or digital cable to the
TV port on the back of your HDTV.
3. Turn on the HDTV.
4. Follow the first time on screen instructions.
Please Note :
Not all broadcasts are in High Definition (HD). Please refer to your
local broadcasting stations for more information.
The HDTV’s tuner is designed for HDTV therefore requires a
stronger signal than normal TVs. If you cannot achieve that signal
level with your antenna or cable, your HDTV might lose picture or
sound.
- 16 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 17
Connecting Blu-ray DVD Player with Component YPbPr…
1. Make sure the power of HDTV and your Blu-ray DVD player is turned off.
2. Obtain a Component Cable. Connect the green color connector to both your Blu-ray
DVD player and YPbPr’s green connector port on the back of your HDTV.
3. Connect the blue color connector to both your Blu-ray DVD player and YPbPr’s blue
connector port on the back of your HDTV.
4. Connect the red color connector to both your Blu-ray DVD player and YPbPr’s red
connector port on the back of your HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both your Blu-ray DVD
player and YPbPr’s white connector port on the back of your HDTV.
6. Connect the red color connector to both your Blu-ray DVD player and YPbPr’s red
connector port on the back of your HDTV.
7. Turn on the HDTV and your Blu-ray DVD player.
8. Use the remote control’s source button or the source button on the TV to switch to
YPbPr.
Please Note :
Sometimes Blu-ray DVD players will not automatically output to YPbPr. You
will need to configure your Blu-ray DVD player with AV connection first then
switch to YPbPr. Please reference the Blu-ray DVD player’s manual, to
make sure the Blu-ray DVD player is configured to output correctly to the TV.
If you use this connection, you will not be able to use the yellow
colored VIDEO connection with audio because the red and white audio
connections are shared.
- 17 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 18
Connecting Wii™ with Composite…
1. Make sure the power of HDTV and your Wii™ is turned off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to both
your Wii™ and AV’s Yellow Video connector port on the back side of your
HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to both your
Wii™ and AV’s white connector port on the back side of your HDTV.
4. Connect the red color connector to both your Wii™ and AV’s red connector
port on the back side of your HDTV.
5. Turn on the HDTV and your Wii™.
6. Use the remote control’s source button or the source button on the TV to
switch to AV.
Please Note :
Make sure to read your Wii™ installation guide for further
information.
If you are using this current connection then the YPbPr
connection will not have audio because the red and white
audio connection is shared with this port.
- 18 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 19
Connecting Cable or Satellite boxes with HDMI…
1. Make sure the power of HDTV and your set-top box is turned off.
2. Connect a HDMI cable to the HDMI output of your set-top box and the other
end to the HDMI port on the back of your HDTV.
3. Turn on the HDTV and your set-top box.
4. Use the remote control’s source button or the source button on the TV to
switch to HDMI.
Please Note :
Please reference the set-top box’s manual, to make sure the set-
top box is configured to output correctly to the TV.
Sceptre’s HDTV supports SONY’s universal remote code.
Please look up SONY’s codes in your universal remote’s hand
book.
- 19 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 20
Connecting to a PC with VGA and 3.5 mm minijack …
1. Make sure the power of HDTV and your PC is turned off.
2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the
other end to the VGA port on the back of your HDTV.
3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end
to the VGA Stereo Input port.
4. Turn on the power of the HDTV and your PC.
5. Use the remote control’s source button or the source button on the TV to switch to
VGA.
6. Change your PC resolution to 1920x1080 at 60hz refresh rate.
7. Press MENU to use the OSD’s SETUP option.
8. Under the SETUP option select PC function.
9. Under VGA function use AUTO ADJUST to adjust the screen.
Please Note :
For the best results, please set your PC resolution to 1920x1080 at 60
Hz. Please refer to the PC or graphic card’s manual for further
instructions on how to set your resolution and refresh rate.
Please refer to your PC manual for video output requirements of the
video card.
The VGA port of the TV features a power saving mode which will
automatically turn off the TV, if there’s no signal provided for more than
5 minutes.
- 20 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 21
Connecting a Digital Audio Receiver with Coax SPDIF…
1. Make sure the power of HDTV and your receiver is turned off.
2. Obtain a coax SPDIF cable, connect it to your receiver’s coax SPDIF digital
input and the coax SPDIF connection on the LINE OUT port on the back of
the HDTV.
3. Turn on the HDTV and your receiver.
Please Note :
If you want pure digital stream for your receiver to decode, you
must also configure the TV’s OSD Sound->Digital Audio Out
function. Make sure the option is on 5.1CH.
If your receiver is making static noises when receiving 5.1CH, you
must use the PCM option instead.
Please reference the receiver’s manual as well, to make sure the
receiver is configured to receive signals correctly from the TV.
The TV’s SPDIF out for 5.1CH is ONLY used for antenna/cable
connection. Any other incoming audio signal (including the
built in DVD player) will be passed out of SPDIF in PCM format.
- 21 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 22
Switching Sources
1. Press the S button on side of the HDTV or the SOURCE button on
the remote control and you will see the picture above.
2. Use ▲▼ buttons to select the source you want to switch to and
press the ENTER button in the middle of the ▲▼ buttons.
- 22 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 23
Ready to Watch Some TV?
Starting up the HDTV
1. Make sure your power cable is connected and the standby red light
in the front of the HDTV is lit up.
2. Check all your connection cables off the side or the back of your
HDTV and also your AV devices. Make sure they are all connected
securely.
3. Turn on your HDTV and other AV devices if necessary.
4. Select the correct source according to the Connecting pages.
If You’ve Connected Antenna or Cable to the HDTV…
If an antenna or cable (without a cable box) is connected to your HDTV’s
tuner, you will need to go through an INITIAL SETUP process in order to
watch the HDTV.
1. Press MENU to open the menu
2. Use the ◄ or ► button to select the CHANNEL icon and press
ENTER.
- 23 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 24
3. Use the ▲ or ▼ buttons to highlight the signal type and press ◄ or
► to select your connection either AIR or CABLE.
4. Use the ▲ or ▼ buttons to select AUTO CHANNEL SEARCH and
press ENTER to scan for channels.
5. Once the scanning finishes, you can begin to watch HDTV.
Please Note:
Not all broadcasts are in High Definition (HD). Please refer
to your local broadcasting stations for more information.
The HDTV’s tuner is designed for HDTV therefore requires a
stronger signal than normal TVs. If you cannot achieve that
signal level with your antenna or cable, your HDTV might
lose picture or sound.
- 24 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 25
OSD (On Screen Display) Controls
Via Remote Control
In order to adjust most of the options inside the On Screen Display (OSD), the picture
below shows all the buttons used on the remote control.
– This button opens the
OSD and also exits the OSD
by going to the previous
level of the OSD.
– This button exits the OSD
entirely.
Via TV Side Panel Buttons
In order to provide more than one type of OSD control buttons, the side panel’s buttons have also
been made functional for adjusting the OSD.
1. VOL(+/-) – These buttons functions as left/right direction in the OSD or
increases/decreases the value of an option.
2. CH(+/-) – These buttons functions as up/down direction in the OSD.
3. MENU – This button opens the OSD and also exits out of menus.
4. SOURCE – This button acts as the enter button to enter each function or
option.
▲ – This button functions as up
direction in the OSD.
▼ – This button functions as down
direction in the OSD.
◄ – This button functions as left
direction in the OSD.
► – This button functions as right
direction in the OSD.
ENTER – This button changes the
channel in conjunction with the
number pad and also functions as
ENTER for selecting options in the
OSD.
- 25 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 26
OSD (On Screen Display) Options
PICTURE – This main option has functions for changing the picture settings for all ports,
such as tint, contrast, sharpness.
SOUND – This main option has functions for changing sound settings for all ports, such
as SPDIF Type, treble, bass, and acoustic cinema enhancement….etc.
CHANNEL – This main option has functions for the tuner port, such as scanning
channels, editing channels, specific range scans, audio language, tuner mode….etc.
PARENTAL – This main option has functions for only composite and TV port. The
purpose of this option is to block TV inappropriate for children.
SETUP – This main option has functions for all ports, OSD language, caption styles,
time setup, automatic synchronization, sleep timer and power on timer, power off timer.
OTHERS – This main option has functions for all ports, OSD language, caption styles,
time setup, automatic synchronization, sleep timer and power on timer, power off timer.
PICTURE
This option allows users to adjust the TV’s picture sharpness, color, tint, and other
various functions.
- 26 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 27
1. Press MENU to open the OSD.
2. Press ◄ or ► to select PICTURE and press ENTER.
3. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to
adjust them.
I. PICTURE SETTINGS
i. PICTURE MODE – This feature changes various color
modes for the TV.
ii. BRIGHTNESS – This feature changes the picture’s detail
in dark colors.
iii. CONTRAST – This feature changes the difference
between dark and bright objects.
iv. COLOR – This feature changes the amount of color in
the picture.
v. TINT – This feature changes the white balance of the
color.
vi. SHARPNESS – This feature changes the picture quality.
II. SCREEN SETTINGS
- 27 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 28
i. SCREEN SIZE – This feature changes the various
aspects of the TV’s video. (Aspects include water glass,
zoom, full, normal. Water glass shows the image like a
fisheye effect where the middle is proportionate
while the sides are stretched. Under PC VGA there
are only full and dot by dot mode.
ii. AUTO WIDE – This feature will automatically widen
analog pictures with black bars.
iii. HDMI PC – This feature will map pixel to pixel for HDMI
PC resolution without scaling giving your PC graphics a
crisp sharp graphics directly from the computer. *This
feature can only be used when a computer with HDMI
III. PC SETTINGS
IV. COLOR TEMPERATURE – This feature adjusts the color temperature
of the TV, giving warm, normal, cool, (warm being more red, cool being
more blue and normal being neutral color).
cord is connected to the TV.*
i. AUTO ADJUST – This feature automatically adjusts the
picture syncing in with the signal of the PC.
ii. HORIZONTAL POSITION – This feature adjusts the to
the left or right position of the PC picture.
iii. VERTICAL POSITION – This feature adjusts the up or
down position of the PC picture.
iv. CLOCK – This tunes in large increments the picture
quality of the PC picture.
v. PHASE – This tunes in small increments the picture
quality of the PC.
vi. RESET – This resets the settings of PC settings.
- 28 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 29
V. ADVANCE PICTURE SETTINGS
i. DYNAMIC CONTRAST – This feature allows the TV to
automatically adjust the contrast of the TV depending on
the picture you are viewing.
ii. FILM MODE – This feature is 24p that syncs with DVD
movies, and should be enabled when viewing DVD video
to allow smoother frame rate.
iii. NOISE REDUCTION – This feature reduces general
pixilation by blurring them.
iv. MPEG NOISE REDUCTION – This feature reduces DVD
video pixilation by blurring them.
Please Note:
FILM MODE only works with external DVD players. The built in DVD
player does not work with this function.
- 29 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 30
SOUND
This option allows users to adjust the TV’s sound functions.
1. Press MENU to open the OSD.
2. Press ◄ or ► to select SOUND and press ENTER.
3. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to
adjust them.
I. SOUND SETTINGS
i. SOUND MODE – This feature switches between preset
settings (presets include standard, soft, user, and
dynamic).
ii. BASS – This feature adjusts the audio bass level of the
TV.
iii. TREBLE – This feature adjusts the audio treble level of
the TV.
- 30 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 31
iv. BALANCE – This feature adjusts the balance between
II. SURROUND MODE – This feature enables the TV two speakers to
provide a wider sound effect.
III. ANALOG SOUND – This feature adjusts the second audio
programming in analog channels.
IV. DIGITAL SOUND – This feature adjusts the digital second audio
programming in digital channels.
V. OTHER SETTINGS
VI. EQUALIZER SETTINGS – This feature enables the internal
equalizer of the speakers. You can adjust the settings individually
or use the presets (user, off, rock, pop jazz).
the two speakers moving sound from left to right.
i. AVL – This feature adjusts the auto volume leveler
enabling volume protection from overly loud commercials.
ii. SPEAKER – This feature turns the speakers on or off.
iii. DIGITAL AUDIO OUTPUT – This feature adjusts the
digital audio output.
- 31 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 32
CHANNEL
This option allows user to adjust the TV’s tuner functions.
1. Press MENU to open the OSD.
2. Press ◄ or ► to select CHANNEL and press ENTER.
3. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to
adjust them.
I. CHANNEL LIST – This feature gives you the list of channels
currently found by the TV.
II. FAVORITE LIST – This feature gives the favorite list of channels
added by you.
- 32 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 33
III. CHANNEL SETTING
i. CHANNEL NUMBER – This feature shows the channel
number.
ii. IN CHANNEL LIST – This feature tells you if you have
chosen for channel to be skipped.
iii. CHANNEL LABEL – This feature changes the name of
the channel.
iv. FAVORITE CHANNEL – This feature tells you if you
have the current channel in your favorite list.
IV. SIGNAL TYPE – This feature allows you to switch between air
(such as using antenna) and cable.
V. AUTO CHANNEL SEARCH – This feature searches channels
automatically for you.
Please Note:
Second audio programming is dependent on the support of the TV
station you are watching. If they do not have a second audio
programming (SAP), this function will not work.
- 33 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 34
PARENTAL
This option allows users to filter TV programs and movies while using the TV tuner. To
use this option you will need to enter in the password first.
1. Press MENU to open the OSD.
2. Press ◄ or ► to select PARENTAL CONTROL and press ENTER.
3. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to adjust them.
Please Note:
I. LOCK PARENTAL CONTROL – This feature allows you to input a password
in order to access the other features. (The default password is “0000”)
II. V-CHIP – This feature blocks shows under the TV tuner.
i. US V-CHIP
a) MOVIE RATING – This feature blocks movies.
b) TV RATING – This blocks shows based on TV ratings.
ii. CANADA V-CHIP
a) ENGLISH RATING – This blocks English TV shows in
Canada.
b) FRENCH RATING – This blocks French TV shows in
Canada.
iii. BLOCK UNRATED SHOW – This blocks TV shows with no
ratings supplied.
iv. DOWNLOADABLE RATING – This is a feature under the new V-
chip where ratings can be downloaded from the channel.
v. CLEAR DOWNLOADABLE DATA – This feature clears the
downloaded ratings data.
III. CHANGE PASSWORD – This feature changes the password of the parental
control function.
IV. FRONT PANEL LOCK – This feature locks the buttons on the TV from
functioning.
V. SOURCE LOCK – This feature locks different sources from working.
Please refer to RATINGS EXPLAINED for more information on ratings definitions.
Downloadable rating and clear downloadable data might be grayed out
depending on the TV stations support.
- 34 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 35
SETUP
This option allows user to adjust the TV’s miscellaneous options.
1. Press MENU to open the OSD.
2. Press ◄ or ► to select SETUP and press ENTER.
3. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to adjust them.
I. CLOSED CAPTION – This provides your TV tuner, AV ports with subtitles.
i. CAPTION DISPLAY – This turns on or off the closed captioning.
ii. ANALOG CAPTION TYPE – This chooses the subchannel that
supplies the closed captioning. For United States, usually the
setting is CC1. TEXT1-4 displays advertisements of the channel.
iii. DIGITAL CAPTION TYPE – This chooses the subchannel for
digital channel closed captioning.
iv. DIGITAL CC PRESET – This unlocks users ability to change
caption styles.
v. DIGITAL CC STYLE – This feature changes caption options of
digital closed captioning.
a) CC SIZE – This changes the size of the text.
b) CC FONT – This changes the text font style.
- 35 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 36
Please Note :
Closed captioning is only available under AV, S-Video, and TV ports.
Closed captioning depends on your TV program’s support. Sometimes due to the
In United States, closed captioning under analog signals is CC1.
In United States, closed captioning under digital signal is Service1.
TEXT1-TEXT4 offers you local information; however it might not be support
c) CC OPACITY – This changes the transparency of the
captioning.
d) CC COLOR – This changes the color of the text.
e) CC BACKGROUND OPACITY – This changes the
transparency of background of the text.
f) CC BACKGROUND COLOR – This changes the color
of the background.
II. MENU LANGUAGE – This function adjusts the language of the menu
(English, French, Spanish).
III. CLOCK
i. TIME ZONE – This adjusts the time zone for the TV’s clock.
ii. AUTO CLOCK – This feature sets the TV to the TV channel’s
clock. (You must have antenna to use this feature.)
iii. SETUP TIME – This feature manually lets you adjust the time
and date.
iv. DAY OF THE WEEK – This feature tells you the day of the week.
TV channel or the signal, closed captioning will not be available.
by your local broadcasting station. When no information is offered, you will
see a large black box in the middle of the screen.
- 36 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 37
OTHERS
This option allows users to set other features of the TV.
1. Press MENU to open the OSD.
2. Press ◄ or ► to select OTHERS and press ENTER.
3. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to
adjust them.
I. BLUE BACK – This feature gives the TV a blue default background
when there is no signal.
II. NO SIGNAL POWER OFF – This feature turns the TV off if there is
no signal given to the TV after a certain time.
III. NO OPERATIONS POWER OFF – This feature turns the TV off if
there are no commands given to the TV after a certain time.
IV. ALL RESET – This reset all the options in the MENU back to it’s
default values.
- 37 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 38
Detailed Explanations
USB Connection Explained
The TV is a widescreen TV with an USB port. With the USB port the TV can access USB flash
drives (up to 2GB) and display pictures or play MP3 files. To use this feature connect a USB flash
drive to the USB port of the TV and press the USB button to start browsing for music and pictures.
Browsing
In the USB function, for browsing pictures, you will need to create a folder inside the USB drive with
the name DCIM. Inside the DCIM folder you will need to create another folder in the format of
###_XXX. The ### represents numbers and the XXX represents characters.
- 38 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 39
When you plug the USB in you will see the following menu. Please follow the directions on the
screen to browse the USB drive.
Media Browser – This allows users to browse media and photo in the USB drive.
Settings – This changes the settings of accessing the USB drive.
MP3 Control – This enables the remote control to control the MP3 playing options.
Technical Limitation
1. The USB port does not support USB hubs.
2. The USB flash drive supports FAT32 and FAT16 file system only.
3. The biggest file size is 4 gigabyte (FAT32).
4. The picture function only supports JPEG file (baseline only, progressive is not
supported).
5. The music function only supports MP3 that is from 32-48khz using a data rate of
32-320 kbps.
6. All USB functions are operated by the remote control. None of the buttons physically
located on the TV will respond to USB functions.
- 39 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 40
Closed Captioning (digital and analog) Explained
Your TV is equipped with an internal Closed Caption decoder. It allows you to view conservations,
narration and sound effects as subtitles on your TV. Closed Captions are available on most TV
program, and on some VHS home video tapes, at the election of the program provider.
CC – Press this button to enable the CC function. You can then use the ▲▼ buttons to select if you
want CC off or CC on. You can use the ◄► buttons to select between different CC channels.
Please Note:
Digital Closed Caption service is a new caption service available on digital TV programs
(also at the election of the service provider). It is a more flexible system than the original
Closed Caption system, because it allows a variety of caption sizes and font styles.
Not all programs and VHS video tapes offer closed caption. Please look for the CC
symbol to ensure that captions will be shown.
In the Closed Caption system, there can be more than one caption service provided.
Each is identified by its own number. The CC1 and
CC2 services display subtitles of TV programs superimposed over the program’s picture.
In the Closed Caption system, the TEXT1 or TEXT2 services display text that is
unrelated to the program being viewed (e.g., weather or news). These services are also
superimposed over the program currently being viewed.
Closed Captioning for this TV only works under sources TV, and VIDEO.
Rating Explained
General Operation
To block channels you don’t want your children to watch, you can filter them with the ratings function.
MPAA lets you control ratings for movies. For regular TV programs you can use USTV settings.
USTV settings lets you filter what content you want at each age level, TV-Y, to TV-MA (refer to
definitions below). Below are definitions for each setting.
USTV Rating
TV-Y (USTV) – For All Children
This program is designed to be appropriate for all children. Whether animated or live-action, the
themes and elements in this program are specifically designed for
a very young audience, including children from ages 2-6. This program is not expected to frighten
younger children.
TV-Y7 (USTV) – Directed to Older Children
This program is designed for children age 7 and above. It may be more appropriate for children who
have acquired the developmental skills needed to distinguish between make-believe and reality.
Themes and elements in this program may include mild fantasy violence or comedic violence, or
may frighten children under the age of 7. Therefore, parents may want to consider the suitability of
this program for their very young children. Note: For those programs where fantasy violence may be
more intense or more combative than other programs in this category, such programs will be
designated TV-Y7-FV.
- 40 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 41
TV-G (USTV) – General Audience
Most parents would find this program suitable for all ages. Although this rating does not signify a
program designed specifically for children, most parents may let younger children watch this
program unattended. It contains little or no violence, no strong language and little or no sexual
dialogue or situations.
TV-PG (USTV) – Parental Guidance Suggested
This program contains material that parents may find unsuitable for younger children. Many parents
may want to watch it with their younger children. The theme itself may call for parental guidance
and/or the program contains one or more of the following: moderate violence (V), some sexual
situations (S), infrequent coarse language (L), or some suggestive dialogue (D).
TV-14 (USTV) – Parents Strongly Cautioned
This program contains some material that many parents would find unsuitable for children less than
14 years of age. Parents are strongly urged to exercise greater care in monitoring this program and
are cautioned against letting children under the age of 14 watches unattended. This program
contains one or more of the following: intense violence (V), intense sexual situations (S), strong
coarse language (L), or intensely suggestive dialogue (D).
TV-MA (USTV) – Mature Audience Only
This program is specifically designed to be viewed by adults and therefore may be unsuitable for
children under 17. This program contains one or more of the following: graphic violence (V), explicit
sexual activity (S), or crude indecent language (L).
TV program description
FV - Fantasy Violence
V - Violence
S - Sexual Situations
L - Adult Language
MPAA Rating
G (MPAA)
General audiences. All ages admitted.
PG (MPAA)
Parental guidance suggested. Some material may not be suitable for children.
PG-13 (MPAA)
Parents strongly cautioned. Some material may be inappropriate for children under 13.
R (MPAA)
Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some
juridictions).
NC-17 (MPAA)
No one 17 and under admitted.
X (MPAA)
X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.
D - Sexually Suggestive Dialog
- 41 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 42
Aspect Ratio Explained
The TV is a widescreen TV, but most TV programs are still broadcasting in a square format,
therefore the TV is offering multiple ways of viewing videos. There are mainly two types of signal
format, Full (16:9 format), Normal (4:3 format), while others offer a novelty ways to view the TV.
Simply use the ASPECT button on the TV’s remote control to cycle between the multiple modes.
1. FULL
This mode will stretch the picture to a widescreen ratio. If you have a perfect 16:9 ratio picture
you will not see any black bars. If you are watching a widescreen movie in 1.85:1 or 2.35:1
ratio, you will still get black bars on the top and bottom of the screen. If you use this mode on
4:3 pictures they will be stretched and distorted horizontally.
2. NORMAL
Most analog TV channels have 4:3 signal formats. If the original 4:3 aspect ratio (1.33:1
source) is preserved, black bars are added to the left and right of the display image. This
aspect keeps that aspect ratio and shows you the black bars on the side.
- 42 -
www.SCEPTRE.com
SCEPTRE E230BD-FHD HDTV User Manual
Page 43
3. Zoom
When watching a 4:3 aspect ratio TV or movie, this mode zooms in to cut off most of the black
bars on the side while preserving the 16:9 ratio. Because of the zoom, the top and bottom are
cut off as well.
4. WATERGLASS (panorama)
When watching a 4:3 aspect ratio TV or movie, there will be black bars on the side, you can
remove this by using 16:9 aspect but the entire picture will be distorted horizontally. This
mode will only distort the two sides of the TV (where the black bars used to be) but in the
center the picture will still be proportional. This mode will fill the entire screen but most of your
picture will be proportional. Please Note : When in HD mode aspect ratios will not work
because it is controlled by the signal.
- 43 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 44
Shortcuts to Browsing Channels
Browsing through the entire channel list on the HDTV can be tedious. This HDTV features a favorite
channel list, where you can add in channels that you always want to watch
TO ADD / DELETE TO THE FAVORITE LIST
1. Go to the channel you want to add or delete.
2. Press the ADD/DEL button to add or delete the channel from the list.
BROWSING CHANNELS WITH THE FAVORITE LIST
1. Press the FAVORITE button, and the list of channels you have added will be
in a window.
2. Use the ▲ or ▼ buttons to select the channel you want to jump to and press
ENTER to confirm.
- 44 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 45
DVD OPERATION
Introduction
About the ○/ Symbol Display
“○/” may appear on your HDTV display during operation, which indicates that the function in this
operating instruction is not available for that specific media format.
Notes On Discs
Handling Discs
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints d not get
on the surface. Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before
playing, clean the disc with a clean cloth. Wipe the disc from the center out. Do not use strong
solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static spray
intended for old vinyl records.
Moisture Condensation
Never operate this product immediately after moving it from a cold location to a warm
location. Leave it for two or three hours without operating it. If you use this product in
such a situation it may damage the discs or internal parts.
Supporting DVD Format
This product can play the following DVD formats disc.
DVD/DVD+/-R DVD+/-RW
CD/CD+/-R/CD+/-RW
VCD/CDG
- 45 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 46
Important DVD Operation Guidelines
1. The DVD drive only functions while the TV is under the source DVD. In order
to put the DVD disc in, or eject the DVD disc, you must be under the DVD
source. Otherwise the DVD drive will not work.
To be under source DVD either press the DVD button or press the
SOURCE button then select DVD.
2. With the TV turned on and the DVD button pressed from the TV remote, you
can now insert the DVD disc you want to play. When you are facing the
front of the TV, insert the DVD disc with the side that is labeled with the
movie title facing away from you.
- 46 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 47
3. The DVD control buttons are show in the picture below.
- 47 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 48
4.
1. System Setup Menu
a. Press the D.SETUP button and then press the ◄/► to display the system
setup menu page when you are in DVD mode.
b. Press the ▲/▼ button to select options in the menu.
c. Press the ► button to enter menus or options and use the ▲/▼ button to
select suboptions.
d. Press the ENTER button to confirm.
e. Press the D.SETUP to exit the DVD setup menu.
1) TV SYSTEM – This option should be set to NTSC only.
2) SCREEN SAVER – This option turns on the DVD screen saver.
3) TV TYPE – This option should be set to 16:9 only.
4) PASSWORD – This option password protects the system menu.
5) RATING – This option sets parental rating lock on DVD discs.
6) POWER RESUME – This option lets users resume their movies from
where they last left off.
7) DEFAULT – This option restores settings to default options.
2. Language Setup Menu
a. Press the D.SETUP button and then press the ◄/► to display the language
setup menu page when you are in DVD mode.
b. Press the ▲/▼ button to select options in the menu.
c. Press the ► button to enter menus or options and use the ▲/▼ button to
select suboptions.
d. Press the ENTER button to confirm.
e. Press the D.SETUP to exit the DVD setup menu.
1) OSD LANGUAGE – This option changes the language of the on
screen display.
2) AUDIO LANG – This option selects your preference for your DVD
movie audio.
3) SUBTITLE LANG – This option selects your preference for your
DVD movie subtitle language.
4) MENU LANG – This option selects your preferred DVD menu
language.
- 48 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 49
Please Note:
Audio Lang, Subtitle Lang, Menu Lang are only preferences. If the DVD
disc does not support the language, the preferred language will not be
played.
3. Audio Setup Menu
a. Press the D.SETUP button and then press the ◄/► to display the audio
setup menu page when you are in DVD mode.
b. Press the ▲/▼ button to select options in the menu.
c. Press the ► button to enter the menus or options and use the ▲/▼ button to
select suboptions.
d. Press the ENTER button to confirm.
e. Press the D.SETUP to exit the DVD setup menu.
1) TONE – This option selects the audio tone played from a DVD disc.
- 49 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 50
4. Digital Setup Menu
a. Press the D.SETUP button and then press the ◄/► to display the digital
setup menu page when you are in DVD mode.
b. Press the ▲/▼ button to select options in the menu.
c. Press the ► button to enter menus or options and use the ▲/▼ button to
select suboptions.
d. Press the ENTER button to confirm.
e. Press the D.SETUP to exit the DVD setup menu.
Please Note:
This DVD player only takes standard size DVD discs. Mini DVDs, odd
1) DYNAMIC RANGE – This is an option that changes the quality of
audio from DVD discs.
2) DUAL MONO – This option selects the sound channel of your
preference.
shaped DVDs are not compatible.
- 50 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 51
How do I clean the TV ?
IMPORTANT
Cleaning the bezel and remote control
Cleaning the Screen
1. The power cable has to be removed from the socket before cleaning the
TV.
2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the TV.
These types of chemicals might damage the housing and the LCD glass.
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. If the remote control or bezel is dirty to the point where you cannot
simply dry wipe it, please lightly dampen the wiping material (the wiping
material cannot be dripping wet, because if water drips into the
panel it will cause malfunction and possible permanent damage to
the panel which will not be covered under the warranty) with clean
water and wipe again. Wipe the display with a dry micro-fiber cloth or
100% cotton cloth afterwards.
Please Note :
Make sure you wring the water out of the cloth before
cleaning the bezel or remote in order to prevent water
from penetrating into the electronics.
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. The LCD screen glass is extremely fragile. Do not scrape it with any
material. Do not press or tap the screen to avoid cracking. When the
screen is dirty to the point where you cannot simply dry wipe it, please
lightly dampen the wiping material with clean water and wipe again.
Wipe the display with a dry micro-fiber cloth or 100% cotton cloth
afterwards.
- 51 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 52
Problems
Solutions
NO PICTURE
Connect power cord correctly.
Turn on power.
Connect video cable correctly.
Select the input signal source with proper cable connection with
the source button.
ABNORMAL
COLORS
Match the colors on the cables to the ports off the back of the
television. I.E. red cable to red colored port.
PICTURE IS TOO
DARK
Adjust your contrast, brightness and lamp settings from the
OSD Menu. For adjust controls, refer to page 27.
AUDIO ONLY NO
PICTURE
Make sure you have connected both your video and audio
cables.
The TV’s tuner signal must not be lower than 65 %.
PICTURE ONLY NO
AUDIO
Make sure the audio cable is connected.
Readjust your volume via the remote control.
The TV’s tuner signal must not be lower than 65 %.
REMOTE CONTROL
DOES NOT WORK
Turn off the TV, unplug it from the socket. Remove the
batteries out of the remote for 30 minutes. Press the remote
buttons and the power button randomly for a good 2 seconds,
and then reinstall the batteries. Try the remote to see if it
works. For battery removal instructions, refer to page 13.
The TV’s remote sensor is also housed in the same place as
the power indicator light. Please make sure there is line of sight
from the remote control’s front sensor to the remote sensor of
the TV.
CANNOT RECEIVE
SUFFICIENT
CHANNELS
THROUGH THE
ATSC/NTSC TUNER
The TV’s tuner signal must not be lower than 65 %. Change
the direction of your antenna and rescan your channels. If you
have cable call up your cable company and ask about signal
strength of your local cable.
NO COLOR
Please adjust your picture setup and make sure the saturation
and the RGB are not turned all the way down. For adjustment
controls refer to page 27.
The TV’s tuner signal must not be lower than 65 %. Check your
signal.
WEAK SIGNAL OR
NO PROGRAM
SYMBOL ON
SCREEN
The TV’s tuner signal must not be lower than 65 %. Change
the direction of your antenna and rescan your channels. If you
have cable call up your cable company and ask about signal
strength of your local cable.
TV’S UNIVERSAL
REMOTE CODE
This television follows SONY’s universal remote code. To
find the actual code you must read through your own
universal remote’s guide book.
Troubleshooting
The following table contains the common problems and the solutions to these
problems. Please check this list before you contact the technicians.
- 52 -
www.SCEPTRE.com
SCEPTRE E230BD-FHD HDTV User Manual
Page 53
Problems
Solutions
TV CHANNELS ARE
BLOCKED
Check your auto lock function’s settings inside the OSD. You
may have locked up some channels but forgot about them.
Refer to page 34 for more instructions.
UNIVERSAL
REMOTE CODE
This TV follows SONY’s universal remote code. Please check
your hand book for SONY’s codes then apply them.
THE TV TURNS ON
OR OFF SLOWLY
AND THE SCREEN
SHOWS UP
SLOWLY
This TV is a High Definition liquid crystal display panel TV. It
requires a few more seconds than normal TVs to power up and
show the picture.
NO SOUND ON PC
Make sure you have a 3.5 mm mini-jack cable connected from
your pc’s sound output to the TV’s VGA STEREO INPUT.
HDCP VIDEO SAYS
NO HDCP SUPPORT
Reboot your HDCP video device but turning them off and
unplugging the power cord. Wait up to 8 minutes to plug the
power back in to see if it works or not.
HDCP VIDEO HAS
NO AUDIO
Make sure you have a 3.5 mm mini-jack cable connected from
your HDCP video device’s sound output to the TV’s VGA
STEREO INPUT. If your HDCP video device uses RCA AUDIO
jacks, you’ll need to obtain a RCA audio converted into 3.5 mm
mini-jack cable.
CANNOT GET
1360X768 ON PC
VGA
Make sure the TV is recognized as plug and play monitor. Try
updating your video card’s drivers as well. If that does not help,
most likely you’ll need to upgrade your video card to a newer
one.
PICTURE IS
DISTORTED OR
HAS ABNORMAL
SOUND
This might be from interference from large electrical appliances,
cars, motorcycles, or fluorescent lights. If the TV is close to the
wall, try moving the TV to another room in your house to see if
the problem still occurs.
PICTURE DOES
NOT COVER THE
ENTIRE SCREEN
If you’re using HDMI or a TV digital channel make sure you use
the ASPECT button to switch to 16:9 format. If you are using
VGA, use the AUTO ADJUST function to adjust to the screen.
Please Note : If you are using regular analog TV, AV, or
component in 480i resolution, use the ASPECT button to switch
to 16:9 in order to fill up the screen. Please Note : This note
this feature will distort the picture.
PICTURE QUALITY
IS HORRIBLE!!
For best image quality, view HD widescreen programs where
possible. If HD content is not available view “Standard
Definition” from a digital source. Standard, analog TV will
always be noticeable inferior to HD because your TV has video
that is many times better than old TV’s and so you can see
interference and deficiencies you did not KNOW you had.
PICTURE HAS
PIXELS THAT ARE
ALWAYS
DISPLAYING THE
SAME COLOR
Your TV is manufactured using an extremely high level of
precision technology, however, sometimes some pixels of your
TV may not display. Pixels defects within industry specifications
are inherent to this type of product and do not constitute a
defective product.
I CANNOT CHANGE
THE TIME
MANUALLY
Your TV syncs time automatically according to your local TV
channel. This function only works while the TV’s tuner is
connected to an ANTENNA.
BIG BLACK BOX IN
THE MIDDLE OF
SCREEN
You have turned on closed captioning and are using TEXT1 –
TEXT4. Change the setting to CC1 or turn off closed captioning
and the box will disappear. Refer to page 40 for more
information.
- 53 -
www.SCEPTRE.com
SCEPTRE E230BD-FHD HDTV User Manual
Page 54
Problems
Solutions
SWITCHING A
CHANNEL OR
SOURCE CHANGES
THE VOLUME
Different channels and inputs will sometimes have this effect
because the channel signal’s own volume is already loud.
There is no way remove this completely. The TV has an
AUTO VOLUME LEVEL function that can combat this type of
effect. Please make sure that function is turned on.
THERE IS NOISE OR
TRASH PIXELS ON
THE SCREEN
When your TV’s resolution is higher than the digital channel’s
broadcast resolution, the signal is up-converted to match your
TV’s resolution. Up-converting can cause this type of effect.
TIPS FOR HIGH
DEFINITION USERS
The TV is an ideal platform for viewing High Definition
Content. The best image quality can be achieved by HDMI,
YPbPr (Component), then VGA. However, due to variances in
broadcast practices, it is possible some image distortions can
occur.
TIPS FOR
LETTERBOX
CONTENT USERS
Letterboxed (Widescreen) versions of DVD movies are most
commonly formatted for standard 4:3 TVs. The TV has the
capability of expanding this content so the entire screen is
filled at the expense of the image proportion. To use this
function press the aspect button on the remote control and
cycle among the available options.
I CANNOT FIND THE
VOLUME AND
CHANNEL
CHANGING
BUTTONS
The buttons are represented by the ▲▼◄► buttons located
on the remote control. ▲▼ changes the channels and ◄►
changes the volume.
TV TURNS OFF
AUTOMATICALLY
AFTER 5 MINUTES
The TV features a power saving mode which will automatically
turn off the TV, if there’s no signal provided for more than 5
minutes.
CANNOT INSERT OR
EJECT DISC
You must be in DVD source first before accessing any
DVD function. To be in DVD source press the DVD button
on your remote control.
VOLUME DOES NOT
WORK WHEN I AM
PLAYING A DVD
Press the DVD Vol. button. Afterwards you can press the
VOL (+) or VOL (-) buttons to increase or decrease
volume.
MINI DVD, ODD
SHAPE DVDS
The DVD player only takes standard size DVD discs. All
other sizes are not compatible.
THE DVD SHOWS
WRONG REGION
The DVD player only plays region 1 (USA) DVD discs.
THE DVD MOVIE
PAUSES, FREEZES.
OR STUTTERS BY
ITSELF
Check the DVD disc, make sure it is clean and clear
without scratches. A dirty or scratched DVD disc will
affect the DVD player’s playing ability.
THE DVD disc will
not play
Certain DVDR/DVDRW/DVD DL written discs by different
manufacturers will sometimes have incompatible discs.
Try another brand of blank DVDs or simply try another
blank DVD disc.
SCEPTRE E230BD-FHD HDTV User Manual
- 54 -
www.SCEPTRE.com
Page 55
Call Us If You Need Help!
Products are often returned due to a technical problem rather than a defective
product that may result in unnecessary shipping charges billed to you. Our
trained support personnel can often resolve the problem over the phone or
email. For more information on warranty services or repairs after the warranty
period, please contact our support department at the number below.
For technical help, contact our Sceptre Technical Support Group via email or
phone. Please have your Sceptre p/n number, serial number, and date of
purchase available before you call.
Tech Support E-mail : monitor-ts@sceptre.com
Customer Service Email : cs@sceptre.com
TEL : 1800-788-2878
Operation Hours : Mon - Fri at 8:30 AM – 5:30 PM (PST)
16800 East Gale Ave.
City of Industry, CA 91745
TEL : 626-369-3698
FAX : 626-855-5711
Website : www.SCEPTRE.com
- 55 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 56
Display panel
Item
Illustration
Active Area / Screen Size
Diagonal 23 inches
Aspect Ratio
Widescreen 16:9
Pixel Pitch
265.2 (H) x RGB x 265.2 (V) um per one triad
Max. of Pixels (Resolution)
FHD (1920 x 1080 pixels) resolution
Brightness
300 nits (Typical)
Contrast
1000:1 (Typical) Auto Contrast Enhancement
Response Time
5 ms (gray to gray)
Viewing Angle
Typical 170/160 Degree
(Horizontal/Vertical)
Lamp Life of Backlight
> 20,000hrs
TV DISPLAY
Dimension
23.1” x 9.84” x 17.2” (with stand)
23.1” x 1.89” x 15.27” (without stand)
Weight
9.92 lbs
Power input
DC12V 4A
Function
(1)Video
De-interlace
3D
Frame recover
3:2
Noise reducing core technology
3D
Aspect ratio
Full, Normal, WaterGlass, Zoom
Gamma
Fixed Gamma
Lamp adjust
Yes
Picture mode
Vivid / Standard / Mild / Custom
Video adjust
Brightness / Contrast / Color / Tint / Sharpness
(2)Audio
Sound Mode
Dynamic / Standard / Soft / User
Auto Volume Control
Yes
Tone
Bass / Treble / Balance
SPDIF Out
Yes (coax)
Specification
SCEPTRE E230BD-FHD HDTV User Manual
- 56 -
www.SCEPTRE.com
Page 57
Speakers
3 watt per channel
(3) General
Hybrid TV Tuner
NTSC / ATSC / QAM (Digital Cable Ready)
Channel auto scan
Yes
Sleep timer
Off / 10mins / 20mins / 30mins / 40mins / 50mins /
60mins / 90mins / 120mins
Standby power
Under 1W
Timing support-Video
480i / 480p / 720p / 1080i / 1080p
PC timing
1920*1080@60hz (NATIVE)
1024*768@60, 70, 75Hz
800*600@60, 75Hz
640*480@60, 75Hz
Multimedia Format
Audio: MP3 (32-48Khz)
Picture: JPEG (Baseline) up to 5000x5000
USB file system: FAT32/FAT16
(4)NTSC/ATSC
NTSC
Favorite Channel
V-chip
Closed caption
(CC1-CC4, Text 1-Text 4)
ATSC
Sound: Mono / Stereo / SAP
Favorite Channel
V-chip
Video input format: 1080i, 720p, 480p, 480i
Analog closed caption:
(CC1-CC4, Text 1-Text 4)
Digital closed caption:
(Service 1-Service 6)
(5)I/O
1 input x TV Tuner (NTSC/ATSC),
1 input x AV,
1 input x YPbPr,
2 inputs x HDMI/HDCP (optional, HDCP audio shared
with VGA Audio In),
1 input x VGA,
1 input x VGA Audio In,
1 input x SPDIF (digital audio) out,
1 input x Headphone out,
1 input x USB
*The product’s specifications may change without notice or obligation.
**This manual’s pictures and words are for references only and are subject to change without notice
or obligation. Sceptre Inc is not liable for the misuse or misinterpretation of this manual.
SCEPTRE E230BD-FHD HDTV User Manual
- 57 -
www.SCEPTRE.com
Page 58
LIMITED PRODUCT WARRANTY
Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts
and labor (90 days for commercial use) and is only valid when purchased from an Authorized
Reseller, only on new and non-refurbished product, and available to customers in the
Continental US, Alaska, Hawaii and Puerto Rico. See below for the SCEPTRE Extended
Service warranty.
SCEPTRE’s Responsibility
SCEPTRE units purchased from an authorized SCEPTRE U.S. Reseller in the United States
and that are used in the fifty (50) United States or Puerto Rico and Canada are warranted to
be free from manufacturing defects in materials and workmanship for a period of one (1) year
from the date of their original retail purchase (or a period of ninety (90) days for commercial
use). If the unit fails to conform to this warranty, we will service the units using new or
refurbished parts. In the event that the part required for replacement is no longer in
production and/or is obsolete, SCEPTRE will repair or replace the unit with similar or like
parts of equal value. If a similar or like part is not available, a charge may be incurred to the
owner, for any upgraded parts substituted.
Service Labor
During a period of one (1) year from the effective warranty date (or a period of ninety (90)
days for commercial use), SCEPTRE will provide, when needed, service labor to repair a
manufacturing defect at its designated Service Center. To obtain warranty service in the
United States, you must first call our Customer Support at (800) 788-2878. The determination
of service will be made by SCEPTRE Customer Support. PLEASE DO NOT RETURN YOUR
UNIT TO SCEPTRE WITHOUT PRIOR AUTHORIZATION.
Parts
New or remanufactured parts will be used for repairs by SCEPTRE at its designated Service
Center for one (1) year (or ninety (90) days for commercial use) from the effective warranty
date. Such replacement parts are warranted for the remaining portion of the original warranty
period.
Service
During the one (1) year (or ninety (90) days for commercial use) warranty period, SCEPTRE
will, at its option and sole discretion, repair or replace defective parts, including replacement
of the entire Panel. The Customer will be required to ship the unit to the Service Center
indicated at the time Customer Support is contacted to make the necessary repairs, you are
responsible for all transportation charges to the service facility. SCEPTRE is not responsible
for the de-installation or re-installation of the unit.
Packaging and Shipping Instruction
When you send the product to an authorized SCEPTRE service facility you must use the
original carton box and packing material or an equivalent as designated by SCEPTRE. If you
no longer have them please contact Sceptre’s Customer Support.
Not Covered
This warranty does not cover the following: cosmetic defects; damage, malfunctions, or
failures resulting from shipping or transit accidents, abuse, misuse, operation contrary to
furnished instructions, operation on incorrect power supplies, operation with faulty associated
equipment, modification, alteration, improper servicing, tampering and or, damage from fire,
water, lightning, power surges, abnormal environmental conditions, or other acts of nature;
normal wear and tear (SCEPTRE reserves the right to determine “wear and tear” on any and
all products); unsatisfactory visual or audio performance not caused by a manufacturing
defect; or displays on which the serial number has been removed or defaced. Image Sticking
caused by operating at excessive brightness levels for extended periods or mishandling are
not covered by this warranty. Installation, removal, transportation and reinstallation of a
- 58 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 59
display and routine maintenance and cleaning, are not covered by this warranty. Any
hardware, components, and/or software bundled with the display are not covered by this
warranty. Any damages caused directly or indirectly by Buyer’s or Reseller’s “Value Added
Feature” are not covered by this warranty or Sceptre, Inc. Any damages of any kind including,
but not limited to, direct or indirect damages, lost profits, lost savings, or other special
incidental, exemplary or consequential damages whether for breach of contract, tort, or
otherwise, or whether arising out of the use of or inability to use the product, even if
SCEPTRE, INC. or any dealer, distributor of authorized service provider/partner has been
advised of the possibility of such damages, or any claim by any other warranty are not
covered by this warranty or Sceptre Inc.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED
IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. OUR LIABILITY FOR ANY
AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER,
INCLUDING OUR NEGLIGENCE, ALLEGED DAMAGE OR DEFECTIVE GOODS,
WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT
EXCEED THE PURCHASE PRICE OF THE DISPLAY. WE SHALL NOT BE RESPONSIBLE
FOR LOSS OF USE, COMMERCIAL LOSS OR OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state. This is the only warranty
applicable; no one is authorized to extend or modify it or to grant any other warranty.
SCEPTRE retains the right to assess all warranty claims and to determine if damages are
covered by the warranty. In case of a claim that is not covered by the warranty, you will be
contacted to determine whether SCEPTRE should repair the damage for a fee or whether the
product should be returned to you as received by the repair center.
Dead Pixel Policy
SCEPTRE sets limit on the LCD at 3 dead pixels in a cluster adjacent to each other, or 5
dead pixels in a combination of color and brightness. Any number of dead or bad pixels under
the limit is considered to be within normal performance specification of the LCD and is not
considered defective.
Owner’s Responsibility
Effective Warranty Date
Warranty begins on the date of sale to the end user. To ensure warranty service, keep the
dated bill or sale receipt as evidence of the purchase date. If you can no longer obtain your
receipt, the warranty will revert to the unit’s manufacture date according to the serial number
of the unit. This limited warranty applies only to the original purchaser and is non-transferable.
Warranty Service
For warranty service information, contact SCEPTRE Technical Support at email address
Monitor-TS@SCEPTRE.com, via phone at (800) 788-2878, or via World Wide Web chatting
service at www.Sceptre.com. SCEPTRE Technical Support is available Monday to Friday
8:30 AM to 5:30 PM Pacific Time. Parts and service labor that are SCEPTRE’s responsibility
(see above) will be provided without charge. Other services or services not covered by the
warranty are at the owner’s expense. You must provide the model, serial number and date of
purchase. Before you ask for warranty service, read your User Manual. You might avoid a
service call.
Warranty conditions are subject to change, for latest Warranty Terms and Conditions and
additional information regarding your warranty, please see complete details online at
www.SCEPTRE.com.
- 59 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 60
Disclaimer, Trademarks, & Copyright
Information
“HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Liscensing LLC.”
Xbox 360 ™ is a registered trademark or trademark of Microsoft
Corporation in the United States and other countries.
Playstation® 3 is a registered trademark or trademark of Sony Computer
Entertainment Inc. in the United States and other countries.
Wii™ is a registered trademark or trademark of Nintendo of America, Inc.
in the United States and other countries.
SCEPTRE is a trademark or registered trademark of Sceptre Inc.
Sceptre, Inc. shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages
resulting from furnishing this material, or the performance or use of this
product.
In the interest of continuing product improvement, Sceptre, Inc. reserves
the right to change product specifications without notice. Information in
this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by
any means, for any purpose without prior written permission from
Sceptre, Inc..
- 60 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Page 61
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that my cause undesired
operation.
Please Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Caution: To comply with the limits for an FCC Class B computing device, always use the
signal cord and power cord supplied with this unit.
The Federal communications Commission warns that changes or modifications to the unit not
expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
European Notice
Products with the CE marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and
the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- 61 -
SCEPTRE E230BD-FHD HDTV User Manual
www.SCEPTRE.com
Loading...