Congratulations on your new SCEPTRE X23 High Definition LCD Television
purchase. Thank you for your support. To ensure safety and many years of
trouble free operation of your TV, please read the manual carefully before
making any adjustments, and keep them in a safe place for future reference.
We hope you enjoy your new SCEPTRE X23 High Definition LCD Television.
For technical assistance, please call 1800-788-2878 and select option 3 or
email our tech support group at monitor-ts@sceptre.com
For all other inquiries, please call 1800-788-2878 and select option 4 or
email our customer service group at cs@sceptre.com
We recommend you register your SCEPTRE X23 HDTV with the enclosed
registration card and mail it in. For peace of mind and to protect your
investment beyond the standard warranty, SCEPTRE offers a two year
extended warranty service for your TV. This plan gives additional coverage
once your standard warranty period runs out. Please call our customer
service group to purchase the extended warranty.
.
.
- 1 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
IMPORTANT INFORMATION
- 2 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause
personal injuries and property damage if improperly handled. This product
has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and / or fire. In order to
prevent potential danger, please observe the following instructions when
installing, operating and cleaning the product. To ensure your safety and
prolong the service life of your Liquid Crystal Television, please read the
following precautions carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade and the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
the plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightening storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- 3 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged,
the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
•To avoid the risk of electric shock or
component damage, switch off the
power before connecting other
components to the X23 LCD TV.
•Unplug the power cord before
cleaning the X23 LCD TV. Please use
the included custom bezel cleaning
cloth for cleaning the bezel of the X23
LCD TV only. Do not use a liquid or a
spray cleaner for cleaning the product.
Do not use abrasive cleaners.
•Always use the accessories
recommended by the manufacturer to
insure compatibility.
•When moving the X23 LCD TV from
an area of low temperature to an area
of high temperature, condensation
may form on the housing. Do not turn
on the X23 LCD TV immediately after
this to avoid causing fire, electric
shock or component damage.
•Do not place the X23 LCD TV on an
unstable cart, stand, or table. If the
X23 LCD TV falls, it can injure a
person and cause serious damage to
the appliance. Use only a cart or stand
recommended by the manufacturer or
sold with the X23 LCD TV.
•Any heat source should maintain a
distance of at least 5 feet away from
the X23 LCD TV, i.e. radiator, heater,
oven, amplifier etc. Do not install the
product too close to anything that
produces smoke or moisture.
Operating the product close to smoke
or moisture may cause fire or electric
shock.
www.SCEPTRE.com
•Slots and openings in the back and
bottom of the cabinet are provided for
ventilation. To ensure reliable
operation of the X23 LCD TV and to
protect it from overheating, be sure
these openings are not blocked or
covered. Do not place the X23 LCD
TV in a bookcase or cabinet unless
proper ventilation is provided.
•Never push any object into the
ventilation slots of the X23 LCD TV.
Do not place any objects on the top of
the Product. It could short circuit parts
causing a fire or electric shock. Never
spill liquids on the X23 LCD TV.
•Do not use the X23 LCD TV in a
portrait format (by rotating 90 degrees)
under high temperature environment
(25°C or higher), since this would
retard heat dissipation and would
eventually damage the TV.
•The X23 LCD TV should be operated
only from the type of power source
indicated on the label. If you are not
sure of the type of power supplied to
your home, consult your dealer or
local power company.
•The power cable must be replaced
when using different voltage from that
specified in the User Manual. For
more information, contact your dealer.
•The X23 LCD TV is equipped with a
three-pronged grounded plug, a plug
with a third (grounding) pin. This plug
will fit only into a grounded power
outlet as a safety feature. If your outlet
does not accommodate the three-wire
- 4 -
plug, have an electrician install the
correct outlet, or use an adapter to
ground the appliance safely. Do not
defeat the safety purpose of the
grounded plug.
•Do not overload power strips and
extension cords. Overloading can
result in fire or electric shock.
•The wall socket should be installed
near the equipment and should be
easily accessible.
•Only the marked power source can be
used for the product. Any power
source other than the specified one
may cause fire or electric shock.
•Do not touch the power cord during
thunderstorms. To avoid electric shock,
avoid handling the power cord during
electrical storms.
•Unplug the unit during a lightning
storm or when it will not be used for a
long period of time. This will protect
the X23 LCD TV from damage due to
power surges.
•Do not attempt to repair or service the
product yourself. Opening or removing
the back cover may expose you to
high voltages, the risk of electric shock,
and other hazards. If repair is required,
please contact your dealer and refer
all servicing to qualified service
personnel.
•Keep the product away from moisture.
Do not expose this appliance to rain or
moisture. If water penetrates into the
product, unplug the power cord and
contact your dealer. Continuous use in
this case may result in fire or electric
shock.
•Do not use the product if any
abnormality occurs. If any smoke or
odor becomes apparent, unplug the
power cord and contact your dealer
immediately. Do not try to repair the
product yourself.
•
SCEPTRE X23 HDTV User Manual
•Avoid using dropped or damaged
appliances. If the product is dropped
and the housing is damaged, the
internal components may function
abnormally. Unplug the power cord
immediately and contact your dealer
for repair. Continued use of the
product may cause fire or electric
shock.
•Do not install the product in an area
with heavy dust or high humidity.
Operating the product in environments
with heavy dust or high humidity may
cause fire or electric shock.
•Hold the power connector when
removing the power cable. Pulling the
power cable itself may damage the
wires inside the cable and cause fire
or electric shocks. When the product
will not be used for an extended
period of time, unplug the power
connector.
•To avoid risk of electric shock, do not
touch the connector with wet hands.
•Insert batteries in accordance with
instructions while using the remote
control. Incorrect polarities may cause
damage and leakage of the batteries,
operator injury and contamination the
remote control.
•If any of the following occurs please
contact the dealer:
oThe power connector fails
or frays.
oLiquid sprays or any object
drops into the X23 LCD TV.
oThe Display is exposed to
rain or other moisture.
oThe Display is dropped or
damaged in any way.
oThe performance of the
Display changes
substantially.
•Operating environment: Temperature:
5°C ~ 35°C, Humidity: 10% to 90%
non-condensing, Altitude: 0~10,000 ft.
- 5 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
IMPORTANT INFORMATION
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the LCD TV, make sure that
the antenna or cable system is electrically grounded to provide some protection against
voltage surges and static charges. Article 810 of the National Electrical Code,
ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the LCD TV during a lightning storm or when it is left
unattended or unused for long periods of time, unplug the LCD TV from the wall outlet
and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall
into such power lines or circuits.
- 6 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Opening the Package
The SCEPTRE X23 is packaged in a carton. Any standard accessories are packed
separately in another carton. The weight of the LCD display is approximately 15 lbs.
Since the glass can be easily scratched or broken, please handle the product gently.
Never place the unit on a surface with the glass facing downwards unless it is on
protective padding. When opening the carton, check that the product is in good
condition and that all standard accessories and items are included. Save the original
box and all packing materials for future shipping needs.
Package Contents
SCEPTRE X23 LCD TV Display x 1
TV Stand x 1
User Manual x 1
Power Cord x 1
Warranty / Registration Card x 1
X23 Remote Control (AAA Batteries included) x 1
Audio Cable (Red, and White Connectors) x 1
Component Cable (Green, Blue, and Red Connectors) x 1
Installation
Please read the user manual carefully before performing the installation. The power
consumption of the display is approximately 145 watts. Please use the power cord
designated for the product. When an extension cord is required, use one with the
correct power rating. The cord must be grounded and the grounding feature must not be
defeated. The product should be installed on a flat surface to avoid tipping. Space
should be maintained between the back of the product and the wall for proper
ventilation. If you would like to mount the TV onto the wall, please see page 13-16 for
additional information. Avoid installing the product in the kitchen, bathroom or other
places with high humidity dust or smoke, so as not to shorten the service life of the
electronic components. Please ensure the product is installed with the screen in
landscape orientation. Any 90° clockwise or counterclockwise installation may induce
poor ventilation and successive component damage.
- 7 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Attaching the TV Stand
1. Please place the stand on a flat surface (i.e. table).
2. Hold the TV directly 90 degrees above the stand.
3. Connect the TV to the stand by inserting the TV into the stand.
INDICATOR LIGHT – The light is red when power is plugged in but the TV is
not turned on. The light turns blue when the TV is turned on.
REMOTE SENSOR – The remote sensor receives all the commands from the
remote control.
- 10 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Side Control Buttons
Rear View Mounting Pattern
Mounting Specification: 100mm x 100mm using screw M4 (12mm) diameter screws.
POWER – Turn on the TV by pressing
the button once. Press the button
again to turn off the TV.
SOURCE – This button switches
between all the different sources of the
TV. The switching sequence is as
follows: TV, AV, S-Video, YPbPr, VGA,
and HDMI. When the OSD is active,
this button acts as the enter button
and confirms the menu selection.
MENU – This button activates the On
Screen Display (OSD). If a sub-menu
is active, pressing this button will
return selection to the previous menu
level.
CH(▲/▼) – These buttons change the
TV channel up or down. If the OSD is
active, these buttons function as up or
down controls for the menu.
VOL(+/-) – These buttons increase or
decrease the TV’s volume. If a submenu is active, pressing these buttons
will move the selection left or right.
- 11 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Mounting Preparations
1. Place the monitor on a flat surface with cloth so the bezel does not get scratched.
Unscrew the 4 screws that lock the arm to the monitor.
2. Once the 4 screws are removed, the stand will slide off.
3. The monitor is ready for mounting.
- 12 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Rear View Connections
The following descriptions are for connections from left to right.
1. HDMI – HDMI connects to devices that use HDMI cable, such as Blu-ray or
HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video.
2. VGA - This connection port connects to a PC for video using VGA cable. Be
sure to connect your audio cable to the VGA Stereo input if you want sound
out of VGA video source.
3. VGA STEREO INPUT - This connection port is for people who want to
provide audio to the TV when using a PC or a DVI video device. The sources
use 3.5mm mini-jack audio cable to provide audio for a HDCP enabled DVI
video device or PCs with VGA connection.
4. YPbPr – This connection port is for DVD players, or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue,
and red for video, and then connect white for left channel audio, and red for
right channel audio.
5. LINE OUT - This connection port is used for sending out digital audio signals
to digital surround sound receivers. The orange (COAXIAL SPDIF OUT)
connector with the group COMPONENT sends out either bit-stream or PCM
digital sound signal to a home theater receiver with digital input.
- 13 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
The following descriptions are for connections from left to right.
6. AV – Composite connects to devices that use composite video cables such
as VCR or camcorder or video game consoles. The S-Video connector is
associated with AV’s video. Please connect the video portion with either the
yellow connector or the S-Video connector. Do NOT connect both video
Please Note:
connectors.
7. TV – This connection is for digital or analog cable without the cable box or
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check http://www.antennaweb.org
8. AC IN - This connection is for providing power to the TV. This connection
uses a standard computer power cord.
•This TV features a power saving function which will turn off the TV
automatically after 5 minutes of idling on a connection with no signal. This
feature is present on all connection.
.
- 14 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
SCEPTRE X23 Remote Control
For universal remotes, this TV follows SONY’s universal remote code.
POWER (red button) – Turns the
TV on or off.
MUTE – Mutes the TV’s audio.
0~9 – Sets the channels.
Dash (-) – Inserts the dash for
selecting digital channels directly.
R – Returns to the previous
channel.
GUIDE – Opens the current digital
channel information guide.
SOURCE – Changes between
different inputs of the TV.
▲/▼/◄/►/↵ – Selects and moves
the item on screen. ▲/▼also
functions as channel up and down.
◄/► also functions as volume up
and down. ↵ acts as enter button
for OSD menu and changing
channels in conjunction with
number buttons.
MENU – Opens / Exits the TV
menu.
EXIT – Exits the TV menu.
SLEEP – Sets the Sleep timer.
ASPECT – Selects different screen
size.
ADD – Adds the current channel.
FREEZE – Freezes the TV picture.
CC – Cycles between different
closed captioning modes.
DELETE – Deletes the current
channel.
INFO – Shows the TV info.
MTS – Selects stereo, mono, or
second audio programming.
FAVORITE – Cycles the favorite
channels
PICTURE – Selects various preset
picture settings
SOUND – Selects various preset
sound settings
- 15 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Installing Batteries to the Remote
Please insert two AAA batteries into the remote control. Make sure that you match the
(+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery
compartment. Afterwards, re-attach the battery cover.
Please note:
• Only use AAA batteries.
• Do not mix new and old batteries. This may result in cracking or leakage that may
pose a fire risk or lead to personal injury.
•Inserting the batteries incorrectly may also result in cracking or leakage that may
pose a fire risk or lead to personal injury.
• Dispose the batteries in accordance with local laws and regulations.
• Keep the batteries away from children and pets.
• If the remote control is not used for a long time, remove the batteries.
• Keep the remote control away from moisture, sunlight, and high temperatures.
- 16 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Which Port Should I Use ?
Port Quality
& Name
Best
HDMI
(Digital HD
Capable)
Best/Fair
ATSC/NTSC
(Digital HD
Capable)
Best
VGA
(HD Capable)
Better
COMPONENT
(HD Capable)
Good
COMPOSITE
(Non-HD)
Fair
COMPOSITE
(Non-HD)
Good
VGA STEREO
INPUT
(Audio)
Best
LINE OUT
(Digital Audio)
Port Picture
Cable Used &
Resolution
HDMI
1080p (scaled),
1080i (scaled),
720p, 480p, 480i
Coaxial RF
1080i (scaled),
720p, 480p, 480i
VGA
1360x768 or
lower
Component
1080i (scaled),
720p, 480p, 480i
S-Video
480i only
Composite
480i only
3.5mm mini-jack
Coaxial SPDIF
Devices that
use this Port
Blu-ray DVD
Player, HD-DVD
Player, High
Definition Cable
or Satellite Settop Box
Antenna or Digital
Cable without the
cable box
PC or MAC with
VGA connection
DVD Player,
Video Game
Console, High
Definition Cable
or Satellite Settop Box
Non-High
Definition Cable
or Satellite Settop Box, S-Video
VCR
Non-High
Definition Cable
or Satellite Settop Box, VCR,
Camcorder
HDCP devices,
PC, MAC
Receiver with
Digital Surround
Sound Decoding
- 17 -
www.SCEPTRE.com
Knowing Your Cables
Cable Name
SCEPTRE X23 HDTV User Manual
Cable Picture
HDMI
Coaxial RF
VGA
Component
S-Video
- 18 -
www.SCEPTRE.com
Knowing Your Cables (continued)
Cable Name
SCEPTRE X23 HDTV User Manual
Cable Picture
Composite
3.5 mm Mini-jack
RCA Audio
AC Power
Coaxial SPDIF
- 19 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Switching Sources for Ports
The X23 offers multiple ways of connecting your devices to the TV; the chart below will
help you understand which source you switch to for each of the ports.
Port Picture
Cable Used Source Name to Switch to
COMPONENT
HDMI or
HDMI-DVI
COAXIAL RF
VGA
S-VIDEO
COMPOSITE
HDMI
TV (CABLE / AIR)
VGA
YPBPR
AV (S-VIDEO)
AV (CBVS)
- 20 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Connecting Your Antenna or
Cable to TV
If You Have Digital Cable without Cable Box or
Antenna…
1. Make sure the power of X23 LCD HDTV is turned off.
2. Connect the Coaxial RF cable from your antenna or digital cable to the
TV port on the back of your X23 LCD HDTV.
3. Turn on X23 LCD HDTV.
4. Select TV (Air) for antenna or TV (Cable) for digital cable from either
your remote control’s source button or source button on the right side of
the TV.
5. Use the On Screen Display to scan for channels.
Please Note :
•Not all broadcasts are in High Definition (HD). Please refer to your
local broadcasting stations for more information.
•The X23 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot achieve
that signal level with your antenna or cable, your X23 LCD HDTV
might lose picture or sound.
- 21 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
If You Have Cable or Antenna through VCR…
1. Make sure the power of X23 LCD HDTV is turned off.
2. Make sure there is an antenna or cable connection to the VCR already.
3. Use a Coaxial RF cable and connect from your VCR’s video out to the
TV port on the back of your X23 LCD HDTV.
4. Turn on X23 LCD HDTV.
5. Select TV for digital cable or antenna from either your remote control’s
source button or source button on the right side of the TV.
6. Use the On Screen Display to scan for channels.
Please Note :
•Some VCRs require you to turn it on before its output will have
a signal to the TV. Please consult your VCR manual for
further reference.
•Not all broadcasts are in High Definition (HD). Please refer to
your local broadcasting stations for more information.
•The X23 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot
achieve that signal level with your antenna or cable, your X23
LCD HDTV might lose picture or sound.
- 22 -
www.SCEPTRE.com
If You have Cable or Antenna…
1. Make sure the power of X23 LCD HDTV is turned off.
2. Connect the Coaxial RF cable from your antenna or cable to the TV port
on the back of your X23 LCD HDTV.
3. Turn on the X23 LCD HDTV.
4. Select TV (Air) for antenna or TV (Cable) for cable from either your
remote control’s source button or source button on the right side of the
TV.
5. Use the On Screen Display to scan for channels.
Please Note :
•Not all broadcasts are in High Definition (HD). Please refer to your
local broadcasting stations for more information.
•The X23 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot achieve
that signal level with your antenna or cable, your X23 LCD HDTV
might lose picture or sound.
SCEPTRE X23 HDTV User Manual
- 23 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Connecting Your DVD Player to
the TV
If You Want the Best Connection with HDMI…
1. Make sure the power of X23 LCD HDTV and your DVD player is turned off.
2. Connect a HDMI cable to the HDMI port of your DVD player and the other
end to the HDMI port on the back of your X23 LCD HDTV.
3. Turn on the X23 LCD HDTV and your DVD player.
4. Use the remote control’s source button or the source button on the right side
of the TV to switch to HDMI.
Please Note :
•Please reference the DVD player’s manual as well, to make sure
the DVD player is configured to output correctly to the TV.
- 24 -
www.SCEPTRE.com
Loading...
+ 55 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.