Sceptre E420BV-F120 User Manual
Dear Sceptre Customer,
Congratulations on your new SCEPTRE E420BV-F120 LED HDTV purchase.
Thank you for your support. To ensure safety and many years of trouble free
operation of your TV, please read the manual carefully before making any
adjustments, and keep them in a safe place for future references. We hope
you enjoy your new SCEPTRE HDTV.
For technical assistance, please call 1800-788-2878 and select option 3 or
email our tech support group at monitor-ts@sceptre.com.
For all other inquiries, please call 1800-788-2878 and select option 4 or
email our customer service group at cs@sceptre.com
We recommend you register your SCEPTRE HDTV with the enclosed
registration card and mail it in. For peace of mind and to protect your
investment beyond the standard warranty, SCEPTRE offers a two year
extended warranty service for your HDTV. This plan gives additional
coverage once your standard warranty period runs out. Please call our
customer service group to purchase the extended warranty.
.
- 1 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
IMPORTANT INFORMATION
- 2 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause
personal injuries and property damage if improperly handled. This product
has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and / or fire. In order to
prevent potential danger, please observe the following instructions when
installing, operating and cleaning the product. To ensure your safety and
prolong the service life of your Liquid Crystal Television, please read the
following precautions carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade and the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
the plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightening storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- 3 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged,
the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
• To avoid the risk of electric shock or
component damage, switch off the
power before connecting other
components to the TV.
• Unplug the power cord before
cleaning the TV. Please use the
included custom bezel cleaning cloth
for cleaning the bezel of the TV only.
Do not use a liquid or a spray cleaner
for cleaning the product. Do not use
abrasive cleaners.
• Always use the accessories
recommended by the manufacturer to
insure compatibility.
• When moving the TV from an area of
low temperature to an area of high
temperature, condensation may form
on the housing. Do not turn on the TV
immediately after this to avoid causing
fire, electric shock or component
damage.
• Do not place the TV on an unstable
cart, stand, or table. If the TV falls, it
can injure a person and cause serious
damage to the appliance. Use only a
cart or stand recommended by the
manufacturer or sold with the TV.
• Any heat source should maintain a
distance of at least 5 feet away from
the TV, i.e. radiator, heater, oven,
amplifier etc. Do not install the product
too close to anything that produces
smoke or moisture. Operating the
product close to smoke or moisture
may cause fire or electric shock.
• Slots and openings in the back and
bottom of the cabinet are provided for
ventilation. To ensure reliable
- 4 -
www.SCEPTRE.com
SCEPTRE E420BV-F120 HDTV User Manual
operation of the TV and to protect it
from overheating, be sure these
openings are not blocked or covered.
Do not place the TV in a bookcase or
cabinet unless proper ventilation is
provided.
• Never push any object into the
ventilation slots of the TV. Do not
place any objects on the top of the
Product. It could short circuit parts
causing a fire or electric shock. Never
spill liquids on the TV.
• Do not use the TV in a portrait format
(by rotating 90 degrees) under high
temperature environment (25°C or
higher), since this would retard heat
dissipation and would eventually
damage the TV.
• The TV should be operated only from
the type of power source indicated on
the label. If you are not sure of the
type of power supplied to your home,
consult your dealer or local power
company.
• The power cable must be replaced
when using different voltage from that
specified in the User Manual. For
more information, contact your dealer.
• The TV is equipped with a three-
pronged grounded plug, a plug with a
third (grounding) pin. This plug will fit
only into a grounded power outlet as a
safety feature. If your outlet does not
accommodate the three-wire plug,
have an electrician install the correct
outlet, or use an adapter to ground the
appliance safely. Do not defeat the
safety purpose of the grounded plug.
• Do not overload power strips and
extension cords. Overloading can
result in fire or electric shock.
• The wall socket should be installed
near the equipment and should be
easily accessible.
• Only the marked power source can be
used for the product. Any power
source other than the specified one
may cause fire or electric shock.
• Do not touch the power cord during
thunderstorms. To avoid electric shock,
avoid handling the power cord during
electrical storms.
• Unplug the unit during a lightning
storm or when it will not be used for a
long period of time. This will protect
the TV from damage due to power
surges.
• Do not attempt to repair or service the
product yourself. Opening or removing
the back cover may expose you to
high voltages, the risk of electric shock,
and other hazards. If repair is required,
please contact your dealer and refer
all servicing to qualified service
personnel.
• Keep the product away from moisture.
Do not expose this appliance to rain or
moisture. If water penetrates into the
product, unplug the power cord and
contact your dealer. Continuous use in
this case may result in fire or electric
shock.
• Do not use the product if any
abnormality occurs. If any smoke or
odor becomes apparent, unplug the
power cord and contact your dealer
immediately. Do not try to repair the
product yourself.
• Avoid using dropped or damaged
appliances. If the product is dropped
and the housing is damaged, the
internal components may function
abnormally. Unplug the power cord
immediately and contact your dealer
for repair. Continued use of the
product may cause fire or electric
shock.
• Do not install the product in an area
with heavy dust or high humidity.
Operating the product in environments
with heavy dust or high humidity may
cause fire or electric shock.
• Hold the power connector when
removing the power cable. Pulling the
power cable itself may damage the
wires inside the cable and cause fire
or electric shocks. When the product
will not be used for an extended
period of time, unplug the power
connector.
• To avoid risk of electric shock, do not
touch the connector with wet hands.
• Insert batteries in accordance with
instructions while using the remote
control. Incorrect polarities may cause
damage and leakage of the batteries,
operator injury and contamination the
remote control.
• If any of the following occurs please
contact the dealer:
o The power connector fails
or frays.
o Liquid sprays or any object
drops into the TV.
o The Display is exposed to
rain or other moisture.
o The Display is dropped or
damaged in any way.
o The performance of the
Display changes
substantially.
• Operating environment: Temperature:
5°C ~ 35°C, Humidity: 10% to 90%
non-condensing, Altitude: 0~10,000 ft.
- 5 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
IMPORTANT INFORMATION
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against
voltage surges and static charges. Article 810 of the National Electrical Code,
ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or
unused for long periods of time, unplug the TV from the wall outlet and disconnect the
antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall
into such power lines or circuits.
- 6 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
Opening the Package
The SCEPTRE TV is packaged in a carton. Any standard accessories are packed
separately in another carton. The weight of the TV is approximately 40.12 lbs. Due to
the size and weight of the product, it is suggested that it must be handled by a minimum
of 2 or more persons. Since the glass can be easily scratched or broken, please handle
the product gently. Never place the unit on a surface with the glass facing downwards
unless it is on protective padding. When opening the carton, check that the product is in
good condition and that all standard accessories and items are included. Save the
original box and all packing materials for future shipping needs.
Package Contents
SCEPTRE TV Display x 1
TV Stand x 1
User Manual x 1
Quick Start Guide x 1
Power Cord x 1
Screw x 4
Screw Driver x 1
Warranty / Registration Card x 1
TV Remote Control (AAA Batteries included) x 1
HDMI Cable x 1
Installation
Please read the user manual carefully before performing the installation. The power
consumption of the display is approximately 115 watts. Please use the power cord
designated for the product. When an extension cord is required, use one with the
correct power rating. The cord must be grounded and the grounding feature must not be
defeated. The product should be installed on a flat surface to avoid tipping. Space
should be maintained between the back of the product and the wall for proper
ventilation. If you would like to mount the TV onto the wall, please see page 8, and 10
for additional information. Avoid installing the product in the kitchen, bathroom or other
places with high humidity dust or smoke, so as not to shorten the service life of the
electronic components. Please ensure the product is installed with the screen in
landscape orientation. Any 90° clockwise or counterclockwise installation may induce
poor ventilation and successive component damage.
- 7 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
Attaching or Removing the Stand
1. To attach the base place the display unit flat on a table. Afterwards remove the 2
screws at the bottom of the neck show below.
2. Align the glass base with the neck and then screw in the 4 provided screws to
tighten the base with the neck. Please save the left over 2 screws for future use.
3. To remove the stand, remove the screws in the circled area and the base will
come off. Afterwards screw in the two originally removed screws to secure the
neck swivel assembly (refer to step 1 for picture).
- 8 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
Table of Contents
IMPORTANT INFORMATION .......................................................................................................... 2
SAFETY INSTRUCTIONS ................................................................................................................ 3
SAFETY INSTRUCTIONS ................................................................................................................ 4
IMPORTANT INFORMATION .......................................................................................................... 6
Television Antenna Connection Protection ............................................................................ 6
Opening the Package ..................................................................................................................... 7
Package Contents ........................................................................................................................... 7
Installation ....................................................................................................................................... 7
Attaching or Removing the Stand .................................................................................................. 8
Table of Contents ............................................................................................................................ 9
Identifying Front and Rear Panel ................................................................................................. 10
Front View ................................................................................................................................ 10
Rear View Mounting Pattern .................................................................................................. 10
Side Control Buttons ............................................................................................................... 11
Rear View Connections .......................................................................................................... 12
Installing Batteries to the Remote Control ........................................................................... 13
SCEPTRE TV Remote Control ...................................................................................................... 14
Connection Suggestions .............................................................................................................. 17
If You Have Digital Cable without Cable Box or Antenna… ................................................. 17
Connecting DVD Player with Component YPbPr… .............................................................. 18
Connecting Wii™ with Composite… ...................................................................................... 19
Connecting Cable or Satellite boxes with HDMI… ............................................................... 20
Connecting to a PC with VGA and 3.5 mm minijack … ........................................................ 21
Connecting a Digital Audio Receiver with Coax SPDIF… .................................................... 22
Switching Sources ........................................................................................................................ 23
Ready to Watch Some TV? ........................................................................................................... 24
If You’ve Connected Antenna or Cable to the TV… ............................................................. 24
OSD (On Screen Display) Controls .............................................................................................. 26
Via Remote Control ................................................................................................................. 26
Via TV Side Panel Buttons ...................................................................................................... 26
OSD (On Screen Display) Options ............................................................................................... 27
PICTURE .................................................................................................................................. 27
SOUND ..................................................................................................................................... 31
CHANNEL ................................................................................................................................ 33
PARENTAL ............................................................................................................................... 35
SETUP ...................................................................................................................................... 36
OTHERS ................................................................................................................................... 38
Detailed Explanations ................................................................................................................... 39
USB Connection Explained .................................................................................................... 39
Closed Captioning (digital and analog) Explained ............................................................... 41
Rating Explained ..................................................................................................................... 41
Aspect Ratio Explained .......................................................................................................... 43
Shortcuts to Browsing Channels ........................................................................................... 45
How do I clean the TV ? .......................................................................................................... 46
Troubleshooting ............................................................................................................................ 47
Call Us If You Need Help!.............................................................................................................. 50
Specification .................................................................................................................................. 51
LIMITED PRODUCT WARRANTY ................................................................................................. 53
Disclaimer, Trademarks, & Copyright Information .................................................................... 55
FCC Compliance Statement ......................................................................................................... 56
- 9 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
Identifying Front and Rear Panel
Front View
INDICATOR LIGHT – The light is red when power is plugged in but the TV is not turned on. The
light turns blue when the TV is turned on. Because of the LED in the panel, the TV might take
10 – 12 seconds to power on.
REMOTE SENSOR – The remote sensor receives all the commands from the remote control.
Rear View Mounting Pattern
Mounting Specification : 200mm x 200mm using screw size M6. Length of screw should not exceed
12mm. Please Note : The 12mm length of screw refers to how deep the screw can go inside the
mounting holes. When you’re buying screws, you should add the original 12mm to the thickness of
your mounting plate in order to get the total screw length.
- 10 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
Side Control Buttons
1. VOL(+) – This button increases the TV’s volume. If a sub-menu is active, pressing
this button will move the select right.
2. VOL(-) – This button decreases the TV’s volume. If a sub-menu is active, pressing
this button will move the selection left.
3. CH(
4. CH(
5. MENU – This button activates the On Screen Display (OSD). If a sub-menu is
6. SOURCE – This button switches between all the different sources of the TV.
7. POWER – Turn on the TV by pressing the button once. Press the button again to
◄) – This button changes the TV channel up. If the OSD is active, this button
functions as up for the menu.
►) – This button changes the TV channel down. If the OSD is active, this
button functions as down for the menu.
active, pressing this button will exit the OSD.
When the OSD is active, this button acts as the enter button and confirms the
menu selection.
turn off the TV.
- 11 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
Rear View Connections
1. HDMI1-2 – HDMI connects to devices that use HDMI cable, such as Blu-ray
or HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video.
2. Audio In - This connection port is for people who want to provide audio to the
TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack
audio cable.
3. VGA - This connection port connects to a PC for video using VGA cable. Be
sure to connect your audio cable to the VGA Stereo input if you want sound
out of VGA video source.
4. Video – Video connects to devices that use composite video cables such as
VCR or DVD player or Wii™. Connect the yellow for video and the red / white
for audio.
5. TV – This connection is for digital or analog cable without the cable box or
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check http://www.antennaweb.org
6. YPbPr – This connection port is for DVD players or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue,
and red for video, and then connect white for left channel audio, and red for
- 12 -
www.SCEPTRE.com
SCEPTRE E420BV-F120 HDTV User Manual
.
right channel audio.
7. S-Video – S-Video connects to devices that use S-Video cables such as VCR
or DVD player or Wii™. Connect the black for video and the red / white for
audio. This connection shares audio red / white jacks with YPbPr.
8. Analog Audio Out – This connection is for connecting to analog audio
receivers.
9. USB – USB connects to USB flash drives for playing music and picture. The
USB port is also used for updating the TV’s firmware.
10. SPDIF - This connection port is used for sending out digital audio signals to
digital surround sound receivers. The orange (COAX SPDIF OUT) connector
sends out either bit-stream or PCM digital sound signal to a home theater
receiver with digital coax input.
11. HEADPHONE – This connection is for headphones to be attached to the TV.
12. HDMI3-5 – Please refer to HDMI1-2’s description.
Please Note:
• This TV features a power saving function which will turn off the TV
automatically after 10 minutes of idling on a connection with no signal.
This feature is present on all connection.
Installing Batteries to the Remote Control
Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-)
symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards,
re-attach the battery cover.
Please note:
• Only use AAA batteries.
• Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire
risk or lead to personal injury.
• Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire
risk or lead to personal injury.
• Dispose the batteries in accordance with local laws and regulations.
• Keep the batteries away from children and pets.
• If the remote control is not used for a long time, remove the batteries.
• Keep the remote control away from moisture, sunlight, and high temperatures.
- 13 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
SCEPTRE TV Remote Control
For universal remotes, this TV follows SONY’s universal remote code. You need to find the
actual code from your cable or satellite or universal remote provider.
- 14 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
Top Section
POWER – This button turns the TV on or off.
Because of the size of the panel, the X460
LCD TV will take 10 – 12 seconds to power
on.
FREEZE – This button freezes the video.
Press the button again to unfreeze the screen.
SLEEP – This button enables the sleep
function where the TV turns itself off after the
designated time.
CC – This button turns on the closed
captioning system of the television. Please
Note : CC only works under the sources TV,
AV1, and AV2.
MTS – This button switches between the
main audio and the (SAP) second audio
programming.
USB – This button enables the USB picture
and MP3 playing function in the TV.
ADD – This button adds a channel to the
favorites list while you are using the TV tuner.
DEL – This button deletes a channel from the
favorites list while you are using the TV tuner.
FAV – This button opens the favorite channel
list.
0-9 – These buttons allow you to access the
channels directly. When accessing a digital
channel you would use these buttons in
junction with the ( – ) button to switch
channels.
( – ) – This button allows you to access digital
channels directly when used in junction with
the number buttons 0-9.
R – This button allows you to jump between
your current channel and the last channel you
were on.
- 15 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
Bottom Section
PICTURE – This button selects
different optimized picture settings for
the TV.
SOUND – This button selects different
optimized sound settings for the TV.
VOL(+/-) – These two buttons
increase or decrease the volume of
the TV.
CH(+/-) – These two buttons change
the TV channel up or down.
MUTE – This button stops the TV from
producing any sound.
ASPECT – This button changes the
TV between different display modes.
GUIDE – This button turns on the
electronic program guide that is
received from over the airwave
antenna.
MENU – This button turns on the on
screen display menu (OSD).
▲▼◄► – These buttons allow you to
navigate inside the OSD menu. They
also function as CH+/- for digital
channels in the tuner.
↵ – This button allows you to select
functions inside the OSD menu and
also acts as the ENTER button for
changing channels.
SOURCE – This button switches the
input sources. Once pressed use the
▲▼◄► and ↵ key to select the
source you want to switch to.
EXIT – This button allows you to quit
from the OSD menu
Motion Blur Free – This function
enables the 120 Hz effect.
INFO – This function tells you the
LCD’s current display information.
- 16 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
Connection Suggestions
If You Have Digital Cable without Cable Box or Antenna…
1. Make sure the power of HDTV is turned off.
2. Connect the Coaxial RF cable from your antenna or digital cable to the
TV port on the back of your HDTV.
3. Turn on the HDTV.
4. Follow the first time on screen instructions.
Please Note :
• Not all broadcasts are in High Definition (HD). Please refer to your
local broadcasting stations for more information.
• The HDTV’s tuner is designed for HDTV therefore requires a
stronger signal than normal TVs. If you cannot achieve that signal
level with your antenna or cable, your HDTV might lose picture or
sound.
- 17 -
SCEPTRE E420BV-F120 HDTV User Manual
www.SCEPTRE.com
Loading...