Electricity is used to perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been engineered
and manufactured with the highest priority on safety. However, improper use can result
in electric shock and / or fire. In order to prevent potential danger, please observe the
following instructions when installing, operating and cleaning the product. To ensure
your safety and prolong the service life of your Liquid Crystal Display, please read the
following precautions carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade and
the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
- 1 -
www.SCEPTRE.com
SCEPTRE C35 Display User Manual
SAFETY INSTRUCTIONS
Never place a display set in an unstable location. A display set may fall, causing
serious personal injury or death. Many injuries, particularly to children, can be avoided
by taking simple precautions such as:
1. Use only cabinets or stands recommended by the manufacturer of the display
set.
2. Use only furniture that can safely support the display set.
3. Make sure the display set is not overhanging the edge of the supporting
furniture.
4. Do not place the display set on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the display set to a
suitable support.
5. Do not place the display set on cloth or other materials that may be located
between the display set and supporting furniture.
6. Make sure to warn and educate children about the dangers of climbing on
furniture to reach the display set or its controls.
7. Keep a minimum distance of 5 cm around all edges of the display for
sufficient ventilation.
8. The ventilation should not be impeded by covering the ventilation openings wi
th items, such as newspapers, table-cloths, curtains, etc. Install in accordance
with the manufacturer’s instructions.
9. No naked flame sources, such as lighted candles, should be placed on the ap
paratus.
10. Use only the Sceptre provided power cable or AC adapter approved for use
with this device.
Utilisez uniquement la ligne d’alimentation électrique fournie par la verge ou
l’adaptateur de courant autorisé pour ce dispositif.
11. Operating environment: Temperature: 5°C~40°C, Humidity: 10% to 85% noncondensing, Altitude: 0~2,000 m.
- 2 -
www.SCEPTRE.com
SCEPTRE C35 Display User Manual
IMPORTANT INFORMATION
- 3 -
www.SCEPTRE.com
SCEPTRE C35 Display User Manual
IMPORTANT INFORMATION
Dispose unwanted electronics and batteries through an approved recycler.
F
For display please visit the web at http://www.earth911.com/recycling-
guide/how-to-recycle-large-electronics/
For Batteries please visit the web at http://www.call2recycle.org/
For more information, visit: www.sceptre.com/recycling.html or call (888)
580-5588.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. Please refer
to the last page for further references.
The house icon identifies that this product is for indoor use.
WARNING: This product can expose you to chemicals including lead,
which is known to the State of California to cause cancer. For more
information, go to www.P65Warnings.ca.gov.
- 4 -
www.SCEPTRE.com
SCEPTRE C35 Display User Manual
SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged,
the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
To avoid the risk of electric shock or
component damage, switch off the
power before connecting other
components to the display.
Unplug the power cord before
cleaning the display. Please use a
microfiber cleaning cloth for cleaning
the bezel of the display only. Do not
use a liquid or a spray cleaner for
cleaning the product. Do not use
abrasive cleaners.
Always use the accessories
recommended by the manufacturer to
insure compatibility.
When moving the display from an area
of low temperature to an area of high
temperature, condensation may form
on the housing. Do not turn on the
display immediately after this to avoid
causing fire, electric shock or
component damage.
Do not place the display on an
unstable cart, stand, or table. If the
display falls, it can injure a person and
cause serious damage to the
appliance. Use only a cart or stand
recommended by the manufacturer or
sold with the display.
Only use furniture that can safely
support the display.
Make sure the display is not
overhanging the edge of the support
furniture.
Do not place the display onto tall
furniture (such as cupboards or
bookcases) without anchoring both
the furniture and the display to a
suitable support.
Do not place the display on cloth or
other materials that may be located
- 5 -
www.SCEPTRE.com
SCEPTRE C35 Display User Manual
between the display and supporting
furniture.
Be sure to educate your children
regarding the dangers of climbing on
furniture to reach the display or its
controls.
Any heat source should maintain a
distance of at least 5 feet away from
the display, i.e. radiator, heater, oven,
amplifier etc. Do not install the product
too close to anything that produces
smoke or moisture. Operating the
product close to smoke or moisture
may cause fire or electric shock.
Slots and openings in the back and
bottom of the cabinet are provided for
ventilation. To ensure reliable
operation of the display and to protect
it from overheating, be sure these
openings are not blocked or covered.
Do not place the display in a
bookcase or cabinet unless proper
ventilation is provided.
Never push any object into the
ventilation slots of the display. Do not
place any objects on the top of the
Product. It could short circuit parts
causing a fire or electric shock. Never
spill liquids on the display.
Do not use the display in a portrait
format (by rotating 90 degrees) under
high temperature environment (25°C
or higher), since this would retard heat
dissipation and would eventually
damage the display.
The display should be operated only
from the type of power source
indicated on the label. If you are not
sure of the type of power supplied to
your home, consult your dealer or
local power company.
The power cable must be replaced
when using different voltage from that
specified in the User Manual. For
more information, contact your dealer.
The display is equipped with a two-
pronged plug.
Do not overload power strips and
extension cords. Overloading can
result in fire or electric shock.
The wall socket should be installed
near the equipment and should be
easily accessible.
Only the marked power source can be
used for the product. Any power
source other than the specified one
may cause fire or electric shock.
Do not touch the power cord during
thunderstorms. To avoid electric shock,
avoid handling the power cord during
electrical storms.
Unplug the unit during a lightning
storm or when it will not be used for a
long period of time. This will protect
the display from damage due to power
surges.
Do not attempt to repair or service the
product yourself. Opening or removing
the back cover may expose you to
high voltages, the risk of electric shock,
and other hazards. If repair is required,
please contact your dealer and refer
all servicing to qualified service
personnel.
Keep the product away from moisture.
Do not expose this appliance to rain or
moisture. If water penetrates into the
product, unplug the power cord and
contact your dealer. Continuous use in
this case may result in fire or electric
shock.
Do not use the product if any
abnormality occurs. If any smoke or
odor becomes apparent, unplug the
power cord and contact your dealer
immediately. Do not try to repair the
product yourself.
Avoid using dropped or damaged
appliances. If the product is dropped
and the housing is damaged, the
internal components may function
abnormally. Unplug the power cord
immediately and contact your dealer
for repair. Continued use of the
product may cause fire or electric
shock.
Do not install the product in an area
with heavy dust or high humidity.
Operating the product in environments
with heavy dust or high humidity may
cause fire or electric shock.
Hold the power connector when
removing the power cable. Pulling the
power cable itself may damage the
wires inside the cable and cause fire
or electric shocks. When the product
will not be used for an extended
period of time, unplug the power
connector.
To avoid risk of electric shock, do not
touch the connector with wet hands.
Insert batteries in accordance with
instructions while using the remote
control. Incorrect polarities may cause
damage and leakage of the batteries,
operator injury and contamination the
remote control.
If any of the following occurs please
contact the dealer:
oThe power connector fails
or frays.
oLiquid sprays or any object
drops into the display.
oThe display is exposed to
rain or other moisture.
oThe display is dropped or
damaged in any way.
oThe performance of the
display changes
substantially.
Operating environment: Temperature:
5°C ~ 40°C, Humidity: 10% to 85%
non-condensing, Altitude: 0~2,000 m.
- 6 -
www.SCEPTRE.com
SCEPTRE C35 Display User Manual
Dear Sceptre Customer,
Congratulations on your new SCEPTRE C35 LED monitor purchase. Thank you for your
support. To ensure safety and many years of trouble-free operation of your LED monitor,
please read the manual carefully before making any adjustments, and keep them in a
safe place for future reference. We hope you enjoy your new SCEPTRE monitor.
For technical assistance, please call 1(800) 788-2878 and select option 3 or email our
tech support group at SceptreTS@SCEPTRE.com.
For all other inquiries, please call 1(800) 788-2878 and select option 4 or email our
customer service group at SceptreCS@SCEPTRE.com.
Live Chat also available during business hours M-F 8:30AM-5:30PM.
We recommend you register your SCEPTRE monitor by going to our website
http://www.sceptre.com/registration.html.
- 7 -
www.SCEPTRE.com
SCEPTRE C35 Display User Manual
Opening the Package
The SCEPTRE display is packaged in a carton. The size and weight of the product
might be too heavy for 1 person to handle. In the event of that happening; it is
recommended that the display package must be handled by a minimum of 2 or more
persons. Since the glass can be easily scratched or broken, please handle the product
gently. Never place the unit on a surface with the glass facing downwards unless it is on
protective padding. When opening the carton, check that the product is in good
condition and that all standard accessories and items are included. Save the original
box and all packing materials for future shipping needs.
Package Contents
SCEPTRE Display x 1
Display Base x 1
Display Neck x 1
Display Base Screw x 3 (PM4 x 10mm)
Display Neck Screw x 2 (KM4 x 12mm)
Wall Mount Plate x 1
Wall Mount Standoffs x 4
Wall Mount Screws x 4
DisplayPort Cable x 1
User Manual x 1
Installation
Please read the user manual carefully before performing the installation. When an
extension cord is required, use one with the correct power rating. Use only the Sceptre
provided power cable or AC adapter approved for use with this device. The product
should be installed on a flat surface to avoid tipping. Space should be maintained
between the back of the product and the wall for proper ventilation. Avoid installing the
product in the kitchen, bathroom or other places with high humidity dust or smoke, so as
not to shorten the service life of the electronic components. Please ensure the product
is installed with the screen in landscape orientation. Any 90° clockwise or
counterclockwise installation may induce poor ventilation and successive component
damage.
- 8 -
www.SCEPTRE.com
SCEPTRE C35 Display User Manual
Installing the Monitor Stand Assembly
1. Take the monitor out of the box. Lay the monitor screen facing down on a table
with the monitor still resting on the packing foam. Obtain the display neck and
attach it to the display neck.
2. While the neck is attached to the base, insert and tighten 3 base screws to the
bottom of the base.
- 9 -
www.SCEPTRE.com
SCEPTRE C35 Display User Manual
3. Locate the button on the back of the display. Push the button and lift the back
plate off the display.
4. Insert the back plate to the neck + base (stand) assembly and secure the neck
plate by inserting and tightening 2 neck screws.
- 10 -
www.SCEPTRE.com
SCEPTRE C35 Display User Manual
5. Insert the stand + back plate into the back of the display with the back plate’s top
end going in first.
6. Once the back plate’s top end goes in push down on the bottom end to secure the
stand into the monitor.
- 11 -
www.SCEPTRE.com
SCEPTRE C35 Display User Manual
7. To finalize your installation of the display, please read the following:
a. If you are placing the display on a stand, we would recommend you to
use a display safety strap (not included) in order to minimize the
possibility of the display toppling over.
b. Securely install all screws and connections.
- 12 -
www.SCEPTRE.com
SCEPTRE C35 Display User Manual
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.