Sceptre C32 User Manual

144021121999I
C32
C3 2
G A M I N G C U R V E D M O N I T O R
www.sceptre.com
User Manual
www.sceptre.com
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Display, please read the following precautions carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightening storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. fo r PLU GGA BLE EQUIPM ENT, th e soc ket-outl et sh all b e ins talle d nea r
the eq uip men t and shall be e asi ly ac ces sible .
Never place a display set in an unstable location. A display set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
1. Use only cabinets or stands recommended by the manufacturer of the display set.
2. Use only furniture that can safely support the display set.
3. Make sure the display set is not overhanging the edge of the supporting furniture.
4. Do not place the display set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the display set to a suitable support.
5. Do not place the display set on cloth or other materials that may be located between the display set and supporting furniture.
6. Make sure to warn and educate children about the dangers of climbing on furniture to reach the display set or its controls.
7. Keep a minimum distance of 5 cm around all edges of the display for sufficient ventilation.
8. The ventilation should not be impeded by covering the ventilation openings wi th items, such as newspapers, table-cloths, curtains, etc. Install in accordance with the manufacturer's instructions.
9. No naked flame sources, such as lighted candles, should be placed on the ap paratus.
10. Operating environment: temperature: 5°C~35°C, Humidity: 10% to 85% non-
condensing, altitude: 0~2,000 m.
- 1 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
- 2 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
IMPORTANT INFORMATION
IMPORTANT INFORMATION
Dispose unwanted electronics and batteries through an approved recycler.
For display please visit the web at http://www.earth911.com/recycling-
guide/how-to-recycle-large-electronics/
For Batteries please visit the web at http://www.call2recycle.org/
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Please refer to the last page for further references.
The house icon identifies that this product is for indoor use.
- 3 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
- 4 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
To avoid the risk of electric shock or
component damage, switch off the power before connecting other components to the display.
Unplug the power cord before
cleaning the display. Please use the included custom bezel cleaning cloth for cleaning the bezel of the display only. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
Always use the accessories
recommended by the manufacturer to insure compatibility.
When moving the display from an area
of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the display immediately after this to avoid causing fire, electric shock or component damage.
Do not place the display on an
unstable cart, stand, or table. If the display falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the display.
Only use furniture that can safely
support the display.
Make sure the display is not
overhanging the edge of the support furniture.
Do not place the display onto tall
furniture (such as cupboards or bookcases) without anchoring both the furniture and the display to a suitable support.
Do not place the display on cloth or
other materials that may be located
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
- 5 -
between the display and supporting furniture.
Be sure to educate your children
regarding the dangers of climbing on furniture to reach the display or its controls.
Any heat source should maintain a
distance of at least 5 feet away from the display, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to anything that produces smoke or moisture. Operating the product close to smoke or moisture may cause fire or electric shock.
Slots and openings in the back and
bottom of the cabinet are provided for ventilation. To ensure reliable operation of the display and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the display in a bookcase or cabinet unless proper ventilation is provided.
Never push any object into the
ventilation slots of the display. Do not place any objects on the top of the Product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the display.
Do not use the display in a portrait
format (by rotating 90 degrees) under high temperature environment (25 or higher), since this would retard heat dissipation and would eventually damage the display.
The display should be operated only
from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
The power cable must be replaced
when using different voltage from that specified in the User Manual. For more information, contact your dealer.
The display is equipped with a two-
pronged plug.
Do not overload power strips and
extension cords. Overloading can result in fire or electric shock.
The wall socket should be installed
near the equipment and should be easily accessible.
Only the marked power source can be
used for the product. Any power source other than the specified one may cause fire or electric shock.
Do not touch the power cord during
thunderstorms. To avoid electric shock, avoid handling the power cord during electrical storms.
Unplug the unit during a lightning
storm or when it will not be used for a long period of time. This will protect the display from damage due to power surges.
Do not attempt to repair or service the
product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.
Keep the product away from moisture.
Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
Do not use the product if any
abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself.
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
Avoid using dropped or damaged
appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.
Do not install the product in an area
with heavy dust or high humidity. Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.
Hold the power connector when
removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shocks. When the product will not be used for an extended period of time, unplug the power connector.
To avoid risk of electric shock, do not
touch the connector with wet hands.
Insert batteries in accordance with
instructions while using the remote control. Incorrect polarities may cause damage and leakage of the batteries, operator injury and contamination the remote control.
If any of the following occurs please
contact the dealer:
o The power connector fails
or frays.
o Liquid sprays or any object
drops into the display.
o The display is exposed to
rain or other moisture.
o The display is dropped or
damaged in any way.
o The performance of the
display changes substantially.
Operating environment: Temperature:
5 ~ 35, Humidity: 10% to 85% non-condensing, Altitude: 0~2,000 m.
- 6 -
Dear Sceptre Customer,
Congratulations on your new SCEPTRE C32 LED monitor purchase. Thank you for your
support. To ensure safety and many years of trouble free operation of your LED monitor,
please read the manual carefully before making any adjustments, and keep them in a
safe place for future reference. We hope you enjoy your new SCEPTRE monitor.
For technical assistance, please call 1(800)-788-2878 and select option 3 or email our
tech support group at SceptreTS@SCEPTRE.com
For all other inquiries, please call 1(800)-788-2878 and select option 4 or email our
customer service group at SceptreCS@SCEPTRE.com
Live Chat also available during business hours M-F 8:30AM-5:30PM.
We recommend you register your SCEPTRE monitor by going to our website
http://www.sceptre.com/registration.html
.
.
.
Opening the Package
The SCEPTRE display is packaged in a carton. The size and weight of the product might be too heavy for 1 person to handle. In the event of that happening; it is recommended that the display package must be handled by a minimum of 2 or more persons. Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on protective padding. When opening the carton, check that the product is in good condition and that all standard accessories and items are included. Save the original box and all packing materials for future shipping needs.
Package Contents
SCEPTRE Display x 1 Display Base x 1 Display Neck x 1
Disp lay Por t Cab le x 1
Display Neck Plate x 1 Display Base Screw x 3 (M4*12mm) Display Neck Plate Screw x 2 (M4*8.5mm) Power Cord x 1 User Manual x 1
Installation
Please read the user manual carefully before performing the installation. When an extension cord is required, use one with the correct power rating. The product should be installed on a flat surface to avoid tipping. Space should be maintained between the back of the product and the wall for proper ventilation. Avoid installing the product in the kitchen, bathroom or other places with high humidity dust or smoke, so as not to shorten the service life of the electronic components. Please ensure the product is installed with the screen in landscape orientation. Any 90° clockwise or counterclockwise installation may induce poor ventilation and successive component damage.
- 7 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
- 8 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
Installing the Monitor Stand Assembly
1. Insert the monitor neck onto the base and secure the installation by tightening 3 screws (M4*12mm) to the bottom of the base.
2. Make sure the top of the neck plate with the two protruding metallic ears faces upwards. Install the neck plate onto the top of the neck and secure the installation by tightening 2 screws (M4*8.5mm) to the neck plate.
- 9 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
- 10 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
Loading...
+ 12 hidden pages