Scantech V-1010,V-1010BT Quick Start Manual

Quick Start Guide

VEGA Linear Imager V-1010 / V-1010BT
Handheld Bar code Scanner

Copyright © 2009, Scantech-ID BV.

This manual is copyrighted, with all right reserved. Under the
copyright laws, this manual may not, in whole or in part, be copied,
Photocopied, reproduced, translated or converted to any electronic
medium or machine readable form without prior written consent of
Scantech-ID.

P/N A270001 V1.0 August 2009

Quick Start Guide

Scantech-ID VEGA

Table of contents

Chapter 1 Introduction 1

Chapter 2 Quick start

2.1 Standard Shipment Package 2

2.2 Start up 2

2.3 Start up with Bluetooth 3

2.4 User’s Installation and
Configuration Manual 3

Chapter 3 Configuration

3.1 Programming Flow Chart 4

3.2 Factory Default Setting 5

3.3 General Process 6

3.4 Set All Default 6

3.5 Interface 7

Chapter 4 RS232 parameters

4.1 Baud rate 8

4.2 Parity bit 8

4.3 Data bits 9

4.4 Stop bits 9

Chapter 5 Postambles

5.1 Postamble 10

Chapter 6 Bluetooth Setup

6.1 Scanner Mode 11

6.2 Memory Mode 11

6.3 Sleep Mode 12

Chapter 7 Symbologies

7.1 Enable All Symbologies 13

7.2 Enable/Disable Symbologies 13

Chapter 8 Test Symbologies 18

Chapter 9 Specification

9.1 Readable Symbologies 20

9.2 Physical Characteristics 20

9.3 Operational 21

9.4 Electrical Characteristics (V-1010) 21

8.5 Electrical Characteristics (V-1010BT) 22

9.6 Bluetooth Characteristics 22

9.7 Environmental Characteristics 23

1. Introduction

Thank you for purchasing this brand-new designed
Linear Imager Handheld Bar code Scanner.

VEGA is a cutting-edge gun-type linear imaging
barcode scanner which is designed specifically for
retail market. To the brand new series of VEGA, we
add on more user friendly functions with detachable
cable that makes it more easily to be operated by the
customers.

The new VEGA scanner has a most modern design
with the decorative cover display on the top of the
scanner that enhances the looks of the checkout
counter. This magnificent design allows end-users to
display their product information or any relevant
commercial message in the cover display. This
advanced mechanical design truly creates a win-win
solution for both POS retail systems and consumers.

In short, VEGA is an absolute a high performance
gun-type scanner, which provides the customer with
the most cost effective solution in the market. It is
perfectly suitable and definitely the best choice for any
retailers using POS environment.

2

2. Quick start

2.1 Standard Shipment Package

The standard shipment package is provided with the
following items:

a. VEGA Linear Imager Handheld Bar code Scanner
b. Communication Cable (RS232,KBW or USB)
c. Power Supply (if applicable)
d. Quick Start Guide
e. Stand for V-1010 or Bluetooth Cradle for V-1010BT
g. Transparent Cover Plate

Visually inspect the VEGA and accessories for any
evidence of physical damage. If anything is missing or
appears to be damaged, immediately contact your
dealer.

2.2 Start up

The interface setting RS232, KBW or USB of the
VEGA has been set by factory, your VEGA can plug
and play without any setting.
Connect the communication cable provided to the
RJ45 connector inlet of the scanner and your POS or
Host system. Power-on the VEGA with the provided
power supply if applicable. Press the RED trigger
button at the top side of the unit; aim the bar code so
that it falls across all bars on the 1D bar code. You will

hear one beep and the green LED indicator will lights
on after scan successfully.

2.3 Start up with Bluetooth

Connect the communication cable provided to your
POS or Host system and cradle. Power-on the cradle
with the provided power supply, scan the Bluetooth
address code located on the top side of the cradle,
and Scanner Client Mode Barcode.

scanner client mode barcode

After approximately five seconds your connection is
operational and the blue led on the cradle is on.

Before you can use the VEGA with Bluetooth the
scanner must charged for a minimum of 4.5 hours
before the scanner can use, if the battery is full, the
red light will be off.

2.4 User’s Installation and Configuration Manual

In case you need more in depth information about the
VEGA or more advanced setup options you can
download the VEGA User’s Installation and
Configuration Manual at web site:

www.Scantech-ID.com / Support / Downloads