Scanstrut SPH-8-W Installation Instructions Manual

IMPORTANT

Helm Pods are only compatible with marine electronics devices as stated in the latest Scanstrut Product Guide – subject to change
without prior notice.
Use with unapproved products, or overloading, invalidates any warranty.
No liability is accepted for damage caused by incorrect installation.
The installation and assembly must be regularly inspected for evidence of damage or loose parts.
This product has been designed specifically for the mounting of approved marine electronics devices under normal boating
conditions.
This product is designed to be fitted to pedestal guards manufactured from stainless steel tubing, Ø25-33.7mm [1”- 1.33”] with wall
thicknesses of 1.5mm[1/16”] minimum.
For installations that differ from those stated here, please consult Scanstrut head office.

Scanstrut Scanpod Installation Instructions

®

INSTALLATION SOLUTIONS FOR MARINE ELECTRONICS

HELM POD

x1

x1

Parts List

Pod Front

Pod Back

x8

60541

x8

Hole Saw
ø25mm (1")

Tools Required

Power drill

Jigsaw/Spiral
Saw

Posidriv No. 3
Screwdriver

6

8 x 60541

8 x 60545

60545

3

x2

2

4

5

9

10

8

1

Short Saddle Pack Long Saddle Pack

SPH-8 SPH-12,15,SYSTEM

x2

x2

Drill Bit
ø9.5mm (3/8")

13mm Socket

Socket Wrench
+ Extension

ø9.5mm (3/8”)

ø25mm (1”)

SPH-8 used in all illustrations

7

For ø25mm (1“) tube: ø20mm (25/32”) hole saw
For ø32mm (1 1/4”) tube: ø25mm (1”) hole saw

60042

60043

1x 190SPH3

1x 10SPSADDLE - S

1x 190SPH4

2x 60453

4x 60452

4x 60547

2x 190SPH3

1x 10SPSADDLE - L

6x 60452

6x 60547

3x 60453

2x 190SPH4

190SPH4

10SPSADDLE - S

8x 60452

8x 60547

2x 190SPH3

4x 60453

01-02-11 Issue 1

x8

60452

Discover various marine electronics and navigation in our online store.