Scanspeak H2606-920000 User Manual [ru]

TWEETER H2606/920000

The Discovery series offer traditional design, superior sound, a solid construction,
and a wide range of variants. Combining these elements - plus a wealth of technical
features and finesses - it gives our customers the possibility of acquiring a tailor­made Scan-Speak solution with very good performance at a reasonable low price
point!

KEY FEATURES:

· Horn Loaded High Sensitivity Tweeter

· Low Damping Ferrofluid Cooling

· Coated Textile Diaphragm

· High Stability

· High Performance Tweeter

· Dampened Cavity in Pole Piece

T-S Parameters

Resonance frequency [fs] 1030 Hz

Mechanical Q factor [Qms] 2.1

Electrical Q factor [Qes] 1.2

Total Q factor [Qts] 0.7

Force factor [Bl] 3.3 Tm

Mechanical resistance [Rms] 1.3 kg/s

Moving mass [Mms] 0.4 g

Compliance [Cms] - mm/N

Effective diaph. diameter [D] 26 mm

Effective piston area [Sd] 5.7 cm²

Equivalent volume [Vas] - l

Sensitivity (2.83V/1m) 95.2 dB

Ratio Bl/√Re 1.5 N/√W

Ratio fs/Qts - Hz

Notes:

IEC specs. refer to IEC 60268-5 third edition.
All Scan-Speak products are RoHS compliant.
Data are subject to change without notice.
Datasheet updated: January 21, 2016.

Electrical Data

Nominal impedance [Zn] 6 Ω

Minimum impedance [Zmin] 5.0 Ω

Maximum impedance [Zo] 14.2 Ω

DC resistance [Re] 4.7 Ω

Voice coil inductance [Le] 0.05 mH

Power Handling

100h RMS noise test (IEC 17.1)* 100 W
Long-term max power (IEC 17.3)* 200 W

*Filter: 2. order HP Butterworth, 2.5 kHz

Voice Coil & Magnet Data

Voice coil diameter 25 mm
Voice coil height 1.6 mm
Voice coil layers 2
Height of gap 2 mm
Linear excursion ± 0.2 mm
Max mech. excursion ± 1.6 mm
Unit weight 0.6 kg

N.C. Madsensvej 1 · 6920 Videbæk · Denmark · Phone: [phone] · www.scan-speak.dk

TWEETER H2606/920000

Advanced Parameters (Preliminary)

Electrical data

Resistance [Re'] - Ω

Free inductance [Leb] - mH

Bound inductance [Le] - mH

Semi-inductance [Ke] - SH

Shunt resistance [Rss] - Ω

Mechanical Data

Force Factor [Bl] - Tm

Moving mass [Mms] - g

Compliance [Cms] - mm/N

Mechanical resistance [Rms] - kg/s

Admittance [Ams] - mm/N

N.C. Madsensvej 1 · 6920 Videbæk · Denmark · Phone: [phone] · www.scan-speak.dk