Scanspeak D2606-920000 User Manual [ru]
TWEETER D2606/920000
The Discovery series offer traditional design, superior sound, a solid construction, and
a wide range of variants. Combining these elements - plus a wealth of technical
features and finesses - it gives our customers the possibility of acquiring a tailor-made
Scan-Speak solution with very good performance at a reasonable low price point!
KEY FEATURES:
· High Performance Tweeter
· Low Damping Ferrofluid Cooling
· Linear response faceplate, Neutral Design
· Coated Textile Diaphragm
· High Stability
· Dampened Cavity in Pole Piece
T-S Parameters
Resonance frequency [fs] 1100 Hz
Mechanical Q factor [Qms] 2.36
Electrical Q factor [Qes] 1.31
Total Q factor [Qts] 0.84
Force factor [Bl] 2.7 Tm
Mechanical resistance [Rms] 0.88 kg/s
Moving mass [Mms] 0.3 g
Suspension compliance [Cms] 0.07 mm/N
Effective diaph. diameter [D] 30 mm
Effective piston area [Sd] 7.1 cm²
Equivalent volume [Vas] 0.01 l
Sensitivity (2.83V/1m) 91.4 dB
Ratio Bl/√Re 1.26 N/√W
Ratio fs/Qts 1308 Hz
Notes:
IEC specs. refer to IEC 60268-5 third edition.
All Scan-Speak products are RoHS compliant.
Data are subject to change without notice.
Datasheet updated: February 22, 2011.
Electrical Data
Nominal impedance [Zn] 6 Ω
Minimum impedance [Zmin] 5.0 Ω
Maximum impedance [Zo] 12.9 Ω
DC resistance [Re] 4.6 Ω
Voice coil inductance [Le] 0.04 mH
Power Handling
100h RMS noise test (IEC 17.1)* 100 W
Long-term max power (IEC 17.3)* 200 W
*Filter: 2. order HP Butterworth, 2.5 kHz
Voice Coil and Magnet Data
Voice coil diameter 26 mm
Voice coil height 1.6 mm
Voice coil layers 2
Height of gap 2 mm
Linear excursion ± 0.2 mm
Max mech. excursion ± - mm
Unit weight 0.5 kg
N.C. Madsensvej 1 · 6920 Videbæk · Denmark · Phone: +45 6040 5200 · www.scan-speak.dk
TWEETER D2606/920000
Advanced Parameters (Preliminary)
Electrical data:
Resistance [Re'] - Ω
Free inductance [Leb] - mH
Bound inductance [Le] - mH
Semi-inductance [Ke] - SH
Shunt resistance [Rss] - Ω
Mechanical Data
Force Factor [Bl] - Tm
Moving mass [Mms] - g
Compliance [Cms] - mm/N
Mechanical resistance [Rms] - kg/s
Admittance [Ams] - mm/N
N.C. Madsensvej 1 · 6920 Videbæk · Denmark · Phone: +45 6040 5200 · www.scan-speak.dk
Loading...