Scanspeak 15W-4531G00 User Manual [ru]

MIDWOOFER 15W/4531G00

The Revelator midrange and midwoofers, both well known for their sliced paper cone
technology. The slices are filled with damping glue, which dramatically reduces break­up modes in the diaphragm. In combination with Scan-Speaks low-loss linear
suspension and the patented Symmetrical Drive (SD-1) it represented a breakthrough
in midrange clarity and overall smooth frequency response characteristics.

KEY FEATURES:

· Patented Symmetrical Drive motor design

· Low-Loss linear suspension

· Die cast Alu Chassis vented below spider

· Sliced Cone (Controls Cone Breakups)

· Low Damping SBR Rubber Surround

· Large Ferrite Magnet System

T-S Parameters

Resonance frequency [fs] 40 Hz

Mechanical Q factor [Qms] 4.60

Electrical Q factor [Qes] 0.34

Total Q factor [Qts] 0.32

Force factor [Bl] 5.7 Tm

Mechanical resistance [Rms] 0.70 kg/s

Moving mass [Mms] 13 g

Suspension compliance [Cms] 1.25 mm/N

Effective diaph. diameter [D] 110 mm

Effective piston area [Sd] 95 cm²

Equivalent volume [Vas] 15.8 l

Sensitivity (2.83V/1m) 87 dB

Ratio Bl/√Re 3.09 N/√W

Ratio fs/Qts 125 Hz

Notes:
IEC specs. refer to IEC 60268-5 third edition.
All Scan-Speak products are RoHS compliant.
Data are subject to change without notice.
Datasheet updated: February 22, 2011.

Electrical Data

Nominal impedance [Zn] 4 Ω

Minimum impedance [Zmin] 4.4 Ω

Maximum impedance [Zo] - Ω

DC resistance [Re] 3.4 Ω

Voice coil inductance [Le] 0.25 mH

Power Handling

100h RMS noise test (IEC 17.1) 60 W
Long-term max power (IEC 17.3) - W

Voice Coil and Magnet Data

Voice coil diameter 38 mm
Voice coil height 17.5 mm
Voice coil layers 2
Height of gap 5 mm
Linear excursion ± 6.5 mm
Max mech. excursion ± 9 mm
Unit weight 1.7 kg

N.C. Madsensvej 1 · 6920 Videbæk · Denmark · Phone: [phone] · www.scan-speak.dk

MIDWOOFER 15W/4531G00

Advanced Parameters (Preliminary)

Electrical data:

Resistance [Re'] 3.73 Ω

Free inductance [Leb] 0.0811 mH

Bound inductance [Le] 0.674 mH

Semi-inductance [Ke] 0.0233 SH

Shunt resistance [Rss] 94.3 Ω

Mechanical Data

Force Factor [Bl] 4.94 Tm

Moving mass [Mms] 12.5 g

Compliance [Cms] 1.06 mm/N

Mechanical resistance [Rms] 0.169 kg/s

Admittance [Ams] 0.125 mm/N

N.C. Madsensvej 1 · 6920 Videbæk · Denmark · Phone: [phone] · www.scan-speak.dk