Introduction
Thank you for choosing R110, we hope our
product will bring you many years of enjoyment.
Please read this manual fully before unpacking
and installing the product.
Carton contents
During production and packing we have carefully
checked and inspected this receiver.
After unpacking please check for any damage
from transport. We recommend that you keep the
original cartonbox and packing material for any
future shipping.
In the cartonbox you will find:
1 Remote control
1 FM/DAB antenna
1 Wi-Fi antenna
1 Mains cable
R110 installation
The receiver requires connection to the mains
power supply, so for your safety it is important
that you read this manual carefully.
First switch off all equipment when connecting
your R110.
R110 positioning
Place the amplifier on a solid and plane surface,
avoid placement on carpets and other soft
surfaces.
Secure that there is plenty of ventilation around
the amplifier, minimum 4” (100mm) free space
behind and above the amplifier.
Do not cover the ventilation holes on the backside
of the amplifier.
Care and cleaning
We don’t recommend use of any solvents or cleaners
on R110 lacquered cabinets, the cabinet surface
usually only requires dusting or cleaning with a soft
cloth (do not use water).
Disconnect the unit from the mains supply if
taken out of use for a longer period.
Environmental information
The R110 comply with international directives on
the Restriction of Hazardous Substances (RoHS) in
electrical and electronic equipment and the disposal
of Waste Electrical and Electronic Equipment (WEEE) the crossed bin symbol indicates compliance and that
the products must be appropriately recycled or
processed in accordance with these directives.
CAUTION, read this first
READ, FOLLOW, HEED, AND KEEP ALL
INSTRUCTIONS AND WARNINGS.
DO NOT OPERATE NEAR ANY HEAT SOURCE
DO NOT BLOCK ANY VENTILATION OPENINGS ON
THIS APPARATUS.
DO NOT USE THIS APPARATUS NEAR SPLASHING,
FALLING, SPRAYING, OR STANDING LIQUIDS.
CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND
DO NOT USE CLEANING AGENTS.
ONLY CONNECT POWER CORD TO A POLARIZED,
SAFETY GROUNDED OUTLET WIRED TO CURRENT
ELECTRICAL CODES AND COMPATIBLE WITH
VOLTAGE,POWER, AND FREQUENCY
REQUIREMENTS STATED ON THE REAR PANEL
OF THE APPARATUS.
PROTECT THE POWER CORD FROM DAMAGE DUE
TO BEING WALKED ON, PINCHED, OR STRAINED.
UNPLUG THE APPARATUS DURING LIGHTNING
STORMS
OR WHEN UNUSED FOR LONG PERIODS OF TIME.
ONLY USE ATTACHMENTS AND ACCESSORIES
SPECIFIED BY THE MANUFACTURER FORSAFE
OPERATION AND TO AVOID INJURY.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK OR FIRE.
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
SERVICE MUST BE PERFORMED BY QUALIFIED
PERSONNEL.
R110
3