TC SERIES
PORTABLE & ACCURATE TEMPERATURE CALIBRATION MADE EASY
Like most temperature calibrators you’ll find in this catalog, the TC Series generates true thermal
references, not electronically-simulated ones. The TC Series’ lightweight, compact design makes them
ideal for calibrating your temperature sensors on-site. All Tek Know calibrators come with interchangeable
inserts that can be drilled with single or multiple immersion chambers to meet the specifications of your sensors.
Programmable in either Celsius or Fahrenheit, the two-button operation allows for easy programming. And with the TC Series,
obtaining true reference temperatures has never been easier. Simply place the sensor to be tested inside the well and set the
temperature. The dual line display will show both the true and set temperature; once stabilization occurs, read the temperature and
recalibrate the process or sensor. Tek Know calibrators may be used for calibration of thermocouples, thermistors and RTD sensors, or
complete temperature loops.
• True Calibration
Provides true temperature references, not simulated ones
• Compact Design
Makes it highly portable and ideal for field use
• Communications Port
RS-232 interface is standard, with FREE WindowsTM-based software
for semi-automatic calibration
• Thermal Switch Test
• Easy-To-Use 2-Button Operation
• All Kits Include:
Probe inserts, thermal switch leads, calibration certificate, instruction
manual, industrial strength carrying case and SC200 Software
FREE
SOFTWA RE!
TC150 This calibrator can generate both an ice point reference and a boiling point reference in one portable unit, making it the
optimal choice for food, dairy and biotechnology requirements.
TC400 & TC650 For higher temperature applications, in particular calibration of J and K thermocouples up to 650°C (1192°F).
TC600M This calibrator can maintain high accuracy and stability under the most severe conditions, and is therefore the
popular choice for offshore rigs and leading ship owners. As the TC600M was designed for the demanding needs of the marine
industry, it is also ideal for field use in power utilities, petro chemical processing and the automotive industry.
SC200 Temperature Calibration Software
The SC200 software package is a calibration tool which allows for fully-automatic or semi-automatic calibration, as well as a calibration
management database. This software is useful in creating and maintaining the extensive documentation required by ISO and QS
9000. It contains databases for storing calibration programs, last calibration date, and company information; as well as true values and
deviations, both in percentages and absolute values.
The software can also be used to completely automate your calibration process. Used in conjunction with our SM300 Signal Master,
you can eliminate the need to watch over your calibration while it runs. Just set it up and come back later to print out the certificate.
• Communications
Communicates with SM300 and TC calibrators using RS232 serial ports.
Drivers available for other instruments, including Beamex and Honeywell
• Storage
Stores calibrations and calibration setups
• Display
Shows on screen settling response at each calibration point. Up to 20 points
• Three modes
Can be used in manual, semi- or fully-automatic mode
Information subject to change without notice. Prices in USD. V056.1
TC SERIES, CONTINUED
SPECIFICATIONS
TC150 TC400 TC600M TC650
TEMPERATURE RANGE -40°C* to 50°C (122°F) to 50°C (122°F) to 50°C (122°F) to
150°C (302°F) 400°C (752°F) 600°C (1112°F) 650°C (1202°F)
ACCURACY ±0.3°C ±0.3°C 1°C ±0.5°C
STABILITY ±0.03°C ±0.03°C 0.1°C ±0.05°C
RESOLUTION 0.01° 0.01° 0.01° 0.01°
COOLING TIME <20 min.
AMBIENT TO MINIMUM
HEATING TIME
AMBIENT TO MAXIMUM <15 min. <18 min. <18 min. <20 min.
THERMAL SWITCH TEST Yes Yes Yes Yes
WELL DIMENSIONS 3/4” x 4.4” 1” x 6” 1” x 6” 1” x 6”
OUTPUT RS232 RS232 RS232 RS232
WEIGHT 15 lbs. 16 lbs. 16 lbs. 16 lbs.
CALIBRATOR DIMENSIONS 8” x 5” x 11.5” 8” x 5” x 11.5” 8” x 5” x 11.5” 8” x 5” x 11.5”
POWER 110V or 240 VAC 110V or 240 VAC 110V or 240 VAC 110V or 240 VAC
INSERT FOR O.D. PROBE 1/8” & 3/16” 1/4” & 3/16” 3/16” 1/4” & 3/16”
* below ambient
TC SERIES
Included in standard delivery: RS-232 interface, test cable for thermostats, 2-piece insertion tube, 1/8“ & 3/16 “, (1-1/8“ insert only
for TC600M) calibration certificate, carrying case, 1 pc tool for changing insertion tubes, instruction manual, mains cable
TC150 Temperature Calibrator TC150, -40°C below ambient to 150°C (302°F) $ 5,350
TC400 Temperature Calibrator TC400, Ambient to 400°C (752°F) 3,995
TC600M Temperature Calibrator TC600M, Ambient to 600°C (1112°F) 3,995
TC650 Temperature Calibrator TC650, Ambient to 650°C (1202°F) 4,495
TC-INS-H-B Insert for TC400/TC600M/TC650, undrilled 140
TC-INS-H-18 Insert for TC400/TC600M/TC650, 1/8” 175
TC-INS-H-316 Insert for TC400/TC600M/TC650, 3/16” 175
TC-INS-H-14 Insert for TC400/TC600M/TC650, 1/4” 175
TC-INS-H-38 Insert for TC400/TC600M/TC650, 3/8” 175
TC-INS-H-12 Insert for TC400/TC600M/TC650, 1/2” 175
TC-INS-H-1814 Insert for TC400/TC600M/TC650, 1/8” + 1/4” 250
TC-INS-H-1414 Insert for TC400/TC600M/TC650, 1/4” + 1/4” 250
TC-INS-L-B Insert for TC150, undrilled 130
TC-INS-L-18 Insert for TC150, 1/8” 150
TC-INS-L-316 Insert for TC150, 3/16” 150
TC-INS-L-14 Insert for TC150, 1/4” 150
TC-INS-L-38 Insert for TC150, 3/8” 150
TC-INS-L-12 Insert for TC150, 1/2” 150
TC-INS-L-1814 Insert for TC150, 1/8” + 1/4” 210
TC-INS-L-1414 Insert for TC150, 1/4” + 1/4” 210
TC-OIL Oil kit for TC150 cooling calibrators 45
Information subject to change without notice. Prices in USD. V056.1
Loading...