ScanSense PS-2120 Specifications

www.scansense.no

Data Sheet

PS-2120

Ex ia Pressure Transmitter

For high pressure applications Total Accuracy < 0.25 % FS Fast response time (2ms) Intrinsically safe Atex Ex, and IECEx classified Use in harsh environments Field proven for more than 15 years Splash zone and submerged use

The PS-2000 family is a well proven 4-20mA output Pressure Transmitter with fast response time, high accuracy and long life time performance in harsh and hazardous environments.

By using thin-film strain gauge measuring technology, sputtered on Scan-Sense designed diaphragms, electron beam welded to an inlet, it is superior at both dynamic and static measurements of long life time and high pressure applications.

Both the design and material selection provide durable service with corrosive media, and comply with international accepted standards for materials operating in corrosive environments.

PS-2120 by Scan-Sense is digitally calibrated and temperature compensated with an analogue 4-20mA output signal in a two conductor configuration.

Extensive pressure & temperature cycling tests guarantee this pressure transmitter to be the right choice for the Oil and Gas industry.

Typical Applications are:

Offshore Drilling Offshore Production Gas & Petrochemical Processes

Hydraulics for Lifting, Pumps etc. Splash zone and submerged use.

DS00104B 01.06.2014

www.scansense.no

Data Sheet

Ordering details PS-2120

Part no: Ranges*: 5PS21H300Kx 10..20 bar 5PS21H600Kx 20..40 bar 5PS21H121Kx 40..80 bar 5PS21H221Kx 75..150 bar 5PS21H451Kx 150..300 bar 5PS21H901Kx 300..600 bar 5PS21H182Kx 600..1200 bar

P = Cable gland with fixed cable

ÖLFLEX® FD 855 CP

M = M12 connector interface

Incl. 10m signal cable J = Subsea receptacle 3 pin

Souriau M-series Size 10 (Jupiter) cable with connector not included

K = ¼” BSP Male, for interface please refer to drawing SK01924 Other pressure connections on request.

*Please specify Working Range and cable length when ordering

14 [mm]

91 [mm]

Hex. 27mm

83 [mm] 99 [mm]

Type P Type M Type J

Ø26 [mm]

Pressure Ranges

0-10 ... 1200 bar (g)

Total Accuracy

± 0,25% of Full Scale (± 0,5% FS Range < 0 - 40bar)

Long Term Drift

< ± 0,1% of Full Scale / Year

Output Signal

4 - 20mA (2-wire configuration)

Supply Voltage

10 - 28Vdc

Typical Response Time

< 2ms

Safe Overpressure

≤ 1,5 x Full Scale (or up to 1500 bar)

Burst Pressure

> 3 x Full Scale

Ambient Temperature

-20°C to + 80°C

Medium Temperature

-40°C to + 120°C

Storage Temperature

-40°C to + 125°C

Protections

Ingressive Protection IP68 (Type P) Hyperbaric 100bar/ 1000meter depth (Type J ) Reverse Polarity Protection ( All )

Safety Classifications

CE marking according to EU’s EMC directives Atex directive 94/9EC (Dnv): Ex ia IIC T4 IECEx (NEMKO): Ex ia IIC T4 Ga

Pressure Fitting

Male ¼” BSP (others on request)

Electrical Connection

Cable (Top side version): Blue wire: Supply (+), Brown wire: Signal (-) M12 round connector with signal cable Souriau M10-Series/ Jupiter (Subsea version):

-Pin 1 Supply (+), Pin 2: Signal (-), Pin 3 NA

Materials

Wetted parts: Hastelloy C22 Sensor Housing: Stainless Steel Grade 316

Weight

0,28 Kg (0.62 lb) without cable

Documentation

Calibration and Ex Certificates

Scan-Sense AS is a Norwegian company specializing in design and manufacturing of high quality sensor solutions for pressure, load and force. The company has more than 28 years of experience of making tailor-made solutions for the oil and gas industry.

Technical information

Note: Due to continuous product improvements, published specifications may change without notice.

Manufactured by: Scan-Sense AS, Bekkeveien 163, 3173 Vear, NORWAY

Phone: +47 33 36 30 00, Fax: +47 33 36 30 01, E-mail: post@scansense.no