ScanSense 100 Data sheet
4 - 20 mA Loop
•
0 - 24 VDC
•
Low cost
•
TEK KNOW 100
4 - 20 mA and 0 - 24 VDC
Loop Calibrator
Tek Know 100 is a low cost, easy to use, loop calibrator
with auto-ramp and easy step functions.
The unit is supplied in a case including battery pack
and test leads.
Technical information
Tek Know 100
Electrical Spesifications:
Range Resolution Accuracy
0 - 4mA 1µA ± 0,025% ± 10µA
4 - 20 mA 1µA ± 0,025% ± 5µA
20 - 24mA 1µA ± 0,025% ± 5µA
0 - 4V 1mV ± 0,05% ± 10mV
4 - 20V 1mV ± 0,05% ± 5mV
20 - 24V 1mV ± 0,05% ± 5mV
General Specifications:
Battery Type 9V Alkaline Battery (External Power Input 9 - 15V)
TekKnow100 210803. Photo: Scan-Sense. Collage & Design. Bulle Visjon as ©2003
Display
Operating Temp
Operating Humid Less than 85% relative
Storage Temp
Dimension 88 x 168 x 26 mm (3,46” x 6,61” x 1,03”)
Weight
Accessories Carrying case, User’s manual, External Battery Pack
(without batteries), 9V battery, Test leads, Alligator clip.
Note: Due to continuous product improvements, published specifications may change without notice.
Scan-Sense AS is a Norwegian company specialising in design and manufacturing of high quality sensors/instrumentation and related
software for measurement of temperature, pressure, load and force.
Scan-Sense AS supplies portable temperature calibrators from -40°C to 1200°C and a range of EEx/IS approved portable pressure
calibrators from vacuum to 1200 Bar.
4 + 5 Digits
0 to 50ºC (32 to 122ºF)
- 20 to 60ºC (- 40 to 140ºF)
330 g / 11,63 oz
Distributed by:
w w w . s c a n s e n s e . n o
Manufactured by: Scan-Sense AS, Bekkeveien 163, 3173 Vear, NORWAY
Phone: +47 33 36 30 00, Fax: +47 33 36 31 80, E-mail: post@scansense.no
Loading...