USER MANUAL
Page
1 of 9
Prepared by
Product name/number
Andrei Sazonov
TR06 radio module
Document responsible (approved by)
Checked
Date: YYYY-MM-DD
Release
File Name
Andrei Sazonov
2021-03-15
F
TR06 User Manual
TR06 Radio Module User Manual
D e v e loped for d e m a n d i n g e n v i r o n m e n t s
Scanreco´s TR06 is built and designed for the toughest and most demanding of
environments. Scanreco can hereby offer the market of crane and machine
operators an extremely easy to use radio remote control retaining speed,
precision, and control with the maximum of safety.
Behind the development of the radio transeivers lies the idea
of providing a product with a high degree of reliability, user-friendliness,
and easy upgrade for cable systems or other data radio applications.
The product family includes different transeivers and
receivers offering a variety of choice depending on the area of use. These
products are based on a modular architecture, which makes them extremely
flexible to customize and adapt according to the customer’s needs.
The products – which are in high demand – are mainly mounted on cranes
and mobile machines. Our customers are some of the world’s largest and most
challenging crane and machinery manufacturers. Thousands of cranes and
machines containing Scanreco’s radio products are in use worldwide.
Our products are deployed everywhere, from truck cranes laying heating
pipes in Stockholm to lifting oil pipelines in Russia and setting in place concrete
sections in Singapore.
Scanreco –
What do yo u w a nt
to remote ?
Our customers development
is our own development. This
enables us to offer:
• Customer-specific solutions
• Industrial know-how
• Expertise and experience
• Innovative capacity
• Nimble organisation
• Quality
• Delivery precision
• Service
www.scanreco.se
USER MANUAL
Page
2 of 9
Prepared by
Product name/number
Andrei Sazonov
TR06 radio module
Document responsible (approved by)
Checked
Date: YYYY-MM-DD
Release
File Name
Andrei Sazonov
2021-03-15
F
TR06 User Manual
TR06 Radio Module Parameters for 2,4GHz band
Attribute
Information
Frequency
2405 – 2480 MHz
Channels
16 (5MHz step)
Channel management
FHSS, DSSS
Channel order
Pseudorandom
Channel bandwidth
2,7MHz
Modulation
QPSK
Power
125mW max
Type
Transceiver
TR06 Radio Module Parameters for 915Hz band
Attribute
Information
Frequency
903,5 – 926,53 MHz
Channels
50
Channel management
FHSS
Channel order
Pseudorandom
Channel bandwidth
100 kHz
Data rate
50 kbps
Modulation
FSK
Power
1W max
Type
Transceiver
USER MANUAL
Page
3 of 9
Prepared by
Product name/number
Andrei Sazonov
TR06 radio module
Document responsible (approved by)
Checked
Date: YYYY-MM-DD
Release
File Name
Andrei Sazonov
2021-03-15
F
TR06 User Manual
TR06 Radio Module RF and I/O Interfaces
RF1 and RF2 are the radio connectors for the 900MHz frequency band.
RF2 and RF3 are the radio connectors for the 2,4GHz frequency band.
K1 and K2 are digital interface and power supply connectors.
TR06 Radio Module Power Sourcing
Voltage
Nominal, V
Max, V
VCC Radio 3 3,4
VCC Amplifier
3,4
4,0
RF1
RF2
RF3
USER MANUAL
Page
4 of 9
Prepared by
Product name/number
Andrei Sazonov
TR06 radio module
Document responsible (approved by)
Checked
Date: YYYY-MM-DD
Release
File Name
Andrei Sazonov
2021-03-15
F
TR06 User Manual
TR06 Radio Module Integration
This product is intended to be installed in a remote-control system as a transmitter
and it is designed preferably for wireless control of crane installations, travelling
hoist units, chain and rope hoists, transfer carriages and similar applications.
The host products labels shall state depending on the model used:
Contains FCC ID: N5OTR061, Contains IC ID: 6476A-TR061,
Contains FCC ID: N5OTR062, Contains IC ID: 6476A-TR062,
Contains FCC ID: N5OTR064, Contains IC ID: 6476A-TR064.
Host exemple: 1 – Remote control; 2 – Control box
USER MANUAL
Page
5 of 9
Prepared by
Product name/number
Andrei Sazonov
TR06 radio module
Document responsible (approved by)
Checked
Date: YYYY-MM-DD
Release
File Name
Andrei Sazonov
2021-03-15
F
TR06 User Manual
Remote Controls “MIco” and “Mini”
Control box
USER MANUAL
Page
6 of 9
Prepared by
Product name/number
Andrei Sazonov
TR06 radio module
Document responsible (approved by)
Checked
Date: YYYY-MM-DD
Release
File Name
Andrei Sazonov
2021-03-15
F
TR06 User Manual
Installation description:
1. Mount the TR06 radio module on a main electronics boards with help of 4
screws. Solder the radio modules pinheaders or use connectors for establish
the electrical contacts with a main board.
2. Mount the main board with the TR06 radio module inside a host.
Note: The host products labels shall state:
Contains FCC ID: N5OTR061, Contains IC ID: 6476A-TR061
Contains FCC ID: N5OTR062, Contains IC ID: 6476A-TR062
Contains FCC ID: N5OTR064, Contains IC ID: 6476A-TR064
Antennas
For available antennas – please, see the document “Theory of operation of TR06
radio module.
In hand-held / hand operated hosts for 915MHz band just antennas with max gain
0dBi should be used (for example art. n. 103003 and 102986).
Test modes and additional testing
The special test software for measurement of radio parameters and spurious
emission is provided.
TR06 radio module compiles with Part 15.247 of FCC Rules. But final host product
still requires the Part 15 Subpart B compliance testing with the radio modul
installed.
USER MANUAL
Page
7 of 9
Prepared by
Product name/number
Andrei Sazonov
TR06 radio module
Document responsible (approved by)
Checked
Date: YYYY-MM-DD
Release
File Name
Andrei Sazonov
2021-03-15
F
TR06 User Manual
FCC Information
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates,uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
This device compiles with Part 15 of FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesirable operation.
Warning
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Industry Canada Information
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
CAN ICES-3 (A)/NMB-3(A)
USER MANUAL
Page
8 of 9
Prepared by
Product name/number
Andrei Sazonov
TR06 radio module
Document responsible (approved by)
Checked
Date: YYYY-MM-DD
Release
File Name
Andrei Sazonov
2021-03-15
F
TR06 User Manual
Radiation Exposure Statement
To comply with FCC/IC RF exposure limits for general population / uncontrolled
exposure, the antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
For radio modules installed into the hand-held / hand operated hosts the minimum
separation distance from antennas to hands is 5 mm for 2,4GHz frequency band and
30 mm for 915MHz frequency band.
Déclaration d’exposition à la radiation
Pour se conformer aux limites d'exposition RF FCC / IC pour la population générale
/ exposition incontrôlée, la ou les antennes utilisées pour cet émetteur doivent être
installées de manière à fournir une distance de séparation d'au moins 20 cm de
toutes les personnes et ne doivent pas être colocalisées ou en fonctionnement en
conjonction avec toute autre antenne ou émetteur.
Pour les modules radio installés dans les hôtes portatifs / manuels, la distance de
séparation minimale entre les antennes et les mains est de 5 mm pour la bande de
fréquences 2,4 GHz et de 30 mm pour la bande de fréquences 915 MHz.
USER MANUAL
Page
9 of 9
Prepared by
Product name/number
Andrei Sazonov
TR06 radio module
Document responsible (approved by)
Checked
Date: YYYY-MM-DD
Release
File Name
Andrei Sazonov
2021-03-15
F
TR06 User Manual
Revision history
Release
Date: YYYY-MM-DD
Edited By
Changes
A
2020-09-23
Andrei Sazonov
First creating of document
B
2020-11-26
Amie Hafström
Changed from Class A to Class B
equipment for FCC
C
2020-11-26
Andrei Sazonov
Revised document
D
2021-01-14
Andrei Sazonov/
Amie Hafström
Revised document
E
2021-03-02
Andrei Sazonov
Page 4: antenna using condition
for hand-held / hand operated
hosts added.
Page 6: specific FCC rula part
added.
Page 8: separation distance for
hand-held / hand operated hosts
specified.
F
2021-03-15
Andrei Sazonov
Page 6: antenna pn 102890
corrected to 103003
Loading...