SC2000 MH-39131E1 Instruction Manual

- 1 -
2Mega-Pxiel/10X Optical Zoom/OSD
Menu SDI Output/AIO Camera
INSTRUCTION MANUAL
WarningPlease read this manual carefully before installation and use!
- 2 -
1SAFETY TIPS
Installation must be operated by qualified professionals Laypeople are forbidden to open this camera!
2POINTS FOR ATTENTION
1. Keep the camera away from damp or rainy places, and install strictly as per the manual.
2. To avoid damage, please do not operate with power on.
3. Please do not disassemble or make modification on the camera without permission.
4. For connection guidance, please refer to the connection diagram in this manual.
5. This camera is required to be used under stated voltage/humidity/temperature range.
6. Please do not make the camera directly shoot at highlight or sunshine.
7. Right of final explanation for this manual is reserved by the manufacturer.
3CHARACTERISTICS
This model is a 2Mega-Pxiel 1080P Full HD Camera, 1X Optical Zoom,,DC IRIS and ICR
technology ,OSD Menu inside camera, which makes the camera more convenient to use, characteristics as below:
Omnivision 1/2.7’’ CMOS Sensor OV2715. Pixel Array:Video 2M.  1080p/30 Resolution  10X Optical Zoom  Full HD SDI Output  Chinese& English OSD Menu  Electronic Shutter  Mirroring Function  Built-in IR-CUT Module  DC12V Power
- 3 -
4FUNCTION
FIGURE1Camera Rear Panel
PROTOCOL
PELCO-D. transmission rate 2400
ADDRESS
Operate through OSD function table, Camera ID address range from 0 to 255 for setting
Call OSD menu
Press MENU function table control key, or press CALL+95+ENTER on RS485 Keyboard
OSD menu up
Press UP function table control key,or Joystick upward on RS485 Keyboard
OSD menu down
Press DOWN function table control key,or Joystick downward on RS485 Keyboard
Enter submenu
Press ENTER function table control key, or Joystick rightward on RS485 Keyboard
Return superior menu
Press LEFT function table control key ,or operate OSD to RETURN and press ENTER function table control key, or Joystick leftward on RS485 Keyboard,or operate OSD to RETURN and Joystick rightward on RS485 Keyboard
Zoom Control
Press LEFT&RIGHT function table control key,or press TELE&WIDE on RS485 Keyboard.
Focus Control
Press UP&DOWN function table control key,or press FAR&NEAR on RS485 Keyboard
1. OSD Menu control
2. Video Output
Port
3. Expansion por B-:RS485­A+:RS485+
COM: Public port CDS IN: Set aside IR synchronous
input
DC12V Power Supply Input
Interface
6
2
3
1
- 4 -
5DIMENSION
Unit:mm
6MENU OPERATION
FOCUS
ONEPUSH AF / MANNAL back
IMAGE EFFECT
FREEZE / B&W/NEGATIVE / MIRROR / FLIP / MUTE (ON/OFF OPTIONAL) back
DAY/NIGHT
MODE AUTO/COLOR/B&W/EXT SWITCH DELAY 5 (1-15 OPTIONAL) D-N LEVEL 2 (1-10 OPTIONAL) back
EXPOSURE AREA
FULL / CENTRAL / SPOT back
VIDEO OUT
NTSC / PAL
- 5 -
back
IMAGE SIZE
1080i 60/50 1080p 30/25 720p 60/50 back
WHITE BALANCE
CLOUDY / TUNG STEN / FLUORESCENT / DAYLIGHT / AUTO/MANUAL back
SATURATION
MORE / NORMAL / LESS back
ADVANCED FUNCTION
BLC : OFF(OFF/LESS/NORMAL/MORE OPTIONAL) EXPOSURE SHUTTER : AUTOAUTO;1/50 to 1/2500s OPTIONALAUTO;1/60 to 1/3000s OPTIONAL back
LANGUAGE
ENGLISH / TRADITIONAL CHINESE / SIMPLIFIED CHINESE back
SYSTEM
SYSTEM VERSION:X.X.X MCU VERSION:X back
CAMERA INFORMATION
TITLE DISPLAY :ON/OFF CAMERA ID :1(0-255 OPTIONAL) ID DISPLAY:OFF(ON/OFF OPTIONAL) back
RESET
SET
Quit
- 6 -
7PARAMETERS
Model
MH-39131E1
Image Sensor
Omnivision 1/2.7’’ CMOS Sensor OV2715
Pixel Array
Video 2M
DSP
Ambarella A2i(Full HD)
Resolution
1080p/30
Video Output
1080i 60/50 1080p 30/25 720p 60/50
Video Output Mode
Digital:HD-SDI
Optical Zoom
10X Optical Zoom/F1.88(W)~F2.8(T)/f=6mm(W)~60mm(T)
Horizontal View Angle
50°(Wide)~5°(Tele)
Focus Mode
Auto/Manual focus
Focus Length
10cm~infinite(Wide),1m~infinite(Tele)
Explosure Mode
Auto,Spot AE
AGC
Support
Picture Effects
Freeze / B&W/Negative / Mirror / Flip/ Mute
White Balance
Auto/Cloudy/Tungsten/Fluorescent/Daylight /Manual
Exposure Area
Full/Center/Spot
BLC
Off/Less/Normal/More Optional
D/N Mode
COLOR / B&W / AUTO
OSD Language
ENGLISH / TRADITIONAL CHINESE / SIMPLIFIED CHINESE
Communication
RS485,Baud rate: PELCO-D 2400bps
Power Supply
12VDC±0.5V
Power Consumption
3.8W
Size
137.5(L)X58(W)X62(H) mm
Storage Temperature
-20~60
Operation Temperature
0~50
Humidity Range
20%~90% RH
Weight
435g
Loading...