ank you for purchasing from SafetyBasement.com! We appreciate your business.
We made this simple manual to help you enjoy your new product as quickly and easily as
possible.
Be sure to check the TECH SUPPORT tab on your product page at SafetyBasement.com
for the latest available manual.
On: Quickly press Power button 2 times and then press it once for a long time until
dark blue indicator light turns on for 3 seconds. Once the blue light turns o, the unit starts
recording.
O: Quickly press Power button 4 times, and then press it once for a long time until
dark blue indicator light ashes for 3 seconds. is will stop the unit from recording.
2. Battery indicator:
e device allows you to check how much battery power is le in the unit. In order to
achieve this, quickly press Power button once and then press it once for a long time until dark
blue indicator light ashes 1 to 4 times. (1 ash indicates low battery, 4 ashes indicate high
battery power.)
3. Voice Recording Status Check:
e device allows you to quickly check if the device is on or o. Press Power Button for
a long time. If the dark blue indicator light turns on for 3 seconds , this indicates the device is
on.If dark blue indicator light ashes for 3 times, this indicates the device is o.
Your voice recordings are located inside the Date Stamped folders. Double click this folder to
view your voice recordings.
You should COPY these les to your PC for archiving and best playback.
To create more storage space, you can delete the les from your device.
NOTE TO MAC USERS! When deleting les, you MUST empty your trash BEFORE you Eject
the device from your Mac.
Date Stamped Folder
Date Stamped Folder
1. Connect USB cable to
recorder and other end to
computer. e red indicator light will turn on the
recorder to show the connection is successful.
2. A window will pop up.
Open folder to view les
or nd the drive the unit is
connected to and you will
see the les to the le.
3. Double click les to nd
your recordings. e voice
recordings will be under
Date stamped Folders.
Double click the Date
stamped Folder requested
and the voice recordings
will be displayed.
recording. It is also defaulted to VOICE ACTIVATION MODE
and to record when voice is heard, around the clock. It turn on
and record when any voice is hear, and will pause and stay on
standby when no sound is present.
- Never delete the record.txt le under any circumstance
- Only manipulate referenced numbers or letters if you have to.
Do not manipulate anything else as this may cause errors.
Record txt. can be found at the same place as Date Stamped Folders described in
previous page. Double Click the Record.TXT to manipulate recording settings.
DOUBLE CLICK RECORD.TXT AND
RECORD.TXT-Notepad will be displaced
IMPORTANT: If you make any changes to features such as time, voice
sensitivity, mute time, voice quality, record amplify and record time periods, YOU MUST
change Update Setting to Y instead of N. at way, the system will update settings aer U
disk is exited.
System will not start update settings if it is set to N...
Update Settings needs to be
changed to Y aer the = sign for
changes to take eect.
Device allows you to adjust voice sensitivity. e smaller the number for voice
sensitivity the better it is at capturing lower level sounds.
Voice Sensitivity Range: 0-50
Default Rate: 10
Voice Sensitivity Setting here is set to default rate
of 10
is feature will allow you to choose how many minutes aer conversation ends
the device will go to a standby mode. You can choose between 0 to 999 minutes
and the default rate used in this case is 3 minutes.
Device allows you to adjust voice quality. e higher the voice quality, the lower
the stored audio hours will be.
Rate 1: 32Kbps, 8G memory can store 580 hours audio
Rate 2: 64Kbps, 8G memory can store 290 hours audio
Rate 3: 192kbps, 8G memory can store 96 hours audio
Device allows you to adjust for long distance recording. Voice will be enhanced
by amplifying record.
Rate 1: Within 3.28 Feet range
Rate 2: Within 3.28-9.84 Feet range
Rate 3: Within 9.84-16.40 Feet range
Rate 4: Over 16.40 Feet range
For example, Rate 4 will
amplify voice so it can
detect sounds from over
is section talks about how you can schedule recordings at specic times and dates
of the week. e current default setting is set to record around the clock in voice activation mode. Only manipulate the times of any specic day if you want to record for
specic hours of the day or you want to skip a day.
Note: If you change the time , please ensure you maintain the format.
Skipping a day: If you like to skip a whole day of recording, you can do so by leaving
it blank aer the equal sign for the corresponding day.
Splitting a Day: You can split the recording time in a day to two time periods maximum. For example, if you like to record between 8 to 12 in the morning and 2 to 6 in
the aernoon on Saturday, the correct way to display that information will be
Sat: 08.00-12.00, 14.00-18.00 .
Your Windows PC or Mac has built-in soware that will play most of the les created by devices
like yours. However, if you are having problems playing your les, or need more options, please
download and try these programs.
You can nd support and tutorials for these programs on their respective websites.
SafetyBasement can not provide soware support for these programs
As with ANY les you download from the internet, be sure to scan them for viruses using your
particular virus scanner. While most users report no issues using this soware, we can not be
responsible for any damage caused by this soware. Please proceed carefully. Back up your PC
before installing any new soware.
VIDEO PLAYBACK - VLC
(http://www.videolan.org/vlc/index.html)
e VLC Media Player can play almost any video or audio le type. ere is
a version for Windows and for Mac OS X.
VIDEO EDITING for WINDOWS - MOVIE MAKER 2012
(http://windows.microso.com/en-US/windows/get-movie-makerdownload)
Movie Maker is a simple video editing program from Microso. Please go
to this link, and choose the download for your version of Windows. Please
note: Movie Maker is part of the Windows Essentials package.
VIDEO EDITING for MAC OS X - iMOVIE
(Visit the Apple Mac App Store for latest version)
iMovie is a simple video editing program from Apple. It comes installed with
your new Mac. e latest version is also available at the Mac App Store at
additional cost.
AUDIO PLAYBACK and EDITING - AUDACITY
(http://audacity.sourceforge.net/)
Audacity is a popular audio editing program used by amateurs and
professionals to edit simple and complex audio projects. You can use
Audacity to convert your audio les to another format, such as MP3. ere
is a version for Windows and Mac OS X.
PHOTOS
Your Windows and Mac computers have the ability to do basic editing of
photos built in.