USER MANUAL
Single Channel Active Video Balun Receiver
Model: VAB100R With Additional BNC Loop Out
The VAB100R video receiver is a one channel active device that allows reception of real-time monochrome (B/W) or color video via Unshielded Twisted Pair
(UTP) cable. The unit receives one channel of video from transmitters with screw type terminals available for connections and provides one pair of BNC video
output.
The unit is compatible with active transmitter (e.g. VAB100T) and passive transceivers (e.g. VPB400TRJ) with transmission distance up to 1200 m / 4000 ft
and 600 m / 2000 ft respectively. Each switch can be independently adjusted for the different transmission distances and image quality based upon the type
and quality of the cable being used.
Features:
• Transmit a full motion color video signal up to 1200 m / 4000 ft and a
B/W video signal up to 2400 m / 8000 ft.
• Supports all bandbase signals including PAL, NTSC, SECAM.
• Signal Transmission via UTP cable.
• Transmission Signal 1Vp-p Composite Video.
• Built-in transient protection and ground lifting, which eliminates
damaging voltage spike problems.
• Built-in Filter: 0~6MHz
• Video receiving connectors with screw type terminals.
• Two BNC Video Outputs
• Red LED: Power on/off
• Yellow LED: Signal
• Power supplied 12V DC
Switch Chart: Each switch can be independently adjusted for the different
transmission distances and image quality based upon the type and quality of
the cable being used.
Application Diagram:
A)
A)
B)
Components are Made In USA for this product:
Name of Component Manufacturer
DCDC Power National Semiconductor
Video Signal Disposal Intersil
R&D Designed in Taiwan
Assembled in China
B)
Panel View:
Front Rear
12V DC + - G
A-9
UTP = Unshielded Twisted Pair 1 R201208-V21
Troubleshooting:
V
All transmission distances mentioned above are without connecting image processors (e.g. Quad, Multiplexer, or DVR). The transmission range would
be reduced 100~200 m / 300~600 ft upon different camera, cable, DVR … etc.
These products are designed for long range transmission, utilizing the built-in video amplifier function. If your transmission range is under
100 m / 300 ft, setting the video gain function too high will result in snowy, wavy, or overly bright images. It is recommended that this product be used for
long transmission distances over 100 m / 300 ft. For shorter distances use an alternate passive video transceiver such as the VB100 series.
Both of the active transmitter and receiver have "4 position distance range switch" for different range transmission. Please adjust to appropriate range
upon your application to avoid any weak or bad image.
Specification:
Model
Power Properties
Video Transmitting Properties
Connection Properties
Surge Protections
Video Adjustments
Indicators
Stability MTBF >30,000 hours
Physical Properties
Environment
Adaptive Voltage Arrange 12V DC
Power Consumption <100mw
Supporting Video Mode All Baseband Signals including PAL, NTSC, SECAM
Signal Band 250MHz (-3dB)
Balance Band 0~6MHz
Maximum Transmission Distance
Interference Rejection >75dB
Video Output Connectors 2 Female BNC, Resistance 75 Ohms
Connector for UTP Transmission Screw Terminal Set, Resistance 50 Ohms
Video Output Protection
Video Input Protection
Video Input Protection for Over
Current
Adjusting Switches 4 Blue Adjusting Switches per Channel
Adjusting Categories Categories: 0~600M, 600~900M, 900~1200M, >1200M
Power LED Red
Signal LED Yellow
Dimensions L x W x H 115 x 83 x 22 mm / 4.53 x 3.27 x 0.87 inches
Housing Material Metal
Color Black
Weight 190g / 6.7 oz
Operating Temperature 0°C ~ 50°C / 32°F ~ 122°F
Relative Humidity 0~95%
Storage Temperature -40°C~150°C / -40°F ~ 302°F
Color 1200 m / 4000 ft ; B/W 2400 m / 8000 ft (working with VAB100T)
2kV (common mode), 10/700us
2kV (different mode), 4kV (common mode)
AB100R
Transmitting UTP Cable
Standard: IEC61000-4-2
Standard: IEC61000-4-2
100mA
*Specifications are subject to change without notice.
Package Contents:
• One (1) Single Channel Active Video Balun Receiver
• One (1) User Manual
R&D Designed in Taiwan
Components are Made in USA: DCDC Power (National Semiconductor), Video Signal Disposal (Intersil)
Assembled in China
Caution:
• Do not connect this device to any power source.
• Do not handle the unit with wet hands.
• The unit is not waterproof and should not be used outdoors.
Limited Warranty:
LIMITED ONE (1) YEAR WARRANTY AND EXCLUSIONS
Manufacturer warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by
Manufacturer is free of defects in materials and workmanship under normal and proper use for one (1) year from the purchase date. Ma nufacturer's
only obligation is to correct such defects by repair or replacement, at its option, if within such one (1) year period the product is returned prepaid, with
proof of purchase date, and a description of the problem. This warrant excludes and there is disclaimed liability for labor for removal of this product
or reinstallation. This warranty is voided if this product is installed improperly or in an improper environment, overloaded, misused,
opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or
instructions. There are no other implied warranties of any kind, including merchantability and fitness or a particular purpose, but if any
implied warranty is required by the applicable jurisdiction, the duration of any such implied warrant, including merchantability and fitness of or a
particular purpose, is limited to one (1) year. Manufacturer is not liable for incidental, indirect, special, or consequential damages, including
without limitation, damage to, or loss of use of, any equipment, loss sales or profits or delay or failure to perform this warranty obligation.
The remedies, provided therein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
A-9
UTP = Unshielded Twisted Pair 2 R201208-V21
Loading...