Savox Communications BHS 803 User Manual

Iqua Touch BHS-803 Bluetooth Headset/BHS-803

Features

Touch user interface
Multipoint – connect to 2 Bluetooth devices simultaneously
Active noise cancellation
Auto Volume – dynamically adjusting volume base on surroundings
Answer, End & Reject calls
Redial, Voice Dial and Put a call on hold

Specification

Bluetooth version 2.1 + EDR with Headset (HSP) and Hands-free (HFP)profiles support
Up to 3 hours talk time & 60 hours of standby time
Rechargeable Li-poly battery with charging options of AC adapter and USB
Ultra light weight – less than 7 grams
Operating range up to 10 meters (about 33 feet)
Operating and storage temperature is 50F – 104F (10C – 40C)

Use Your Bluetooth Headset

Charging

1. Connect the charging stand with the AC adapter or PC USB port.

2. Put the headset on the charging stand and make sure the red indicator light on the headset is on.

3. If a call comes in during charging, simply remove the headset from the charging stand and touch the headset to take the call.

4. The red indicator light will be off when the battery is fully charged.

5. The full charging time is less than 2 hours.

Pairing

Pairing with cell phone

1. Turn on Bluetooth on your cell phone or Bluetooth device and get it into pairing mode. Consult the manual of your
Bluetooth device for further assistance.

2. Turn off the headset if the headset is on.

3. Press the Power button for 8 seconds to enter pairing mode, the blue indicator light (represents Line 1) will start to blink
every 1 second.

4. Tap the power button to switch the indicator light to orange (represents Line 2) if you want to pair Line 2 with the
Bluetooth device.

5. Enter 0000 if your cell phone requests a passkey.

Pairing with PC or Mac

On PC, the build-in Bluetooth driver in Windows XP and Vista does not support headset nor hands-free features, please install
the Bluetooth driver comes from your PC or Bluetooth dongle for complete Bluetooth feature support.

Mac OS X supports Bluetooth headset and hand-free features; simply follow “Mac OS X” section below to setup the headset for
your Mac.

WIDCOMM Bluetooth Software for Windows

1. Double-click Bluetooth icon located on your desktop or Windows task bar to bring up Setup Wizard and
follow the steps on your screen.

2. Select VOX Touch as the Bluetooth device to add.

3. Use 0000 as the passkey.

4. Complete the pairing. Now the headset is your default speaker and microphone, you can use the headset
with Skype.

Toshiba Bluetooth Stack for Windows

1. Double-click Bluetooth icon located on your desktop or Windows task bar to bring up Setup Wizard and
follow the steps on your screen.

2. Select VOX Touch as the Bluetooth device to add.

3. Use 0000 as the passkey.

4. Enable the option of VoIP-associated application setting.