Savio UVinex Operating Manual

UVinex Standard and High Output Systems

Operating Manual & Specications

Read the entire instructions prior to assembling and operating

For use with Savio Skimmerlters only

Savio UVinex™ systems provide unparalleled water clarity for your pond.
UVinex™ oers a safe, chemical-free solution for eliminating green water. By
adding a UVinex™ system you’ll also enhance the ltration capabilities of your
Savio Skimmerlter. ®

UVinex System

Standard High Output

SUV050A
SUV026A
SUV018A

_____________________________
Read entire instructions prior to assembly and operation

SUV2800HO
SUV3500HO
SUV5500HO

UVinex Components

The UVinex System should come fully-assembled (do not disassemble). Examine all parts while
unpacking. Carefully inspect UVinex Bulb for damage incurred during shipping. If the unit
appears damaged, contact the dealer you purchased it from for a replacement. Do not use it if
damage is evident.

Standard High Output

RU1805 -18 Watt
RU2605 - 26 Watt
RU5005 - 50 Watt

RU2800HO - 28 Watt
RU3500HO - 35 Watt
RU5500HO - 55 Watt

Transformer and Bulb
compatability

RU116 RU117

RU1805
RU2605

RU5005
RU2800HO
RU3500HO
RU5500HO

2

Installation

1

2

3

4

5

If installing a single UV, you may use either the left or right Skimmer UV mount on the
Standard Skimmerlter. If using the compact Skimmer Filter only use the center UV mount.

If using a single UV, a Bae Block can be used to prevent water movement through the
unused UV chamber. This provides improved UV exposure.

Place UV into skimmer by inserting the bulb into the UV mount.

Use a Philips screwdriver and the screws provided to secure the unit. Extra screws are
provided.

To start system: Plug UV into a GFCI protected outlet. UV must be used in conjunction
with a ground fault current interrupter socket (GFCI). (If you do not have a GFCI, contact a
licensed electrician before using the UV.)

Standard Skimmer Compact Skimmer

UV mounts

UV mount

3